“This site contains affiliate links for which OEMDTC may be compensated” |
March 6, 2019
Listed GVWR Exceeds Safety Chain Rating
The incorrect GVWR may result in the safety chains being insufficient to retain the trailer in the event that the trailer unhooks from the tow vehicle, increasing the risk of a crash.
NHTSA Campaign Number: 19V168
Manufacturer Highland Ridge RV
Components EQUIPMENT
Potential Number of Units Affected 74
Summary
Highland Ridge RV (Highland) is recalling certain 2019 Mesa Ridge Lite 2804RK and Open Range Ultra Lite 2804RK travel trailers. The Gross Vehicle Weight Rating (GVWR), shown on the label as 7,675lbs, exceeds the safety chain rating of 7,600lbs. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, “Tire Selection and Rims.”
Remedy
Highland has notified owners and provide corrected labels, free of charge. The recall began March 18, 2019. Owners may contact Highland RV’s customer service at 1-260-768-7771. Highland’s number for this recall is 9904427.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
GVWR Correction on Labels
Bulletin Type: | Recall | Publication Date: | March 2019 |
Bulletin #(s): | US 19V-168 CN 2019-124 | Make(s): | Highland Ridge |
Job Code(s): | 9904427 | Model(s): | Mesa Ridge Lite 2804RK
Open Range Ultra Lite 2804RK |
Flat Rate(s): | .3 hour | ||
Model Year(s): | 2019 |
Incident: | GVWR noted as 7,675 lbs. when 7,600 lbs. is correct |
Affected Units: | 2019 Mesa Ridge Lite
K3MU3051-3082 2019 Open Range Ultra Lite K3UH3051-3107 |
Parts: | Federal Certification Label
Cargo Carrying Capacity (CCC) Label CSA Data Sheet Labels are included with Recall Notification Letter |
Misc. Tools & Supplies: | Isopropyl alcohol Clean rag |
REMOVE EXISTING FEDERAL ID AND CCC LABELS:
- Remove the existing labels located on the front exterior off door side of the trailer.
- Use isopropyl alcohol and a clean rag to remove any adhesive residue from the surface
- Allow the area to dry for at least 30 seconds.
APPLY NEW LABELS:
- Remove the protective backing from each new label. Align the new label in the same location of the original and apply it to the surface. Remove any air bubbles.
DO NOT COVER GRAPHICS OR LOGOS ON THE EXTERIOR OF THE TRAILER WITH NEW LABELS.
NOTE: Do not attempt to remove or adjust the label once it has come in contact with the surface. Doing so may damage the label or cause it not to adhere properly to the surface. IF THE LABEL IS DAMAGED OR WILL NOT PROPERLY ADHERE TO THE SURFACE, CONTACT SERVICE FOR A NEW LABEL. Labels for a recall cannot be obtained through the Parts Department.
CSA DATA SHEET:
- Locate the existing CSA Data Sheet, inside the upper cabinet with the Command Center switches mounted to it.
The cabinet has glass doors and is directly across from the entrance door.
DO NOT TRY TO REMOVE THE EXISTING DATA SHEET.
- Wipe off the existing Data Sheet with a DRY rag to remove any dust or dirt on the surface. Do NOT use any wet cleaner on the existing label as it may absorb the liquid adversely affecting the adhesive on the new.
- Remove the backing from the new Data Sheet and align with the existing inside the cabinet. Apply the new on top of the old. Remove any air bubbles.
Safety Recall: 19V-168 2019-124
March 2019
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle «vin»
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Highland has decided that certain Model Year 2019 Mesa Ridge Lite 2804RK and Open Range Ultra Lite 2804RK travel trailers fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 110, “Tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less”.
Reason for this recall | The Gross Vehicle Weight Rating (GVWR) was noted on the Federal Certification label and Cargo Carrying Capacity (CCC) label as 7,675lbs. when the correct GVWR for the rating of the safety chains installed is 7,600lbs. This error could allow consumer to inadvertently overload the trailer which may lead to drivability issues, causing a crash. |
Recall Remedy | Replace all labels noting GVWR as 7,675lbs. Correct labels are included with this notification. |
What we need you to do | You may replace the labels following the enclosed instructions or contact a Highland Dealer to set an appointment to replace the incorrect labels at no charge. If you choose to perform the recall remedy, please complete and return the enclosed Reply Form so we can note the recall as complete. |
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 877-288-8400. If after contacting your dealer and Customer Service you are not able to have the safety defect remedied without charge and/or within a reasonable time, you may wish to submit a written complaint to the Administrator, national Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Highland Ridge
IMPORTANT SAFETY RECALL
Safety Recall: 19V-168
2019-124 March 2019
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Highland has decided that certain Model Year 2019 Mesa Ridge Lite 2804RK and Open Range Ultra Lite 2804RK travel trailers fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 110, “Tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less”.
Reason for this recall | The Gross Vehicle Weight Rating (GVWR) was noted on the Federal Certification label and Cargo Carrying Capacity (CCC) label as 7,675lbs. when the correct GVWR for the rating of the safety chains installed is 7,600lbs. This error could allow consumer to inadvertently overload the trailer which may lead to drivability issues, causing a crash. |
Recall Remedy | Replace all labels noting GVWR as 7,675lbs. Correct labels are included with this notification |
All pertinent information regarding this recall is available under the Service and Parts Tab of our Website. If you need further assistance, please contact Customer Service at 877-288-8400. | |
What we need you to do | Our records show the following unit is affected by this recall and is currently part of the inventory at your Dealership. The Recall Remedy must be completed on this unit prior to customer delivery. |
VIN
Federal law requires that all units in your inventory be repaired prior to delivery to a customer. If you have sold a unit recently that you have received a stock recall notice on, please contact the owner immediately to advise of the recall. In addition, please register the unit by submitting the Warranty Registration.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Highland Ridge
2 Affected Products
Vehicles
HIGHLAND RIDGE | MESA RIDGE | 2019 |
HIGHLAND RIDGE | OPEN RANGE ULTRA LITE | 2019 |
11 Associated Documents
Remedy Instructions and TSB
RCRIT-19V168-1929.pdf 1342.369KB
Manufacturer Notices(to Dealers,etc) – 19V-168 Dlr Ltr
RCMN-19V168-1560.pdf 188.698KB
Non-Compliance Notice 573 Report FMVSS 110
RCLRPT-19V168-2182.PDF 212.639KB
Miscellaneous Document – 19V-168 2019-124 Reply Form
RMISC-19V168-9042.pdf 509.398KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V168-9070.pdf 160.074KB
Recall Acknowledgement
Remedy Instructions and TSB
RCRIT-19V168-7810.pdf 588.051KB
Recall Quarterly Report #1, 2019-1
RCLQRT-19V168-9904.PDF 211.133KB
Recall 573 Report – Amendment 1
RCLRPT-19V168-5852.PDF 212.68KB
Recall 573 Report – Amendment 2
RCLRPT-19V168-9548.PDF 212.635KB
Recall Quarterly Report #2, 2019-2
RCLQRT-19V168-6104.PDF 211.233KB
Latest Recalls Documents
- 【HIGH STRENGTH GRADE】Trailer chains with hooks is G80 standard and have outstanding tensile strength. It has a higher safe working load than lower grade chains, but the weight is the same.
- 【Chain Retainer】Weld-On Safety Chain Retainer has a removable clevis pin for ease of painting and chain replacement.
- 【SAFE AND DURABLE】G80 towing chain is made of heat-treated alloy steel with galvanized surface, which is strong and corrosion-resistant, and can be used in harsh environments.
- 【UPGRADED DESIGN】The chain retainer has a removable zinc-plated pin and cotter for easy chain installation and replacement. For towing safety, it is recommended to use two safety chains.
- 【WIDE APPLICATION】Safety chain provides additional protection for towing heavy vehicles and vessels, preventing the two vehicles from completely separating if the connection is broken. Working Load Limit: 4900 LBS.
- DEPENDABLE SAFETY. This trailer safety chain is designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing
- HIGH-STRENGTH. This trailer chain has a grade-30 rating and a minimum break force of 2,000 lbs. (two trailer safety chains advised; each safety chain must meet or exceed the gross trailer weight)
- READY TO COUPLE. For safe, secure coupling to the vehicle, this 48-inch long trailer chain comes with two pre-attached safety chain hooks. The 3/8-inch S-hooks are fast and easy to install
- EASY TO USE. When connecting safety chains for towing, two chains should be used. The safety chains should be crossed once underneath the coupler and hooked onto the trailer hitch receiver safety chain loops
- CORROSION-RESISTANT. This trailer safety chain is constructed from 3/16-inch diameter, high-strength steel links and is protected with a durable zinc plating to resist rust and corrosion in spite of the outdoor elements
- Welded solid steel links with weather-resistant zinc-plated finish for dependable performance
- Hook at each end has a spring clip to prevent accidental disengagement
- Class II; meets all SAE specifications
- Note: for safety, 2 chains are required per trailer
- Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
- [ UPGRADE EQUIPMENT G80 ] -- Heavy duty grade 80 transport chain is made using high-strength, heat-treated alloy.G80 chains provide a higher safe working load than lower grade chains, but weigh the same.
- [ PROFESSIONAL DESIGN ] -- Designed for connecting from your trailer to your vehicle to help resist complete vehicle-trailer separation during a disconnect. When connecting safety chains for towing, two chains should be used.
- [ HEAVY DUTY CONSTRUCTION ] -- The high quality, standard link 5/16" size chain is heat-treated, and strength tested for superior quality. The chain retainer has a removable zinc-plated pin and cotter for easy chain installation and replacement.
- [ RELIABLE TRANSPORTATION ] -- This trailer safety chain has a grade-80 rating, providing exceptional tensile strength and resisting abrasions and wear from heavy cargo. Yellow zinc chromate finishes for corrosion protection and makes it easy for DOT officials to recognize.
- [ SAFE & COMPLIANT ] -- All our grade 80 chains and clevis snap hook is embossed with the proper markings to meet NACM standards. You will be compliant with any roadside inspection. Please feel free to us if you have any problems. (Each safety chain must meet or exceed the gross trailer weight!!!)
- New 3/16" x 48" Grade 30 zinc plated steel trailer safety chain with 2 x S hooks w/safety latches 2pcs.
- Item Includes 2 x S hooks with safety latches
- Made by zinc plated alloy steel to prevent rust and grade 30 standard .
- Using for light duty trailer.
- NBJINGYI specializes in the production of trailer accessories. It has a group of professional and advanced production equipment and technical personnel who can provide customers with high-quality products at reasonable prices.
- 2 Pack of 3/16" x 48" Trailer Safety Chain
- Working Load Limit. 3,500 lbs
- Each Chain Has a Clevis Grab Hook on Each End
- Fit type: Universal Fit
- Easy to use operation
- [ POWERFUL GRADE G80 ] -- Heavy duty grade 80 transport chain is made using high-strength, heat-treated alloy.G80 chains provide a higher safe working load than lower grade chains, but weigh the same.
- [ HEAVY DUTY CONSTRUCTION ] -- The high quality, standard link 3/8" size chain is heat-treated, and strength tested to ensure that the chain is not easy to break and operates more stable. Forged hook with safety clip at the chain end makes the trailer process safer.
- [ UPGRADE EQUIPMENT ] --The grade of the traction chain is Grade 80, with excellent tensile strength and long service life. Color zinc plating surface treatment, rust prevention and corrosion resistance,and makes it easy for DOT officials to recognize.
- [ DESIGN FOR SECURITY ] -- Designed for connecting from your trailer to your vehicle to help resist complete vehicle-trailer separation during a disconnect. With a 7,100 pound Safe Working Load and a 4:1 safety factor. It is very suitable for the towing of heavy vehicles and ships.
- [ PROFESSIONAL & COMPLIANT ] -- All our grade 80 chains and both G70 forged hooks are embossed with the proper markings to meet NACM standards. You will be compliant with any roadside inspection. Please feel free to us if you have any problems. (Do not exceed work load limit!!!
- 2 Pack of 5/16" x 35" Trailer Safety Chain
- Working Load Limit: 18,800 lbs.
- Each Chain Has a Clevis Grab Hook on Each End
- Fit type: Universal Fit
- Easy to use operation
- PRODUCTS INCLUDE: 2 x G80 trailer chain, 2 x G70 5/16" clevis snap hook and 2 x chain retainer. Versatility at its finest, designed to meet the varied needs of contractors landscapers and hobbyists
- QUALITY MATERIAL: Made of high-quality alloy steel, also known as manganese steel, through medium frequency high-temperature heat treatment. G80 heavy duty chain provide a higher safe working load than lower grade trailer chains, but weigh the same
- COMMODITY STRENGTH: Our 5/16" chain hook / grab hook are made of forged steel with break strength of 19,600 lbs, making them the epitome of heavy-duty, industrial strength
- MULTI APPLICATION: The tow chain work well with grab hooks for securing your load or for tow anchors. Grab hooks offer an open design, while slip hooks feature a safety latch for added protection. Ideal for flatbed trailers, tractor bucket
- WONDERFUL PRESENT: It's also a great idea to give a tow chains with hooks as a present! The 3/8 chain is widely used in farm, automobile, etc. If you are looking for a trailer chain to provide a useful, SALIFTFE's chain is what you are looking for
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.