“This site contains affiliate links for which OEMDTC may be compensated” |
June 17, 2019 NHTSA CAMPAIGN NUMBER: 19V465000
Non-DOT Brake Line Fittings/FMVSS 106
If the brake lines leak, the parking brake may drag, increasing the risk of crash.
NHTSA Campaign Number: 19V465
Manufacturer Altec Industries Inc.
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 328
Summary
Altec Industries Inc. (Altec) is recalling certain 2003-2019 Altec AD108 Cable handlers and HLIW-T Trailer Mounted Insulator Washer vehicles. The vehicles may be equipped with non-DOT brake line fittings that may leak at the air fittings. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 106, “Brake Hoses.”
Remedy
Altec will notify owners, and dealers will inspect the vehicles and replace the brake line air fittings if necessary, free of charge. The recall began July 31, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec’s number for this recall is CSN 723.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle. See attached serial number list.
NHTSA Safety Recall
No. 19V-465
July 25, 2019
Dear Altec Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act, and Canada Motor Vehicle Safety Act.
Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in certain AD108 and HLIW-T Units. These units have the possibility non-DOT approved adapters used in brake lines. The non-DOT approved adapters can possibly cause leaks in the brake line air system resulting in death or serious injury.
Refer to CSN 723 for the items covered under the warranty policy. Altec will supply, free of charge, replacement adapters to correct this condition.
In order to determine if your unit is affected by CSN 723, compare the serial number of your unit with the list of affected units attached to the CSN. The repair can be performed by the customer or you may contact Altec at 1-877-GO-ALTEC (1-877-462-5832) for further assistance. The repair is expected to take 1.5 hours to complete.
At any time, you may contact Altec at 1-877 GO ALTEC (1-877-462-5832) with your unit’s serial number to determine if there are any other outstanding notices.
For US owners: after contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov.
For Canadian Owners: if you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec Customer Service at 1-877-GO-ALTEC (1-877-4625832).
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. If you have sold or retired the unit please call Altec at 1-877-GO-ALTEC (1-877-4625832) so the records may be changed.
If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice.
We are sorry to cause this inconvenience; however we are taking this action in the interest of your safety and continued satisfaction with Altec products.
Thank you for your immediate attention on this important matter.
Customer Service Notice
July 25, 2019 Units Affected: AD108 and HLIW-T (see attached list)
Brake Air Line Fitting Replacement
Altec is committed to providing our customers with safe and reliable products from initial delivery throughout the useful life of the machine.
Push-to-connect air fittings are commonly used in the mobile equipment industry to attach air brake system components to each other. Altec has discovered that non-DOT rated push-toconnect fittings have been used on some HLIW-T and AD108 products. Non-DOT rated air fittings should not be used in braking applications.
Air fittings with a plastic collar ring used to hold the tubing or a collar ring that does not have the letters DOT stamped on the side (refer to Figure 1) are not to be used with brake systems. Altec requires that all push-to-connect air fittings on the affected units be replaced with fittings with a DOT rating at the next service interval, but no later than 90 days after receiving this CSN.
Select the DOT compliant fittings kit from the chart below and order by calling 1-877-GO ALTEC (1-877-462-5832).
990840052 HLIW-T Air Brake Kit
990842095 AD108 Air Brake Kit
This repair is covered under the Altec Warranty Policy and can be performed by Altec, the customer, or the customer’s warranty provider. Altec will perform the repair for free at an Altec facility. If the customer, or the customer’s warranty provider performs the repair, a warranty claim must be submitted to be reimbursed for the cost of the parts and/or labor. Altec will allow up to $135 for the labor to perform this repair. Call 1-877-GO ALTEC (1-877-4625832) to schedule the work to be done by an Altec service technician. Customers are responsible for the travel costs of an Altec Mobile Service technician if the technician performs the repair at the owner’s location.
34 Affected Products
Vehicles
ALTEC | AD108 | 2003-2019 |
ALTEC | HLIW-T | 2003-2019 |
7 Associated Documents
Recall Quarterly Report #2, 2019-4
RCLQRT-19V465-2447.PDF 211.234KB
Recall Quarterly Report #3, 2020-1
RCLQRT-19V465-0129.PDF 211.318KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V465-9049.PDF 211.136KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V465-1801.pdf 50.631KB
Recall 573 Report- Amendment 1
RCLRPT-19V465-5758.PDF 212.338KB
Non-Compliance Notice 573 Report
RCLRPT-19V465-1590.PDF 212.335KB
Recall Acknowledgement
RCAK-19V465-2348.pdf 247.231KB
Latest Recalls Documents
“This site contains affiliate links for which OEMDTC may be compensated” |
- 43 PCS PACKAGE: The DOT air brake fittings kit includes: 6 pcs brass tube tee fittings, 6 pcs brass straight union connectors, 14 pcs brass straight push connectors NPT thread, 14 pcs 90°elbows NPT thread, 2 pcs brass 1/4" inflation Schrader valve, 1 pc tube cutter. Air brake fitting assortment types: 1/8", 1/4", 3/8", 1/2"
- PREMIUM QUALITY: Our DOT air hose fittings are made of high-quality CA360 brass, meets D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life
- MAX WORKING INTENSITY: The brass fittings can be operated in pressures from vacuum to 800 psi and temperatures from -65°F to +200°F (-40°C to +93°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations
- EASY INSTALLATION: The quick connect design and precise NPT threading make installation of air brake accessories easy, just push to connect. And there is pre-applied sealant on NPT male thread for better sealing
- WIDE APPLICATION: The brass DOT air brake fittings can be used with air suspension systems, copper tubing in airlines brake systems, perfect for truck /RV repair air line leak, also ideal for industrial workshops, daily garden or lawn mower repair, towing machine hose connection, etc
- D.O.T APPROVED PREMIUM QUALITY: DOT air hose fittings are made of high-quality CA360 brass, meets D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.dot air brake fitting type: 1/4" 1/8" 3/8" 1/2"
- 85 PCS DOT AIR LINE FITTING KITS: The dot air fittings kit include 12PCS DOT Union , 6PCS DOT Tee , 4PCS Bushing, 6PCS 90⁰ DOT Male Elbow Connector, 8PCS DOT Straight Male Connector , 4PCS 45⁰ DOT Male Elbow Connector , 2pcs Compression Fittings 1/4" tube x 1/4" NPT Male,2pcs Schrader Valve,42pcs sleeves ferrules,1pc 4m teflon tape. Fitting types: 1/4", 3/8", 1/2",1/8"
- EASY TO INSTALL: Our Dot air fitting kit quick disconnect simply push tubing in, need to use tools to fix loose parts to handle in tight places, so that use will be more firm and not easy to fall off.And pieces that contain a threaded end already have sealant pre applied to provide a secure connection
- TYPICAL APPLICATION:DOT Air Brake Line Fittings kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair
- PRESSURE RANGE: Air line fittings pressure resistance, not easy to trip.Air brake fittings working pressure from vacuum max to 300 psi. Temperature Range: -65° F to +200° F. Note: see tubing manufacturer’s recommendations for pressure and temperature mutations
- 【PREMIUM QUALITY】MuHize DOT air hose fittings are made of high-quality CA360 brass, meets D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.
- 【MAX WORKING INTENSITY】MuHize DOT brake line fittings can be operated in pressures from vacuum to 250psi ((17.2 bar) and in temperatures from -40°F to +200°F (-40°C to +93°C).
- 【EASY TO INSTALL】MuHize DOT air fitting kit quicks disconnect push tubing in, you need to use tools to fix loose parts to handle in tight places so that use will be firmer and not easy to fall off. And pieces that contain a threaded end already have sealant pre-applied to provide a secure connection.
- 【WIDE APPLICATION】MuHize brass DOT air brake fittings can be used with air suspension systems, copper tubing in airlines brake systems, perfect for truck /RV repair air line leak, also ideal for industrial workshops, daily garden or lawn mower repair, towing machine hose connection, etc.
- 【PACKAGE INCLUDES】MuHize 23 pcs DOT air brake fittings kit includes: 8 pcs 1/4 inch straight union DOT fittings, 8 pcs 3/8 inch straight union DOT fittings, 6 pcs 1/2 inch straight union DOT fittings, 1 pc tube cutter. DOT quick connect fitting assortment types: 1/4", 3/8", 1/2".
- 76 PCS PACKAGE: The 76 pcs DOT air line fittings assortment includes: 6 pcs brass tube tee fittings, 14 pcs brass straight union connectors, 20 pcs brass straight push & NPT thread, 13 pcs 90°elbows NPT thread, 9 pcs 360° swivel elbows NPT thread,4 pcs 45°elbows NPT thread, 6 pcs brass bushings, 2 pcs brass 1/4" inflation Schrader valve, 1 pc tube cutter, 1 pc Teflon tape. Air brake line fittings types: 1/8", 1/4", 3/8", 1/2"
- PREMIUM DOT FITTINGS: CheeMuii DOT air hose fittings are made of CA360 pure brass, meet D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life
- AIR SUSPENSION VALVE: CheeMuii 1/4" inflation Schrader valves are made of CA360 pure brass, which is durable and corrosion-resistant. Thread length: 3/4". Provide a manual inflation point to air spring suspension bags. Each expansion valve is equipped with a protective cap to prevent dirt and mud
- MAX WORKING INTENSITY: The brass fittings can be operated in pressures from vacuum to 800 PSI and in temperatures from -40°F to +248°F (-40°C to +120°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations
- EASY INSTALLATION: The quick connect design and precise NPT threading make installation of air brake accessories easy, just push to connect. And there is pre-applied sealant on NPT male thread for better sealing
- PREMIUM MATERIAL: The dot air line fitting is made of high quality CA360 brass, meets D.O.T FMVSS 571.106 and Air Brake System Requirements. With corrosion resistance, high temperature ductility and low permeability. Long service use, dot air brake fitting type: 1/8" 1/4", 3/8", 1/2", 5/8"
- WORKING PRESSURE & TEMPERATURE: Air line fittings pressure resistance, not easy to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -65° F to +200° F
- EASY TO INSTALL: Our dot air fitting kit quicks disconnect push tubing in, you need to use tools to fix loose parts to handle in tight places so that use will be firmer and not easy to fall off. And pieces that contain a threaded end already have sealant pre-applied to provide a secure connection
- WIDELY APPLICATION: Air brake fittings assortment kit can be used with air systems, copper tubing in airline brake systems, which is perfect for automotive car or truck repair, air operated seats, operating gauges, air horns, industrial workshops, air brake connections, towing machine hose connection and air brake connections or lawn mower repair
- PACKAGE INCLUDES: The dot air brake fittings kit package includes 119pcs: 17pcs union connectors,5pcs tube tees,11pcs 90°elbows NPT Thread,10pcs straight male connectors NPT Thread, 14pcs hex bushing,2pcs schrader valve,60pcs sleeves ferrules,1pc 4m teflon tape
- PREMIUM MATERIAL: Quick connect air line fittings kit made of high quality Polybutylene Terephtalate (PBT) and with stainless steel lock claw and good steel washers for a thousand bounces. High pressure resistance, can withstand strong pressure without tripping out. Great for long term use
- AIR LINE FITTING KITS SET: Air hose fitting kit package includes 45 pcs fittings: 16 pcs straight push connectors. 10pcs 90°elbows connectors. 6pcs straight tube union connectors. 6pcs tube tees. 5pcs 90°elbows NPT Thread . 2pcs 90°tee NPT Thread Push fitting types: 1/4", 3/8", 1/2",1/8"
- EASY TO INSTALL: All the air fittings quick connect fittings easy to install, flexible and space-saving, 360-degree rotate, release rings adopt ellipse design, which can be removed conveniently, no extra sealing needed, Release rings at the top could be pushed down easily when inserting the hose into the coupler and bouncing up immediately when taking out the hose
- APPLICATION: Push-to-connect fittings are suitable for PU / PA / PE / PVC tubes or hoses. They are widely applied in automotive, manufacturing production lines or truck or trailer repairs. Besides those, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair
- PRESSURE RANGE: Air line fittings working pressure from air vacuum to 145 psi,0-0.9Mpa.Temperature Range: 0°F to +60°F(32°C to +140°C),Proof pressure: 1.32Mpa. Note: see tubing manufacturer’s recommendations for pressure and temperature mutations
- DOT FITTINGS SET: The dot air brake fittings kit package includes 74pcs: 13pcs union connectors,5pcs tube tees,10pcs 90°elbows NPT Thread,4pcs 45°elbows NPT Thread,10pcs straight male connectors NPT Thread, 4pcs hex bushing,2pcs schrader valve,26pcs sleeves ferrules,1pc 4m teflon tape
- PREMIUM MATERIAL: Our DOT air brake fittings are made of high-quality CA360 brass, Meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature ductility, and low permeability. Great for long-time use, dot air brake fitting type: 1/8",1/4",3/8",1/2",5/8"
- PRESSURE RANGE: Air line fittings pressure resistance, not easy to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -65° F to +200° F(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations)
- EASY TO INSTALL: Our dot air fitting kit quicks disconnect push tubing in, you need to use tools to fix loose parts to handle in tight places so that use will be firmer and not easy to fall off. And pieces that contain a threaded end already have sealant pre-applied to provide a secure connection
- TYPICAL APPLICATION: Air brake fittings assortment kit can be used with air systems, copper tubing in airline brake systems, which is perfect for automotive car or truck repair, air operated seats, operating gauges, air horns, industrial workshops, air brake connections, towing machine hose connection and air brake connections or lawn mower repair
- 101 PCS AIR LINE FITTING KITS : Dot air fittings assortment include 4PCS DOT Union, 2PCS DOT Tee, 6PCS Bushing, 4PCS 90⁰ DOT Male Elbow Connector, 4PCS DOT Straight Male Connector , 2PCS 45⁰ DOT Male Elbow Connector , 2PCS Union Compression,2PCS Tee 1/4" tube x1/8"npt, 2PCS Compression Fittings 1/4" tube x 1/4" NPT Male ,40PCS sleeves ferrules, 12PCS Compression Nut ,20PCS Compression Inserts Tube 1/4",1pc 3m teflon tape. Fitting types: 1/4", 3/8", 1/2",1/8"
- PREMIUM QUALITY: DOT air line fittings are made of high-quality CA360 brass, meets D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.dot air fittings type: 1/4" 1/8" 3/8" 1/2"
- EASY TO INSTALL: Our Dot Quick Connect Hose Fittings quick disconnect simply push tubing in, need to use tools to fix loose parts to handle in tight places, so that use will be more firm and not easy to fall off.And pieces that contain a threaded end already have sealant pre applied to provide a secure connection
- TYPICAL APPLICATION:DOT Air Line Fittings kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair
- WORK PRESSURE RANGE: Air line fittings pressure resistance, not easy to trip.Air brake fittings working pressure from vacuum max to 300 psi. Temperature Range: -65° F to +200° F Note: see tubing manufacturer’s recommendations for pressure and temperature mutations
- [High-quality Material & Meets D.O.T. FMVSS 571.106 Approved]: The HOTROSE 52PCS DOT air hose fittings are made of high-quality CA360 brass, meets SAE J1131 air brake system requirements. Anti-corrosion, high-temperature ductility, low permeability and can be used for long time.
- [HOTROSE 52PCS PACKAGE, 90° DOT Male Elbow(Rotatable) Included]: The Brass DOT Air Brake Line Fittings Assortment Kits includes: 6 PCS Tube Tee Fittings, 6 PCS Straight Union Connectors, 14 PCS Straight Push Connectors, 14 PCS 90° Elbows, 4 PCS 45⁰ DOT Male Elbow, 4 PCS 90° Male Elbow(Rotatable), 2 PCS Brass 1/4" Inflation Schrader Valve, 1 PC Tube Cutter, 1 PC Seal Pipe Tape. (Air brake fitting assortment types: 1/8", 1/4", 3/8", 1/2")
- [Can be Used in Harsh Environments]: These HOTROSE DOT Air Brake Line Fittings can be operated in pressures from vacuum to 250 psi and temperatures from -40°F to +200°F (-40°C to +93°C). (Note: Use it according to the tubing manufacturer's recommendations for pressure and temperature.)
- [Easy Installation & Seal Connected, Cutter and Seal Tape Packaged]: These HOTROSE DOT Air Brake Line Fittings are designed with quick connection and precise NPT threading, just push to connect to your tubes. And there is pre-applied sealant on NPT male thread for better sealing.(The packaged Cutter and Seal Tape make it more convenient and secure connection.)
- [Wide Applications]: These HOTROSE DOT Air Brake Line Fittings can be used with air systems, copper tubing in air lines brake systems, perfect for automotive car or truck repair, air operated seats, operating gauges, air horns, industrial workshops, air brake connections, towing machine hose connection, air brake connections, lawn mower repair, etc.
- REMIUM MATERIAL: Our DOT air brake fittings is made of high quality CA360 brass, meets D.O.T FMVSS 571.106 and Air Brake System Requirements. With corrosion resistance, high temperature ductility and low permeability. Long service use, dot air brake fitting type: 1/8" 1/4", 5/16", 3/8", 1/2", 5/8"
- DOT FITTINGS KIT:The dot push to connect air fittings package includes 86pcs : 17pcs union connectors, 9pcs 90°elbows male connectors, 9pcs straight male connectors, 7pcs hex bushing, 5pcs tube tees, 4pcs 45°elbows male connectors, 2pcs schrader valves, 32pcs sleeves ferrules,1pc 4m teflon tape
- TYPICAL APPLICATION: Brass air brake fittings assortment can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair
- MAX PRESSURE: Dot air line fittings assortment pressure resistance, not easy to trip. Air brake fittings working pressure from vacuum max to 300 psi. Temperature Range: -65° F to +200° F(Note: see tubing manufacturer's recommendations for pressure and temperature mutations)
- EASY TO INSTALL: Our DOT compression fitting disconnect simply push tubing in, need to use tools to fix loose parts to handle in tight places, so that use will be more firm and not easy to fall off. And pieces that contain a threaded end already have sealant pre applied to provide a secure connection
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.