NHTSA ID Number: 10162096
Manufacturer Communication Number: TSB170004-050720
Summary
This Technical Service Bulletin describes the verification and resolution of injector sleeve seal leakage causing fuel and coolant cross-contamination. Shrinkage of injector sleeve seal material can create a leak path between cylinder head cooling jacket and injector bore. This is an updated to a previously submitted communication.
1 Affected Product
Equipment
CUMMINS | ISX |
Technical Service Bulletin
| Technical Service Bulletin:
TSB170004 | Released Date: 07-May-2019 |
| Injector Sleeve Seal Leakage Causing Fuel and Coolant CrossContamination: Optional Repair | |
Injector Sleeve Seal Leakage Causing Fuel and Coolant Cross-Contamination: Optional Repair
Warranty Statement
The information in this document authorizes specific changes to the repair practice for failures covered under product warranty coverages.
Contents
Product Affected
- ISX CM570
- ISX CM870
- ISX CM871
- ISX CM871 E
- QSX CM570
Issue
Symptom:
- Fuel in coolant system
- Coolant in fuel system
- Fault Code 418: Water-in-fuel indicator
- Pressurized cooling system
Root Cause:
- Shrinkage of injector sleeve seal material can create a leak path between cylinder head cooling jacket and injector bore.
- Progressive damage could be seen on the lowest injector O-ring (green), Part Number 3347937.
Verification
- Injector sleeve seal material shrinkage is only one possible cause of symptoms discussed in this document. Published troubleshooting procedures must be followed to determine root cause.
- Inspection for fuel or coolant leakage past injector sleeve seal should only be completed when other possible sources of contamination, such as fuel heaters, have been ruled out.
Verification Step:
- Injector sleeve seal leaks are to be verified in-chassis by pressurizing cooling system. See corresponding Service Manual. Reference Procedure 002-014 in Section 2.
Note : If cylinder head has already been removed, injector sleeve seal leaks can be verified by leak testing coolant passage. See corresponding Service Manual. Reference Procedure 002-004 in Section 2.
Resolution
Note : If a cylinder head with base, extended, or parts warranty coverage is found to have leaking injector sleeves, the cylinder head must be replaced. The repair option described below is not for components in warranty
- Service O-ring, Part Number 5440257, can be used to replace the lowest green injector o-ring, Part Number 3347937, as an optional repair.
- The replacement of the lowest injector o-ring must be completed on all injectors. For removal and replacement information as well as maintenance concerning injector o-rings, see corresponding Service Manual. Reference Procedure 006-026 in Section 2.
- After injectors are installed, a leak check must be performed. See corresponding Service Manual. Reference Procedure 002-014 in Section 2.
- Inspect the fuel tank and filter for contamination.
Service Parts Availability
Service parts are available. See Table 1 below.
Publications Affected
| Table 2, Publications Affected | |||||
| Manual Type | Engine | Bulletin Number | Procedure Title | Procedure | Section |
| Service Manual | ISX:
CM570, CM870, CM871 QSX: CM570 | 3666239 | Injector Sleeve,
Cylinder Head | Refer to Procedure 002-014 (/qs3/pubsy s2/xml/en/procedures/1 0/10-002-014.html) | 2 |
Document History
| Date | Details |
|---|---|
| 2017-1-11 | Module Created |
| 2017-3-21 | Updated part number from 3347939 to 3347937. |
| 2017-3-28 | Updated Service Procedure link. |
| 2018-5-22 | Updated with optional repair. Updated to “yes” warranty statement. |
| 2019-4-15 | Added “Inspect the fuel tank or filter for contamination.” |
Last Modified: 07-May-2019
Technical Service Bulletin:
TSB170004
SaleBestseller No. 1
Zerex Asian Vehicle Red Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
- Formulated to replace the OEM fluid in Asian make vehicles such as Toyota , Lexus , Scion and others requiring a red, silicate free HOAT antifreeze/coolant
- 5 year/150, 000 mile . Silicate-free, long-life, phosphate Hybrid Organic Acid Technology chemistry
- The long life formula provides protection for all cooling system metals from rust and corrosion. The silicate free, borate free formula helps protect against harmful scale and deposits
- Meets the following OEM and industry specifications: JIS K 2234-1994, Hyundai/KIA MS 591-08, Mitsubishi ES-64217, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- Note: Please check the vehicle specification before purchasing the item.
SaleBestseller No. 2
Zerex Asian Vehicle Blue Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
- 5 year/150, 000 mile . Silicate-free, long-life, phosphate Hybrid Organic Acid Technology chemistry
- Formulated to replace the OEM fluid in Asian make vehicles such as Honda, Nissan, KIA, Hyundai and others requiring a blue, silicate free HOAT antifreeze/coolant
- The long life formula provides protection for all cooling system metals from rust and corrosion. The silicate free, borate free formula helps protect against harmful scale and deposits
- Meets the following OEM and industry specifications: Hyundai/KIA MS 591-08, Mitsubishi ES-64217, JIS K 2234-1994, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- Contains 30 – 50 ppm of denatonium benzoate as a bittering agent
Bestseller No. 3
Honda Genuine Extended Life Antifreeze/Coolant Type 2, 50/50 Pre-Diluted, 1 Gallon
- Genuine Honda Type 2 Long-Life Blue Coolant, pre-mixed 50/50 (ready to use)
- Protects metal and non-metal cooling system parts against corrosion and rust
- Freeze protection and boil-over resistance for extreme temperature performance
- Replaces part number OL999-9011 - matches factory fill for Honda systems requiring Type 2 coolant
- Long service life — up to 5 years or ~60,000 miles under normal conditions
Bestseller No. 4
PEAK OET Extended Life Blue 50/50 Prediluted Antifreeze/Coolant for Asian Vehicles, 1 Gal.
- 1 GALLON ENGINE ANTIFREEZE/COOLANT: Fully compatible with other extended life antifreeze/coolants. This item contains a bittering agent called Denatonium Benzoate.
- PROTECTS: Advanced formulation prevents rust & corrosion protecting all engine cooling system components
- DESIGNED FOR ASIAN VEHICLES: Recommended for use with Acura, Honda, Infiniti, Mitsubishi, Nissan, Subaru, and Suzuki vehicles that require a BLUE Phosphate-enhanced Organic Acid Technology (POAT) formula
- GUARANTEED: When installed as part of a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.
- 50/50 PREDILUTED FOR QUICK TOP OFFS: Already diluted to make topping off your cooling system a breeze
Bestseller No. 5
PEAK Global Lifetime Concentrate Antifreeze and Coolant for All Vehicles, 1 Gal.
- CONCENTRATE ANTIFREEZE AND COOLANT: Efficient formula is compatible with all vehicle cooling systems, providing fast-acting and long-lasting protection on all cooling system metals against rust and corrosion
- NON-ABRASIVE FORMULA: Created with Organic Acid Technology, this ethylene glycol-based coolant formula is compatible with other antifreeze and coolant formulations. This item contains a bittering agent called Denatonium Benzoate.
- ALL VEHICLE: Versatile and formulated for use in all American, Asian, and European automobiles including cars and low/medium to heavy duty trucks of all makes, models, and years
- SAFE FOR FILLS AND TOP-OFFS: The amber color will not effect the antifreeze currently in your cooling system
- LIFETIME PERFORMANCE: Provides cooling system protection for your automobile's entire lifetime with proper maintenance
This product presentation was made with AAWP plugin.