Pressure Relief Devices May Not Vent – EMER Pressure Relief Device – Agility

โ€œThis site contains affiliate links for which OEMDTC may be compensatedโ€

April 8, 2020 NHTSA CAMPAIGN NUMBER: 20E019000

Pressure Relief Devices May Not Vent

If the fuel system ruptures from being exposed to heat, there would be an increased the risk of injury.

 

NHTSA Campaign Number: 20E019

Manufacturer Agility Fuel Solutions

Components FUEL SYSTEM, OTHER

Potential Number of Units Affected 2,015

 

Summary

Agility Fuel Systems (Agility) is recalling certain CNG Pressure Relief Devices, CNG Valves and CNG Fuel Systems that include an EMER pressure relief device. The thermally activated pressure relief devices (PRDs) installed on CNG fuel systems may not vent the system when exposed to heat, potentially resulting in the system rupturing.

 

Remedy

Agility will work with OEM’s and distributors to notify customers, and replace the PRDs, free of charge. The recall began on April 28, 2020. Owners may contact Agility customer service at 1-949-267-7745.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


* * * IMPORTANT SAFETY RECALL * * *

NHTSA Recall 20E019

This notice applies to your vehicle(s):  See attached vehicle list.

Your Vehicle Identification Number(s) (VIN):  See attached VIN list.

This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act (NHTSA).  Agility Fuel Solutions LLC (Agility) has determined that a defect which relates to motor vehicle safety exists in Agility-supplied compressed natural gas (CNG) fuel systems equipped with certain EMER S.p.A. (EMER) pressure relief devices (PRDs) (EMER Part Numbers PRD2302T-004, PRD2322T-001, PRD2322T-004, PRD2102T, PRD212 and PRD 210OR) and EMER valves that contain EMER PRDs (EMER Part Numbers MARK147007 and MARK147-008).  The CNG fuel system installed on your vehicle(s) (identified in the attachment) may be affected.  Agility is conducting a safety recall to address this condition. This recall also includes any of the above-listed PRDs and valves that you may have purchased as service and/or replacement parts.

 

What is the issue?

The EMER-supplied thermally activated PRDs and valves identified above and installed on the subject CNG fuel systems may not vent the fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What will Agility do?

Agility and its authorized representatives will inspect your vehicle to determine whether it is equipped with one of the defective PRDs and/or valves.  If so, we will replace the PRDs and/or valves free of charge (parts and labor) with PRDs and/or valves that meet applicable specifications. Replacement parts are currently available. Installation of the replacement PRDs and/or valves is expected to take approximately one hour.  However, because the CNG fuel system needs to be defueled in order to install the replacement PRDs and/or valves, each vehicle may need to be available for a longer period of time.  We will do our best to minimize the time that the vehicle needs to be available.

If you purchased the PRDs and/or valves listed above as service or replacement parts, please contact Agility to arrange for return of any new (uninstalled) parts remaining in your inventory for credit. For parts that have been installed on vehicles, Agility will inspect and repair the vehicles in the same manner as above.

 

What should you do?

Please call Agility at your earliest opportunity at (949) 267-7745 to schedule a service appointment.  Please mention Recall No. 20E019 and the VIN of the vehicle as shown in the attached.  If you no longer own this vehicle and have an address for the new owner, please forward a copy of this letter to the new owner and provide Agility with updated contact information at (949) 267-7745.

Note:  Federal law prohibits the delivery of affected vehicles or equipment under a sale or lease until the defect has been remedied.  Federal law also requires that any vehicle lessor receiving this recall notice forward a copy of the notice to the lessee with 10 days.

 

Can we assist further?

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.  Owners that are an unable to get their vehicles repaired in a reasonable time may write to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590 or call the free Vehicle Safety Hotline at 1-888-327-4236 (TYY: 1-900-424-9153) or go to www.safercar.gov (reference NHTSA Safety Recall No. 20E019).

*           *           *

We apologize for the inconvenience, but we are taking this step in the interest of our customersโ€™ safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.

Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC

 

Enclosures:     List of Vehicles and VINs

 


* * * IMPORTANT SAFETY RECALL * * *

NHTSA Recall 20E019

This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act (NHTSA).  Agility Fuel Solutions LLC (Agility) has determined that a defect which relates to motor vehicle safety exists in certain pressure relief devices (PRDs) manufactured by EMER S.p.A. (EMER) (EMER PRD Part Numbers PRD2302T-004, PRD2322T001, PRD2322T-004, PRD2102T, PRD212, PRD 210OR) and EMER valves that contain these PRDs (EMER Valve Part Numbers MARK147-007 and MARK147-008).  Agility is conducting a safety recall to address this condition.  Our records indicate that you may have purchased some of the above-listed PRDs and/or valves as service and/or replacement parts.

 

What is the issue?

The EMER-supplied thermally activated PRDs and valves identified above may not vent a fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What will Agility do?

If you the purchased PRDs and/or valves listed above, Agility will send you a free replacement PRD or valve that meets applicable specifications.  Replacement parts are currently available. For PRDs or valves that have been installed on vehicles, Agility will provide work instructions describing appropriate replacement procedures.

 

What should you do?

Please call Agility at your earliest opportunity at (949) 267-7745 to request replacement PRDs and/or valves.  If you no longer own the vehicle(s) on which one of the recalled PRDs or valves was installed and have an address for the new owner, please forward a copy of this letter to the new owner and provide Agility with updated contact information at (949) 267-7745.

Note:  Federal law prohibits the delivery of new motor vehicles or motor vehicle equipment under a sale or lease until the defect has been remedied.  Federal law also requires that any vehicle lessor receiving this recall notice forward a copy of the notice to the lessee with 10 days.

 

Can we assist further?

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.  Owners that are an unable to obtain the recall remedy within a reasonable time may write to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590 or call the free Vehicle Safety Hotline at 1-888-327-4236 (TYY: 1-900-424-9153) or go to www.safercar.gov (reference NHTSA Safety Recall No. 20E019).

*           *           *

We apologize for the inconvenience, but we are taking this step in the interest of your safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.

Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC


* * * IMPORTANT SAFETY RECALL NOTICE* * *

NHTSA Recall 20E019

 

Dear Mr.

We are writing to inform you that Agility Fuel Solutions LLC (Agility) has determined that a defect relating to motor vehicle safety exists with respect to certain pressure relief devices (PRDs) manufactured by EMER S.p.A. (EMER) (EMER Part Numbers PRD2302T-004, PRD2322T-001, PRD2322T-004, PRD2102T, PRD212, PRD 210OR) and EMER valves that contain these PRDs (EMER Valve Part Numbers MARK147-007 and MARK147-008), which were supplied to you by Agility.  Agility is conducting a safety recall to address this condition.  Our records indicate that you may have purchased some of the above-listed PRDs and/or valves as service and/or replacement parts.

A copy of Agilityโ€™s amended Part 573 Defect Notification is enclosed for your convenience. This notification was initially submitted to the National Highway Traffic Safety Administration (NHTSA) on April 8, 2020 and amended on April 23, 2020.

 

What is the issue? 

The EMER-supplied thermally activated PRDs and valves identified above may not vent a fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What should you do? 

  1. Recalled products in inventory. For any new PRDs and/or valves listed above that remain in your inventory, please contact Agility to arrange for return of the product for credit or free replacement.
  2. Recalled product in the hands of your customers and owners. It is critical that downstream resellers and end users be advised of this recall.ย  Accordingly, please do the following:

Reselling Customers:  You must forward copies of this letter within five (5) business days of receipt to each of your reselling customers who may have purchased the recalled products from you.  They should contact Agility for a refund or free replacement.

End Users:  Please check your records to identify any end-user purchasers of the recalled products and forward the enclosed end-user (owner) letter to them as soon as possible.  Alternatively, you can provide their contact information to Agility at support@agilityfs.com so that we can notify them of this recall and provide return instructions.

Federal law prohibits the delivery of affected new vehicles or equipment under a sale or lease until the defect has been remedied.

 

Can we assist further? 

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.

We apologize for the inconvenience, but we are taking this step in the interest of our customersโ€™ safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.  Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC

Enclosures:
Copy of 573 Defect Notification (Amendment 1)
End User Letter


LETTER TO INTERMEDIATE- AND FINAL-STAGE MANUFACTURERS

* * * IMPORTANT SAFETY RECALL NOTICE* * *

NHTSA Recall 20E019

 

We are writing to inform you that Agility Fuel Solutions LLC (Agility) has determined that a defect relating to motor vehicle safety exists in Agility-supplied compressed natural gas (CNG) fuel systems equipped with certain EMER S.p.A. (EMER) pressure relief devices (PRDs) (EMER Part Numbers PRD2302T-004, PRD2322T-001, PRD2322T-004, PRD2102T, PRD212 and PRD 210OR) and EMER valves that contain EMER PRDs (EMER Part Numbers MARK147-007 and MARK147-008).  Agility is conducting a safety recall to address this condition.  Our records indicate that some of the affected CNG fuel systems were shipped to you. This recall also includes any of the above-listed PRDs and valves that you may have purchased as service and/or replacement parts.

A copy of Agilityโ€™s Part 573 Defect Notification is enclosed. This notification was submitted to the National Highway Traffic Safety Administration (NHTSA) on April 8, 2020.  An amendment was submitted to NHTSA on April 23, 2020.

 

What is the issue? 

The EMER-supplied thermally activated PRDs and valves identified above and installed on the subject CNG fuel systems may not vent the fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What should you do? 

For affected fuel systems that remain in your inventory, please call Agility to schedule a repair. For any PRDs and/or valves listed above that you purchased as service or replacement parts, please contact Agility to arrange for return of any new (uninstalled) parts remaining in your inventory for credit.

For fuel systems installed in vehicles that have left your control (including those in which you installed one of the suspect PRDs or valves listed above), we encourage you to make a safety defect determination in accordance with 49 USC 30118 et seq. and, as appropriate, to submit a Defect Notification to NHTSA in accordance with 49 CFR Part 573. Agility and its authorized representatives will work with you to arrange owner notifications in accordance with 49 CFR Part 577 and replacement of the potentially defective PRDs on affected vehicles.  The defective PRDs will be replaced with PRDs that meet applicable specifications. Installation of the replacement PRDs is expected to take approximately one hour.  However, because the CNG fuel system needs to be defueled in order to install the replacement PRDs, each vehicle may need to be available for a longer period of time.  We will do our best to minimize the time that the vehicle needs to be available.

Agility aims to have this recall service completed on all affected vehicles as soon as possible and needs your assistance in locating them.  Therefore, please provide a copy of this letter and the attached owner letter to your affected customers and send the name, address and VIN information for the affected vehicle(s) to Agility Fuel Solutions at 3335 Susan St. Ste 100, Costa Mesa, CA 92868; Attention: Kurt Nielsen or electronically to support@agilityfs.com.  Agility will follow up with owners to arrange the repair.  If you were an intermediate-stage manufacturer and do not have VIN or owner contact information, we request that you obtain that information from your customers and forward it to us to follow up.

Federal law prohibits the delivery of affected vehicles or equipment under a sale or lease until the defect has been remedied.

 

Can we assist further? 

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.

We apologize for the inconvenience, but we are taking this step in the interest of our customersโ€™ safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.  Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC

Enclosures:
Copy of 573 Defect Notification (Amendment 1)
Owner Notification Letter


2 Affected Products

Equipments

BRANDPART NO.PRODUCTION DATES
AGILITY FUEL SYSTEMSCNG FUEL SYSTEM
AGILITY FUEL SYSTEMSCNG PRESSURE RELIEF DEVIC

 


22 Associated Documents

Remedy Instructions and TSB

RCRIT-20E019-1538.pdf 1718.247KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.64 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-2015.pdf 637.781KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [622.83 KB]

 


Remedy Instructions and TSB

RCRIT-20E019-4793.pdf 1743.947KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.66 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-3666.pdf 1061.11KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.01 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1981.pdf 1136.086KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.08 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1325.pdf 2283.888KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.18 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1440.pdf 1767.966KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.69 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1681.pdf 2298.288KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.19 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-3057.pdf 1135.574KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.08 MB]

 


Manufacturer Notices(to Dealers,etc) – Customer Letter – OEMs

RCMN-20E019-0248.pdf 160.008KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [156.26 KB]

 


Manufacturer Notices(to Dealers,etc) – Customer Letter – Loose Parts

RCMN-20E019-7523.pdf 154.776KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [151.15 KB]

 


ISSUED Owner Notification Letter(Part 577) – End User Letter – Parts

RCONL-20E019-6823.pdf 153.545KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [149.95 KB]

 


ISSUED Owner Notification Letter(Part 577) – End User Letter

RCONL-20E019-3830.pdf 158.277KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [154.57 KB]

 


Defect Notice 573 Report

RCLRPT-20E019-9721.PDF 225.477KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [220.19 KB]

 


Recall 573 Report – Amendment 1

RCLRPT-20E019-5748.PDF 234.194KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [228.71 KB]

 


Recall Acknowledgement

RCAK-20E019-4849.pdf 245.115KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download

 


Remedy Instructions and TSB

RCRIT-20E019-4852.pdf 2601.497KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.48 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1731.pdf 1308.664KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.25 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1388.pdf 2654.504KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.53 MB]

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20E019-7331.PDF 211.133KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20E019-7430.PDF 211.229KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20E019-2795.PDF 211.323KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Latest Recalls Documents

 


 

โ€œThis site contains affiliate links for which OEMDTC may be compensatedโ€
Bestseller No. 1
TEENGSE Natural Gas Conversion Kit Regulator with Hose, 1/2" Natural Gas and Liquefied Interchange Pressure Regulator Replacement for 3030 CNG 4.0" & LP 10" for Kitchen-Aid 710-0003 Gas Grill
  • ใ€TWO MODESใ€‘: The 1/2 PSI gas regulator have both propane and natural gas mode. The factory setting of the nature pressure regulator is propane mode, if you need natural gas mode, please open the knob on the cover to convert the screw to natural gas mode, please refer to our picture for details.
  • ใ€SPECIFICATIONSใ€‘:The therad on the Regulator is 1/2" Male Thread and the end of house is 3/8" Female Flare. When using LPG regulating valve: LP inlet pressure is 2.74Kpa(11 "w.c), outlet pressure is 2.45~2.55 kpa(10 "w.c), gas flow rate is 30L/min; When using natural gas regulating valve: LP inlet pressure is 1.74Kpa(7 "w.c). Outlet pressure is 0.95~1.05 kpa(4 "w.c), flow rate is 50L/min.
  • ใ€FUNCTIONSใ€‘: This 102-B model rugulator converts your equipment that uses propane to one that uses natural gas. You can use it to replace the Kitchen Aid Natural Gas Conversion Kit 710-0003.Functions the same as the original part contents.
  • ใ€CONVERSION MODELใ€‘: This natural gas pressure regulator can converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787, 720-0787D, 720-0819, 720-0819A, 720-0891B, 720-0826, 720-0891R, 720-0893.
  • ใ€WARM TIPSใ€‘: The natural gas conversion Kit is rated to operate from -32ยฐF to 225ยฐF (0ยฐC to 107ยฐC) Do not install the regulator too close to heating equipment or use it in very cold environments. Heat and cold will change the resistance of the spring inside the regulator. The gas pressure regulator will not shut off the gas flow.
Bestseller No. 2
Fuel Injection Pressure Sensor Fuel Rail Pressure Regulator Sensor for 2004 Ford F-150 Heritage 5.4L 330Cu. in. V8 CNG SOHC Naturally Aspirated New
  • 100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • Manufacturer Part Number:FPS7, 3R3Z-9F972-AA, 3R3Z-9F972-AB, 3R3Z9F972AA, FPS-7๏ผ› 3R3Z9F972AB, 3R3E-9F972-AA, F8CZ-9F972-BD, F8CZ-9F972-BC๏ผ› F8CZ-9F972-BE, 3R3E9F972AA, F8CZ9F972BD, F8CZ9F972BC๏ผ›XW4Z-9F972-BA, XW4Z9F972BA, 3R3Z-9G756-AC, F8CZ9F972BE๏ผ› 3R3Z9G756AC, F8CF9F972BG, F8CF9F972BE, F8CF9F972BH๏ผ› F8CF9F972BF, F8CF-9F972-BE, F8CF-9F972-BH๏ผ›FPS17, FPS-507, F8CF-9F972-BF, F8CF-9F972-BG๏ผ›PR244, SU10479, SU13804, 5G1142, 5S9017, FPS507, FPS-17.
  • Fits For FordeBay LincolneBay MercuryeBay Vehicles with 2.0 2.3 3.0 3.8 3.9 4.6 5.4 Liter V6 V8 L4 Engine : For 2004 2005 FordeBay Explorer; For 2003 2004 FordeBay Crown Victoria; For 2004 2005 2006 2007 2008 FordeBay F150; For 2000 2001 2002 2003 2004 FordeBay Focus; For 2005 2006 FordeBay E150 Club Wagon E250 GT; For 2002 2003 2004 2005 2006 2007 FordeBay Taurus Thunderbird.
  • Fits For 1999 2000 2001 2002 2003 2004 FordeBay MustangeBay; For 2003 2004 2005 2006 LincolneBay Town Car Aviator; For 1998 1999 2000 2001 2002 LincolneBay ContinentaleBay; For 2000 2001 2002 2003 2004 2005 2006 LincolneBay LS; For 1998 1999 MercuryeBay Tracer; For 2002 2003 2004 MercuryeBay Sable Marauder Mountaineer Grand Marquis
  • Package Include:1x Fuel Pressure Sensor
Bestseller No. 3
Fuel Injection Pressure Regulator Sensor for 2004 Ford F-150 Heritage 5.4L 330Cu. in. V8 CNG SOHC Naturally Aspirated
  • ใ€Brand Newใ€‘100% Brand New and All parts are tested and quality controlled prior to shipment
  • Fitment: Fits For FordeBay LincolneBay MercuryeBay Vehicles with 2.0 2.3 3.0 3.8 3.9 4.6 5.4 Liter V6 V8 L4 Engine : For 2004 2005 FordeBay Explorer; For 2003 2004 FordeBay Crown Victoria; For 2004 2005 2006 2007 2008 FordeBay F150; For 2000 2001 2002 2003 2004 FordeBay Focus; For 2005 2006 FordeBay E150 Club Wagon E250 GT; For 2002 2003 2004 2005 2006 2007 FordeBay Taurus Thunderbird.
  • Fitment: Fits For 1999 2000 2001 2002 2003 2004 FordeBay MustangeBay; For 2003 2004 2005 2006 LincolneBay Town Car Aviator; For 1998 1999 2000 2001 2002 LincolneBay ContinentaleBay; For 2000 2001 2002 2003 2004 2005 2006 LincolneBay LS; For 1998 1999 MercuryeBay Tracer; For 2002 2003 2004 MercuryeBay Sable Marauder Mountaineer Grand Marquis
  • Manufacturer Part Number:FPS7, 3R3Z-9F972-AA, 3R3Z-9F972-AB, 3R3Z9F972AA, FPS-7๏ผ› 3R3Z9F972AB, 3R3E-9F972-AA, F8CZ-9F972-BD, F8CZ-9F972-BC๏ผ› F8CZ-9F972-BE, 3R3E9F972AA, F8CZ9F972BD, F8CZ9F972BC๏ผ›XW4Z-9F972-BA, XW4Z9F972BA, 3R3Z-9G756-AC, F8CZ9F972BE๏ผ› 3R3Z9G756AC, F8CF9F972BG, F8CF9F972BE, F8CF9F972BH๏ผ› F8CF9F972BF, F8CF-9F972-BE, F8CF-9F972-BH๏ผ›FPS17, FPS-507, F8CF-9F972-BF, F8CF-9F972-BG๏ผ›PR244, SU10479, SU13804, 5G1142, 5S9017, FPS507, FPS-17.
  • Package Include:1x Fuel Pressure Sensor
Bestseller No. 4
RVGUARD RV Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gauge and Inlet Screen Filter for RV Camper Travel Trailer
  • Function: Prevent water pipes from being damaged due to high pressure, suitable for camperseBay, trailers, and RV plumbing systems.
  • Safety: Class C46500 lead-free brass treated by hot casting process technology. Each regulator is tested to contain less than 0.13% lead, well under the NSF/ANSI 372 lead-free requirements of 0.25%, giving you a safe and healthy life.
  • Compatible: Designed with 3/4" garden hose thread. It is compatible with all American water sources, easy to use. RVGUARD regulator inlet screen helps to filter out impurities in water.
  • Adjustable: Factory Setting: 45 PSI, water pressure setting can be easily adjusted to whatever water pressure you need by turning the screwdriver. Turn clockwise to increase pressure, and turn counterclockwise to decrease pressure.
  • Gauge Display: The water pressure can be seen on the gauge, which is necessary for RVs, camperseBay, and travel trailers.
SaleBestseller No. 5
Camco Brass Marine/RV Water Pressure Regulator โ€“ Protects RV Kitchen Small Appliances, Plumbing & Hoses โ€“ Reduces RV Water Pressure to Safe & Consistent 40-50 PSI โ€“ Drinking Water Safe (40055)
  • Protects RV/Marine Plumbing: Keep your RV/marine plumbing safe with this brass Camco water pressure regulator. Safeguard against high-pressure city water to protect your hoses & plumbing from potential damage.
  • Automatic Pipe Burst Protection: Ensure your pipes are safe using the built-in PSI Guard, preset at 40-50 PSI for automatic burst protection. (Maximum incoming pressure is 125 PSI.)
  • Safe for Drinking Water: Camcoโ€™s pressure regulator for RV water Hoses is drinking water safe. Itโ€™s a must-have campereBay tool for setups that require outstanding water quality.
  • Certified Lead-Free: This water regulator For RV camperseBay is crafted from high-quality brass material. It is CSA lead-free content certified to NSF/ANSI 372 & compliant with all federal & state-level lead-free laws.
  • Patented Technology: Expertly crafted, this Patented RV Accessory has undergone extensive testing and quality control to meet the highest standards.
Bestseller No. 6
SNS Low Pressure Air Regulator Air Compressor Pressure Regulator With Bracket and Gauge Female Thread 1/4 NPT Adjustable AR2000-N02 (0-40 PSI)
  • Thread: 1/4 NPT
  • Rated Flow: 19.4 SCFM(550 L/min)
  • Temperature Range: 5~60โ„ƒ(41-140โ„‰), Pressure Range: 7~42 psi
  • Aluminum Alloy Material
  • When regulating pressure, pull up the rotary knob and rotate clockwise to increase the pressure and rotate anticlockwise to decrease the pressure.
SaleBestseller No. 7
RVGUARD RV Water Pressure Regulator Valve With An Adjustable Knob, NO Tool Required, Brass Lead-Free Water Pressure Reducer with Gauge and Inlet Screen Filter for RV Camper Travel Trailer
  • Adjustable Knob: RVGUARD new design water pressure regulator with an adjustable knob. Just use your hand to adjust the pressure, no tool required, easy to operate. Turn clockwise to increase pressure, and turn counterclockwise to decrease pressure. Factory Setting: 45 PSI.
  • Function: Prevent water pipes from being damaged due to high pressure, suitable for camperseBay, trailers, and RV plumbing systems.
  • Safety: Class C46500 lead-free brass treated by hot casting process technology. Each regulator is tested to contain less than 0.13% lead, well under the NSF/ANSI 372 lead-free requirements of 0.25%, giving you a safe and healthy life.
  • Compatible: Designed with 3/4" garden hose thread. It is compatible with all American water sources, easy to use. RVGUARD regulator inlet screen helps to filter out impurities in water.
  • Gauge Display: The water pressure can be seen on the gauge, which is necessary for RVs, camperseBay, and travel trailers.
Bestseller No. 8
Air compressor pressure regulator 1/4" mini pressure gauge, double connection pressure regulator air compressor air pump accessories 180psi 12bar (three-way valve)
  • Materials: plastic, zinc alloy and copper.Female Thread Diameter: 1/4 PT.Maximum voltage: 240V. Maximum current: 15 amps. Maximum pressure: 180 psi, 12 bar.
  • Allows precise air control for best painting results with this item.Standard air inlet and outlet are suitable for almost any type of spray paint
  • Easy to install and disassemble.With the barometer, can be set and read the data.With the valve knob, you can adjust the atmospheric pressure as needed.Can help save electric power.
  • Air compressor pressure switch is a very necessary component to install or connect air compressor or air hoseMain function of valve is to regulate stop and start pressure of air compressor.
  • Package List: 1 x pressure regulating valve, 1 x pressure gauge, 2 x connector , 1 x nipple (Double connection) ,1 x Thread Seal Tapes(1/2-394inch)
SaleBestseller No. 9
Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread
  • Maintains optimum 25 psi pressure and water flow to Drip lines and emitter devices
  • Connects to any 3/4" male pipe threaded faucet, garden hose or component
  • 20 gallon per minute flow through capacity
  • Durable, robust design provides reliable operation
  • Constructed of highly durable UV and chemical-resistant materials
SaleBestseller No. 10
LE LEMATEC Air Compressor Regulator Valve with Pressure Gauge, for Precise Control in Air/Pneumatic Tool Applications, Spray Painting, Tire Inflation and More, ยผ NPT, 0-150 PSI (AR-01)
  • Precise finishes: Achieve smooth results with our spray gun regulator with gauge, ideal for professionals.
  • Reduce waste: Minimize overspray using our HVLP air regulator, saving time and resources.
  • Easy control: Adjust air pressure with our inline air regulator, enhancing project control.
  • Smooth coating: Ensure even application with our paint sprayer regulator, perfect for all users.
  • Stable performance: Trust consistent air pressure with our paint gun air regulator.

Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...