โThis site contains affiliate links for which OEMDTC may be compensatedโ |
November 19, 2019 NHTSA CAMPAIGN NUMBER: 19V829000
Incorrect Information on Certification Label/FMVSS
The incorrect weight rating information can result in overloading of the axles, increasing the risk of a crash.
NHTSA Campaign Number: 19V829
Manufacturer Daimler Trucks North America LLC
Components EQUIPMENT
Potential Number of Units Affected 2
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2020 Freightliner
Econic SD vehicles. The vehicle certification label contains the incorrect gross axle weight rating (GAWR) information. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 120, “Wheels and Rims- Other Than Passenger Cars.”
Remedy
DTNA reports that all affected vehicles have been remedied with new labels and tires, therefore owner notifications will not be sent. The recall began November 19, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-840.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
SEOCONTENT-START
DAIMLER -ยท -:-:~::.!f–
ยท~==~
December 19, 2019
Michelle Rice
Recall Analyst
;ยท~——–ยทยทยท ~
Department of Transportation
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE., Washington, DC 20590
Office: 202-366-1060
Subject: Econic SD Tire Axle Label
NHTSA NS No. – 19V-829
Manufacture number: FL-840
Ms. Michelle,
There will be no publications for noncom pliant recall for 19V-829.
Daimler Trucks North America
Andy Jones
Manager
Compliance and Regulatory Affairs
All vehicles within this recall campaign have been repaired with a corrected Gross Axle Weight Rating
(GAWR) label in November 2019 prior to any publications of a Dealer’s Bulletin or Owner Notification.
One was repaired while in transit and additional was repaired at the dealer.
Please contact me if you have any questions.
Sincerely yours,
Andy Jones
Manager
Compliance and Regulatory Affairs
Daimler Trucks North America, LLC
4747 N. Channel Avenue
Portland OR 972 17-7699
Phone: 503-745-8000
***********************************************************
–~
DAIMLE;R~~–
. c_-:ยท:~โข_
z: ::~;;;~~-=:_ :: ~ – — .
Defect Information Report
(Section 573.6)
FL-840
Date of Submission: November 19, 2019
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: 0 Safety Defect
Vehicle Information
Model Yr. Start:
Make: Freightliner
Model: ยฃconic SO
Production Dates:
2020
Begin: 08/08/2019
End: 08/08/2019
Descriptive Information:
X Non-Compliance
ModelYr. End: 2020
Certification labels on certain Freightliner ยฃconic SO Vehicles containing incorrect GAWR information.
Number potentially involved: 2 Estimated percentage of involve with defect: 100%
Defect/ Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On the affected vehicles the vehicle certification label contains the incorrect information and thus fails to
comply with the requirements of Federal Motor Vehicle Safety Standard No. 120, “Tire Selection and
Rims f or Motor Vehicles Other Than Passenger Cars.” The Gross Axle weight rating (GAWR), states 8000
Kgs, 18000 lbs, however the steer tires are only rated for 17,640/bs. The error was due to miscalculation
in the conversion from Kgs to lbs.
If a noncompliance, provide the applicable FMVSS:
FMVSS 120
Describe the safety risk:
Incorrect weight rating information on the certification labels could result in potential overloading of the
axles and increase the likelihood of a crash.
Chronology of Defect/ Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
Late September 2019, during development of the service literature, it was identified that the GA WR label
may be incorrect. October 2019, DTNA opens an investigation to identify potential field exposure.
November 2019, DTNA identified that there were vehicles in the field requiring repairs with new labels
and tires. November 12, 2019 DTNA determined that the labels did not comply with the certification
requirements set forth in FMVSS 120, therefore decided to conduct a voluntary compliance recall.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Field service indicated that all vehicles in the population have been repaired. DTNA will ensure that
repairs were performed with no cost to customer.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
All the vehicles in the population have been repaired. DTNA will not be notifying customers.
Planned Dealer Notification Begin Date:
Planned Dealer Notification End Date:
Planned Owner Notification Begin Date:
Planned Owner Notification End Date:
N/A
N/A
N/A
N/A
Manufacture’s identification code for this recall (if applicable): FL-840
DTNA Representative;
Andy Jones
Manager
Compliance and Regulatory Affairs
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
FREIGHTLINER![]() | ECONIC SD | 2020 |
8 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V829-8769.PDF 211.231KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V829-4697.PDF 211.137KB
Non-Compliance Notice 573 Report
RCLRPT-19V829-5494.PDF 212.711KB
Miscellaneous Document-573 Defect Information Report
RMISC-19V829-3851.pdf 406.261KB
Recall Acknowledgement
RCAK-19V829-9505.pdf 244.618KB
Miscellaneous Document
RMISC-19V829-6391.pdf 149.888KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V829-1340.PDF 211.311KB
Recall Quarterly Report #4, 2020-3
RCLQRT-19V829-2941.PDF 211.418KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- Full synthetic 5W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
- Improved wear performance with significantly increased level of protection against harmful engine wear (compared to previous generation API CJ-4 engine oils)
- Enhanced fuel economy capability of 1.5% without compromising engine protection or durability (compared to 15W-40 oils)
- Multi-functional dispersant additives provide an enhanced level of protection against the effects of soot, dirt, and other contaminants
- Resists breakdown by heat to provide continuous protection throughout the service interval, and also provides improved low-temperature flow compared to conventional 15W-40 oils
- Synthetic blend 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
- Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks โ including high-power vehicles that require resistance to heat and stress
- Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures
- Delivers good engine cleanliness and protection against piston deposits, ensuring engine and component reliability at extended oil drain intervals
- Advanced low-ash formulation helps control the blocking or poisoning of exhaust after-treatment devices, helping maintain vehicle emission compliance and engine fuel efficiency
- EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
- RESISTS OXIDATION AND FIGHTS DEPOSITS & SLUDGE with higher quality synthetic base oils and special inhibitors
- PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
- ADVANCED FUEL ECONOMY up to 1.5% over 15W-40 conventional oils in on-highway operations
- UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins
X15
/X12 engines when average is 7mpg or higher
- A premium synthetic blend, long drain mixed-fleet engine oil specifically formulated for on- highway applications, including 2017 greenhouse gas (GHG 17) compliant diesel engines
- Isozyme Advanced Technology: The Next Generation of Heavy Duty Engine Oil Chemistry - engineered to deliver longer oil life, better wear protection and longer engine life
- Isoclinal: Certified clean - ensure your lubricants meet OEM cleanliness requirements to help you minimize downtime, reduce maintenance costs and extend equipment life
- Provides high performance piston deposit control and turbocharger protection due to its superb oxidation performance. Its high performing detergent and dispersant additives provide excellent diesel engine component protection.
- Exceptional soot dispersancy and wear control - Cylinders, pistons, rings, and valve train components are well protected against wear and corrosion, providing optimum service life and minimal maintenance, contributing to maximum equipment utilization and minimal downtime.
- Excellent wear protection during severe operating conditions
- Oil durability: strong oxidation and viscosity control with less oil consumption
- Better contamination control with superior soot-busting, deposit-dispersing capability
- Strong stay-in-grade performance throughout the life of the oil
- Friction modified with micron moly and penetrate
- Full synthetic 5W-40 motor oil that is made with natural gas and designed to maximize engine protection
- Formulated for modern light-duty diesel and high-performance engines in European vehicles, including Fiat
, Mercedes-Benz
, Porsche
, Renault, and VW
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed*
- Delivers faster low-temperature oil flow and protection in extreme heat
- Protects horsepower and keeps engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40)
- A premium synthetic blend, long drain mixed-fleet engine oil specifically formulated for on- highway applications, including 2017 greenhouse gas (GHG 17) compliant diesel engines
- Isozyme Advanced Technology: The Next Generation of Heavy Duty Engine Oil Chemistry - engineered to deliver longer oil life, better wear protection and longer engine life
- Isoclinal: Certified clean - ensure your lubricants meet OEM cleanliness requirements to help you minimize downtime, reduce maintenance costs and extend equipment life
- Provides high performance piston deposit control and turbocharger protection due to its superb oxidation performance. Its high performing detergent and dispersant additives provide excellent diesel engine component protection.
- Exceptional soot dispersancy and wear control - Cylinders, pistons, rings, and valve train components are well protected against wear and corrosion, providing optimum service life and minimal maintenance, contributing to maximum equipment utilization and minimal downtime.
- Hot Shot's Secret Green Diamond uses a unique blend of Group III base oils to improve your engine's fuel economy by up to 3 percent; specialized blend gives Green Diamond formula excellent viscosity and reduces friction
- By improving fuel economy and reducing wear, Green Diamond Fleet Oil lowers your engine's overall fuel consumption by up to 78 percent compared to CJ-4 spec oils
- Compared to CJ-4 spec oils, Green Diamond Fleet Oil reduces wear and tear on your engine's components by 71 percent; synthetic oil product keeps your engine free from scarring so it can run like new
- Green Diamond Fleet Oil uses patented FR3 nanotechnology lubrication with CK4 Additive packaging to keep your oil clean and increase your horsepower; 15W-40 engine oil excels in vehicles subjected to demanding operating conditions
- Patented FR3 nanotechnology gets into the fine crevices of your engine to create smooth, slick surfaces that minimize metal-on-metal contact for the longest possible service life
- Exceptional resistance to high-temperature varnish and low-temperature sludge deposits to help keep engines clean
- Wide viscosity range provides outstanding protection consistent with an SAE 40 grade oil at high temperatures, combined with the easy cold-start performance of a 5W rated oil
- Outstanding wear protection
- Excellent high- and low-temperature performance; Pours at temperatures as low as -53 degree Fahrenheit and protects at oil temperatures as high as 400 degree Fahrenheit
- Improved protection against sludge and harmful deposits; Excellent fuel economy benefits
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.