| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
July 31, 2019 NHTSA CAMPAIGN NUMBER: 19E051000
Battery Tray may Separate from F-550 Frame
If the battery tray detaches from the chassis, contents of the tray may fall out and become road hazard, and the battery may discharge. Either scenario increases the risk of a crash.
NHTSA Campaign Number: 19E051
Manufacturer MORryde
International, Inc.
Components EQUIPMENT
Potential Number of Units Affected 187
Summary
MORryde International, Inc. (MORryde) is recalling certain battery trays sold for installation on Ford F-550 chassis. The battery trays may have inadequate welds, allowing the battery tray to detach from the chassis.
Remedy
MORryde will notify the vehicle manufacturers the purchased the trays, and dealers for those manufacturers will install additional weld areas on both sides of the battery tray for additional support, free of charge. The recall began July 29, 2019. Owners may contact MORryde customer service at 1-574-293-1581.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Equipment
4 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-19E051-9136.pdf 112.526KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-19E051-3458.pdf 245.606KB
Loading...
Defect Notice 573 Report
RCLRPT-19E051-8589.PDF 213.271KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-19E051-8755.PDF 213.322KB
Loading...
Latest Recalls Documents
| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
Bestseller No. 1
NOCO BT27S Group 27 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
- Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 27 battery
- Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
- Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
- Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
- Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
Bestseller No. 2
Automotive, Marine, Boat, RV Battery Tray - Group 27 Series with Strap, Battery Holder (27 Series)
- Extreme-duty battery tray for Automotive, Marine, RV batteries
- Battery Tray is constructed from high impact, heavy polypropylene plastic
- Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
- Accommodates 27 series batteries up to 7" x 12.5", Safety Strap and buckle are included.
- 8 mounting points (4 per long length)
Bestseller No. 4
NOCO BT31S Group 31 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
- A rugged battery tray for group 31 batteries, including marine, RV, camper, and trailer batteries.
- Features a heavy-duty 42-inch hold-down strap with nylon resistant webbing that withstands a tensile load of over 120 kilograms of force.
- Impact-resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure.
- Keeps your battery securely mounted and limits battery movement during transportation and operation.
- Meets United States Coast Guard (USCG) Code of Federal Regulations 183.420, American Boat and Yacht Council (ABYC) E-10.7 specifications, and frustration-free packaging.
Bestseller No. 5
SaleBestseller No. 6
Universal Battery Tray Hold Down Trunk battery Relocation Box Billet Aluminum 551181 For Optima Race Racing Mount Red Yellow Blue Top 34 34/78 D34 D34/78 34M D34M Battery Mount
- Application - For Most Car and Truck batteries including the following optima sizes: For Red top: 34, 34R, 34/78 & For Yellow top: D34, D34/78 & For Blue top: 34M, D34M .
- Package includes: 1*Base plate, 1*Top plate, 3*All-thread hold downs, 3*thread sleeves & 6*Matching nuts.
- Quality - Made of high-quality aluminum alloy and iron, it is durable, rust-proof, and perfectly protects the battery.
- Features - Designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware.
- Perfect Design - Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).
SaleBestseller No. 7
Camco RV Large Battery Hold-Down Tray | Holds Automotive, RV, and Marine Batteries to Stop Movement During Transportation | (55404)
- Holds Batteries in Place: Safely holds group 27, 30 and 31 automotive, RV and marine batteries to stop movement during transportation.Fit Type: Universal Fit
- Safe and Durable Construction: Constructed of heavy-duty, acid-defiant plastic with stainless steel hardware
- Fit: Fits batteries up to 12 11/16-inches (L) x 6 ยพ-inches (W) x 8 ยพ-inches (H)
- Overall Dimensions: 13 1/8-inches (L) x 8 ยฝ-inches (W) x 10 3/8-inches (H)
- Includes: (1) tray, (2) rods, (1) cross bar and (2) knobs
SaleBestseller No. 8
Dorman 00097 Driver Side Battery Tray Replacement Compatible with Select Cadillac/Chevrolet/GMC Models
- Direct replacement - this battery tray matches the fit and function of the original equipment part
- Durable construction - this battery tray is made from quality materials to prevent damage caused by an unsecured battery
- Cost-effective solution - offers original equipment quality at lower cost than dealer replacement
- Quality tested - this part has undergone vehicle fitment and dimensional testing
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
SaleBestseller No. 9
THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)
- THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance.
- The groove design prevents the battery from contacting the tray fasteners; the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need.
- [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77
- [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R
- [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55
Bestseller No. 10
Metal Steel Battery Mounting Box Tray Bracket DIY,Easy Bolt-In Battery Tray,Overall Length - Fits up to a 10.63โ ร 7.06โ ร 7.5โ Battery, Anti-corrosion, No Rusting
- ใPowerful Supportใ The whole battery tray is made of steel. The steel sheet is connected to the steel sheet, the material is strong and has strong support, can easily carry the weight of the battery
- ใLonger LifeใThe battery box has multiple round holes that facilitate air circulation and reduce water retention. The round holes also facilitate heat dissipation, which can improve battery life
- ใAdjustable SizeใThe battery tray has adjustable bolts. This battery tray can hold batteries up to 10.63 "L ร 7.06 "W ร 7.5 "H, so it's compatible with most sizes of batteries. Please make sure that it is compatible with the size of the battery being used before selecting it
- ใEasy to install & Wide applicationsใThe Battery mounting box adopts simple bolt-on design, no need to re-solder. Easy to install, easy to disassemble, save more time and money. Can be used in a variety of scenarios, such as car racks, camping, self-built cabins or boat cabins
- ใMore SatelyใThe surface of the battery bracket adopts flame retardant plastic spraying process, which effectively prevents oxidation, rust and corrosion. The main material of the battery bracket is carbon steel, which has good insulating properties and prevents the spread of battery leakage, providing higher safety
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.