Fuel Heater May Overheat and Cause Fire – 2017-2021 IC Bus CE School Buses

April 17, 2020 NHTSA CAMPAIGN NUMBER: 20V220000

Fuel Heater May Overheat and Cause Fire

A fire increases the risk of injury. An engine stall can increase the risk of a crash.

 

NHTSA Campaign Number: 20V220

Manufacturer NavistareBay logo, Inc.

Components FUEL SYSTEM, DIESEL

Potential Number of Units Affected 23,299

 

Summary

NavistareBay logo, Inc. (NavistareBay logo) is recalling certain 2017-2021 IC CE School Buses equipped with CumminseBay logo B6.7 diesel engines with fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.

 

Remedy

CumminseBay logo will notify the affected NavistareBay logo customers and dealers will disable the fuel heater by either installing a plug in place of the heater or otherwise rendering the fuel heater non-operable and remove the fuse supplying electrical power to the fuel heater and install a cover over the wire harness connector, free of charge. The recall began May 28, 2020. Owners may contact CumminseBay logo customer service at 1-800-286-6467.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 20E-018
CumminseBay logo Campaign #C2302

 

May 29, 2020

 

Dear CumminseBay logo Customer:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

CumminseBay logo Inc. has decided that a defect which relates to motor vehicle safety exists in certain B6.7 diesel engines that were manufactured between December 16, 2015 and March 24, 2020 and equipped with fuel module option FS90301 or FS90453.

This notice applies to your engine(s) listed on the enclosed Engine/Vehicle list.

If your engine was manufactured between December 16, 2015 and February 25, 2019, you received a similar notice regarding NHTSA Recall No. 19E-020 (CumminseBay logo Safety Campaign #C2127) pertaining to your engine(s).  This recall notice supersedes the prior recall notice; you must have the remedy described in this recall performed on your engine, even if your engine was remedied under the prior recall.

If your engine was manufactured between February 26, 2019 and November 5, 2019, your engine may have had repairs done according to CumminseBay logo Campaign #C2128 or ATC2278.  This recall notice supersedes actions under those field actions; you must have the remedy described in this recall performed on your engine, even if your engine was remedied under those actions.

If your engine was manufactured between November 6, 2019 and March 24, 2020, this is a new action.

 

WHY IS A RECALL BEING CONDUCTED?

Fuel module options FS90301 and FS90453 contain an electric fuel heater.  Internal electrical heating within the fuel heater may create sufficient heat inside the fuel heater to cause plastic in the fuel heater to melt and potentially catch fire.  It may also cause an engine stall.  A fire, if undetected and uncontained, presents an increased risk of personal injury.  An unexpected engine stall may increase the risk of a crash.  If this condition exists, melting of the fuel heater or fuel seepage from around the fuel heater may be visible during a service event, smoke may precede or accompany a fire, or the engine may become increasingly difficult to start.

 

WHAT ARE WE DOING ABOUT THE PROBLEM?

CumminseBay logo has released field Safety Campaign #C2302 “B6.7 Engine-Mounted Fuel Heater Safety Campaign” to correct this condition.  This campaign is currently available at CumminseBay logo Distributors and CumminseBay logo-authorized Warranty Dealers.  The remedy will consist of the following: (1) disabling the fuel heater by either installing a plug in place of the fuel heater or otherwise rendering the fuel heater inoperable and (2) removing the fuse supplying electrical power to the fuel heater and installing a cover over the wire harness connector.  The repair will be completed free of charge (parts and labor) and most applications will require approximately 30 minutes to complete.

This safety recall addresses the potential safety defect for your engine.  However, this repair will disable the fuel heater.  CumminseBay logo is currently working to determine an appropriate cold weather starting aid for customers that require it.  CumminseBay logo Distributors and Dealers will be notified when a separate field action is available.

 

WHAT SHOULD YOU DO?

Contact the nearest CumminseBay logo Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine.  The distributor or dealer will work with you to schedule the best date to complete this repair.

In the meantime, to mitigate the safety risk, CumminseBay logo advises you to remove the fuel heater fuse as shown in Figures 1, 2 or 3 below (based on the vehicle).

Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days.  Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.

If you previously paid to have this recall performed on your vehicle, you may be eligible for reimbursement.  Please contact CumminseBay logo Care at the number below for more information.

 

WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?

If you have questions or concerns about this recall, please contact your local CumminseBay logo Distributor or authorized warranty dealer.  You may also contact CumminseBay logo Care at 1-800CUMMINS (1-800-286-6467) or visit our website at care.cummins.com.

If you have a complaint relative to this recall, you may report it to the following:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590

 

You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.

If you have not registered your CumminseBay logo product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo.

If you are no longer the owner of the engine or vehicle listed in the table, please forward this notice to the new owner or provide the new owner’s contact information to CumminseBay logo at cumminseBay logo.campaign.administration@cumminseBay logo.com so that we can notify them of this recall.

CumminseBay logo is taking this action in the interest of safety and satisfaction with our products.  We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,

Campaign Administrator CumminseBay logo Inc.

 

Navistar® CE Bus and 1300 FBC Fuse Removal Instructions (Reference Figure 1 below)

  1. Disconnect vehicle battery.
  2. Locate red 50 Amp or green 30 Amp Maxi Fuse on under hood fuse panel.
  3. Remove fuse cap and discard red or green Maxi Fuse.
  4. Reinstall fuse cap. Do not replace fuse.
  5. Reconnect vehicle battery.

 

Navistar® MV, HV and TC Commercial Bus (some DuraStar (4300)/WorkStar (7300) Fuse Removal Instructions (Reference Figure 2 below)

  1. Disconnect vehicle battery.
  2. Remove 30 or 40 amp fuse located at 2C cavity.
  3. Reconnect vehicle battery.

 

 

Navistar® DuraStar (4300) / WorkStar (7300) / HC Commercial Bus Fuse Removal Instructions (Reference Figure 3 below)

  1. Disconnect vehicle battery.
  2. Remove Power Distribution Module (PDM) cover, located under the hood on the driver side of the vehicle.
  3. Remove fuse located at cavity 2C.
  4. Reconnect vehicle battery.

 

CumminseBay logo Inc.
Box 3005
Columbus, IN 47202-3005 USA
Mail Code: 40911 Phone: 1 800 CUMMINSeBay logo care.cummins.com

 


  • 02/04/2020 CumminseBay logo receives the first field report of a melted fuel heater on an engine that had a remedy completed under NHTSA Recall 19E-040.
  • 02/05/2020 thru 02/07/2020 CumminseBay logo sent an engineering team to the site of the reported melted fuel heater to investigate the failure. The team confirmed that the remedy had been properly performed. During this investigation, CumminseBay logo became aware of two additional reports of melted fuel heaters.
  • 02/07/2020 NavistareBay logo was informed of three failures that happened in New York.
  • 02/08/2020 thru 02/25/2020 CumminseBay logo investigated the issue, including completing teardown analysis of the returned fuel heaters. During this time, CumminseBay logo received a total of five melted heaters returned from the field.
  • 02/26/2020 CumminseBay logo conducted a Product Safety Hazard Analysis and concluded that there was insufficient information to determine that the fuel heaters contained a safety defect. The recommendation was to continue to investigate the issue.
  • 02/26/2020 thru 03/10/2020 CumminseBay logo continued the investigation, including analysis of four additional melted fuel heaters returned to CumminseBay logo and conducting tests to understand the cause and the potential scope of the issue.
  • 03/11/2020 CumminseBay logo revisited the Product Safety Hazard Analysis with the additional information from the investigation.
  • 03/24/2020 Based upon the data collected and evaluation of the issue, CumminseBay logo decided to conduct a safety recall to address this condition.
  • 03/25/2020 CumminseBay logo reviews their investigation results indicating several reports of melted fuel heaters with NavistareBay logo.
  • 03/31/2020 CumminseBay logo informed NavistareBay logo that a 573 defect report was filed with NHTSA
  • 04/07/2020 NavistareBay logo meets with CumminseBay logo to review their root cause analysis.  NavistareBay logo finalizes the suspect vehicle population based on the engine build ranges stated above.
  • 04/09/2020 NavistareBay logo declares this a safety issue. The safety recall will be managed by CumminseBay logo under NHTSA number 20E-018.

5 Affected Products

Vehicle

MAKEMODELYEAR
IC BUSCE2017-2021

 


5 Associated Documents

Miscellaneous Document- Chronology

RMISC-20V220-9367.pdf 17.207KB

 


Recall Acknowledgement

RCAK-20V220-4203.pdf 244.586KB

 


Defect Notice 573 Report

RCLRPT-20V220-3442.PDF 214.796KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V220-2341.pdf 336.34KB

 


Recall 573 Report- Amendment 1

RCLRPT-20V220-9524.PDF 214.928KB

 


Latest Recalls Documents

 


http://oemdtc.com/2890

19E-040


http://oemdtc.com/4199

20E-018


 

Bestseller No. 1
24V Diesel Water Heater, Hydronic Coolant Heater, Liquid Fuel Heater
  • Powerful Heating Power: the 16 kW diesel car heater effectively heats the engine to ensure a smooth start, especially in cold weather conditions, reduces the wear of the engine and extends its service life.
  • Diesel Fuel Compatibility: This hydronic heater is designed to use diesel fuel as an energy source. Diesel is a commonly available fuel and is more efficient for heating applications. The heater uses a fuel pump to pull diesel out of the vehicle's fuel tank, ensuring a continuous supply of the heater.
  • 24V Power Compatibility: The diesel water heater is compatible with 24V and 12V electrical systems and provides flexibility for different types of diesel trucks. This allows the car heater to be easily installed in a variety of vehicle models and configurations.
  • Preheating Function: One of the main purposes of our liquid fuel heater is to preheat the engine before starting the vehicle. This helps warm up engine oil, coolant and other important components, reduces engine wear, prevents cold start damage and improves fuel efficiency.
  • Easy to Operate: Just press the heater switch lightly, wait patiently for 10-15 minutes, the water temperature can be heated to 80 degrees, the car is good and the cab has warm air.
Bestseller No. 2
Extra Capacity Fuel Tank Chinese diesel heater Standpipe kit - All-Metal Rust-Proof Cap with 36” Tubing, Tygon Connectors, Hose Clamps, and Fuel Filter - Extend Runtime 5x
  • MAXIMIZE DIESEL HEATER RUNTIME – FUEL LINE KIT FOR 5-GALLON TANKS: Upgrade your diesel heater setup with this extra capacity standpipe kit, designed to fit standard 5-gallon diesel fuel tanks. Say goodbye to frequent refueling with this long-runtime diesel heater accessory perfect for off-grid cabins, winter camping, overlanding, and RV living. Chinese diesel heater Standpipe kit diesel heater fuel line kit.
  • ALL-METAL, RUST-PROOF DIESEL HEATER STANDPIPE – BUILT FOR HARSH WEATHER: Made with a zinc-coated metal standpipe and an EZ-Pour cap, this durable diesel fuel tank standpipe resists rust and corrosion, making it ideal for cold climates and outdoor environments. A must-have for winter heater maintenance kits and outdoor diesel heater setups diesel heater fuel tank standpipe.
  • HIGH-PERFORMANCE FUEL TUBING KIT – 36” POLYETHYLENE + TYGON CONNECTORS: Get a smooth, reliable fuel flow with premium polyethylene tubing and Tygon fuel-grade connectors. This diesel heater fuel line kit ensures steady performance for Chinese diesel heaters, portable diesel heaters, and garage heaters diesel heater fuel line upgrade kit.
  • EASY INSTALLATION – HOSE CLAMPS & DIESEL FUEL FILTER INCLUDED: Includes six stainless steel hose clamps for a secure, leak-proof fit, plus an in-line fuel filter to block contaminants and protect your diesel heater pump. Ideal for DIY diesel heater upgrades and fuel tank conversion kits diesel heater stand pipe kit.
  • UNIVERSAL USE – DIESEL HEATER ACCESSORY FOR RV, TENT, GARAGE & OFF-GRID USE: Whether you’re heating an RV, workshop, ice fishing tent, or cabin, this diesel heater tank adapter kit supports uninterrupted heating. Allows quick tank changes without shutting down your heater - great for survival kits, preppers, and winter overlanders diesel heater fuel line kit.
Bestseller No. 3
VEVOR 8KW Diesel Heater, Parking Heater with Automatic Altitude Adjustment, Max 18045 ft, Bluetooth App Control Diesel Air Heater, Remote Control and LCD, for Car SUV Trailer Camper Van Boat Garage
383 Reviews
VEVOR 8KW Diesel Heater, Parking Heater with Automatic Altitude Adjustment, Max 18045 ft, Bluetooth App Control Diesel Air Heater, Remote Control and LCD, for Car SUV Trailer Camper Van Boat Garage
  • Efficient Heating: Heater Power: 8 KW; Rated Voltage: 12V. Applicable Range: 215-269 ft²/20-25 m². Our diesel air heater adopts a sandblasting aluminum heat exchanger for rapid heat production and transfer, ensuring a comfortable temperature inside your vehicle or boat within 10 minutes.
  • Phone=Controller: Our latest upgraded diesel heater features enhanced Bluetooth control for even greater convenience. Simply download the app and gain control to preheat your heater from a distance of up to 98 ft/30 m. And it also comes with a 32 ft/10 m remote control and LCD; choose your convenient control method. The temperature can be adjusted from 46 °F-96.8 °F/8 °C-36 °C, catering to your specific needs.
  • Automatic Altitude Compensation: Our diesel air heater is equipped with automatic altitude compensation, making it suitable for altitudes up to 18,045 feet/5,500 meters. It adjusts its operation based on the altitude, so you don't have to manually control it. Enjoy seamless heating performance even in high-altitude environments.
  • Low Energy Consumption & High Output: Save on fuel costs with our diesel heater's precision low-noise fuel pump, consuming only 1 gallon per night and reducing fuel consumption to a range of 0.16-0.62 L/h. With a 10 L/2.6gal large capacity fuel tank, the diesel air heater can provide continuous heat for up to 16 hours, maximizing fuel efficiency and minimizing energy waste.
  • Secure and Reliable: Our diesel air heater features a high safety system, allowing for worry-free usage in various environments such as cars, RVs, and ships. It provides constant temperature control, timing function, voice broadcasting, preheating, and overheating protection at ≥270 °C/518 °F, ensuring a safe and comfortable experience throughout the night.
Bestseller No. 4
FASS (HK-1001) HD/Titanium/Platinum Series Electric Heater Kit
  • Dispenses heat through FASS System and Filters
  • Aids in Cold Weather Starts
  • Prevents Fuel Gelling
  • Automatic On/Off Heater
  • Fits Titanium Series System
Bestseller No. 5
NIULPFZTK 1320399A 35320A Diesel Heater Fuel Tank Standpipe, 650mm x 5mm, Stainless Steel, Automotive Fuel Hoses, White, 1 Count
  • 【Replace Part Number】 Replace Heater Fuel Tank Standpipe 650mm x 5mm: 1320399A 35320A, its dimension is 650mm long, suitable for connector hose with 5mm internal.
  • 【Fitment】:compatible with WebastoeBay logo HL18/24/32/ HL90 DBW46, compatible with WebastoeBay logo Top 18/24/32, compatible with WebastoeBay logo Top 2000/2000S/2000ST/2000STC, compatible with WebastoeBay logo Top 3500/5000/3500ST/5000ST, compatible with WebastoeBay logo Top EVO 3900/5500/40/55, compatible with WebastoeBay logo Thermo Top C/E, compatible with WebastoeBay logo Thermo 50/90/90ST.
  • 【Enhanced Durability】The heater stand pipe set is made of premium materials to withstand the rigors of heating systems. Resistant to heat, corrosion, and wear, ensuring a long lifespan and reducing the need for frequent replacements.
  • 【Features】Ability to quickly and safely install the fuel pickup without removing the fuel tank or interrupting vehicle fuel lines. Suitable for tank or tank sender unit installation.
  • 【Package Includes】1 x fuel tank stand pipe, 1 x fuel line, 1 x filter element, 2 x connection hoses, 5 x hose clips, providing all necessary compnts for a straightforward installation.

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...