| “This site contains affiliate links for which OEMDTC may be compensated” |
June 17, 2019 NHTSA CAMPAIGN NUMBER: 19V456000
Drive Shaft Support Cross Member May Fail
If the cross member fails, the components that it supports may come loose from the vehicle, increasing the risk of crash.
NHTSA Campaign Number: 19V456
Manufacturer Autocar, LLC
Components STRUCTURE
Potential Number of Units Affected 357
Summary
Autocar, LLC (Autocar) is recalling certain 2013-2018 Autocar Xpeditor vehicles. The drive shaft support cross member may fail.
Remedy
Autocar will notify owners, and dealers will install additional support brackets and cross members and replace any damaged components, free of charge. Autocar issued owners an interim notification on August 7, 2019. Owners may contact Autocar customer service at 1-888-218-3611 or 1-877-973-3486. Autocar’s number for this recall is ACX-1906.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s) with the VIN(s) indicated on the enclosed owner response cards.
AUTOCAR, LLC SAFETY RECALL ACX-1906
NHTSA RECALL NO. 19V456
August 2019
Dear Autocar Truck Owner:
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has decided that a defect which relates to motor vehicle safety exists in 357, 2013-2018 model year Xpeditor chassis. These chassis were manufactured between February 6, 2013 and April 9, 2018 with non-sequential serial numbers in the range 215900 through 226708. Our records indicate that your vehicle was manufactured within this time period and may contain the defect described herein.
| MODELS AFFECTED: | Autocar Xpeditor MY 2013-2018 |
| COMPONENTS AFFECTED: | The drive shaft support cross member may fail |
| SAFETY DEFECTS AND POTENTIAL RISKS: | If the cross member is used to support components such as the drive shaft center bearing, in the event of a failure such components may not be supported and may become loose, detached from the vehicle or damage other components during operation, increasing the risk of a crash, personal injury or property damage. |
| REPAIR REQUIRED: | The drive shaft support cross member will be replaced at no charge. |
| TIME REQUIRED FOR THE REPAIR: | The labor time to repair your vehicle is 10.5 hours. |
| WHAT YOU SHOULD DO: | This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming recall to correct the issue noted above. The parts required for the repair are being procured and we expect to have components available within the next 60 days. You may continue to operate your vehicle. The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your local authorized Autocar service site or email warranty@autocartruck.com. If you have questions or concerns regarding this notification, please contact Autocar technical support at 888-218-3611. |
| PRIOR REPAIRS: | If you have previously paid for repairs relating to this recall you may be entitled to recover the amount you paid for those repairs. Submit a copy of all documentation supporting your claim to Autocar at the address set forth below in the “Assistance” section. |
| NOTICE REGARDING LEASED VEHICLES: | If you are a Lessor (as defined below) of a vehicle that is affected by this notice, you are obligated under federal law to provide a copy of this Notice to the lessee of such vehicle within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the lessee(s) to whom you send a copy of this Notice, the date you send the Notice and the VIN of the vehicle that you have leased to the lessee(s).
For purposes of this Notice, the term “Lessor” means a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the date of this Notice. |
| OWNER RECALL RESPONSE CARD: | The enclosed Owner Recall Response Card identifies your vehicle. Please complete this postage-paid card and return it to Autocar. If you do not own, have sold or have traded the vehicle identified on the card, please indicate that on the postage-paid card and return it to Autocar. |
| ASSISTANCE: | If you need assistance with this recall, call our toll-free numbers below or write to Autocar at:
Autocar, LLC You may also submit a complaint to: Administrator or call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov. |
We regret any inconvenience this recall may cause, but we hope you recognize Autocar’s concern for your safety and satisfaction with your vehicle.
Sincerely,
AUTOCAR, LLC
ACF 00002 Rev. 000
551 South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
6 Affected Products
Vehicle
| AUTOCAR | XPEDITOR | 2013-2018 |
3 Associated Documents
Recall Acknowledgement
RCAK-19V456-3638.pdf 245.272KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-19V456-2300.PDF 215.597KB
Loading...
Interim Owner Notification Letter(Part 577)
RIONL-19V456-2356.pdf 217.23KB
Loading...
Latest Recalls Documents
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Works in tight spaces and makes gear oil easier to use.Fit Type: Universal
- Full Synthetic formula for exceptional high and low temperature protection
- Contains an extreme pressure additive for better load carrying capacity and wear protection
- Excellent thermal stability designed to protect oil from high temperature breakdown
- Formulated for ultimate gear protection and performance
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
- Direct replacement for Mercury
Marine 858058K01 - Provides maximum protection against excessive wear, corrosion and pitting for extended gear life in marine applications
- Contains additives to protect gears if water enters the gear case or lower unit
- Recommended for use in outboard motor gear cases and marine lower units in applications below 75hp
- 80W-90 viscosity
Marine 858058K01
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
- EXTREME-PRESSURE PERFORMANCE: U1P-Gear 80W90 Gear Oil, API GL-5, defends against high-speed, low-speed, and high-torque conditions, minimising wear from shock loads with superior anti-scuffing additives.
- TEMPERATURE RESILIENCE: With exceptional thermal stability, our 80W-90 differential fluid safeguards against severe temperatures, ensuring longevity and cleanliness for extended service life.
- PRECISION WEAR PROTECTION: Formulated with anti-wear additives, this API GL5 gear oil shields gear teeth from pitting, spalling, and scouring, offering advanced protection against scuffing, corrosion, and chattering.
- VERSATILE APPLICATION: Recommended for conventional hypoid differentials and manual transmissions, this product is ideal for passenger cars, trucks, SUVs, and vans, meeting API GL5 / GL4 gear oil specifications.
- SHEAR STABILITY AND ANTI-CORROSION: The shear-stable formulation resists rust, oxidation, foaming, and varnish, guaranteeing reliable performance and corrosion protection in diverse driving conditions.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.