“This site contains affiliate links for which OEMDTC may be compensated” |
July 28, 2020 NHTSA CAMPAIGN NUMBER: 20V432000
Rear Swing Arm Spare Tire Carrier Bracket May Fail
If the rear swing arm spare tire carrier bracket weld fails, the spare tire may separate from the vehicle, increasing the risk of a crash.
NHTSA Campaign Number: 20V432
Manufacturer High Altitude Trailer Co LLC
Components STRUCTURE
Potential Number of Units Affected 6
Summary
High Altitude Trailer Co, LLC (HATC) is recalling certain 2019-2020 XT50 trailers retrofitted with a black rear swing arm spare tire carrier. The weld on the retrofitted rear swing arm bracket may fail causing the rear swing arm, spare tire, and any other attached items to break away from the trailer frame.
Remedy
HATC has notified owners, and dealers will add reinforcing welds along the top seam of the swing arm bracket and trailer frame, free of charge. For customers not in the immediate region, the manufacturer will coordinate with a local welding repair shop to add the welds and reimburse the shop directly. The recall began July 28, 2020. Owners may contact HATC customer service at 1-720-391-6685. HATC’s number for this recall is 2020G27.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
NHTSA RECALL: 2020G27
<<VIN>>
<<Owner name/Dealer name>>
<<Address>>
<<CitY>>, <<ST>> <<Zip>>
7/28/2020
This notice applies to your vehicle VIN listed above.
Dear High Altitude Trailer Co Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. High Altitude Trailer Co (HAT Co) has decide that a defect, which relates to the motor vehicle safety, exists in certain 2019 / 2020 model year XT50 trailers. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
IS THE DEFECT/NONCOMPLIANCE?
The weld on the retrofitted rear swing arm bracket may fail causing the rear swing arm, spare tire, and any other attached items to break away from the trailer frame.
EVALUATION OF RICK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
The rear swing arm may break away from the trailer frame which may increase the risk of personal injury, property damage, or death.
WHAT IS HAT CO AND OUR DEALERSHIPS GOING TO DO?
HAT Co is notifying dealerships of the recall. You may have the recall corrected at the HAT Co manufacturing facility located in Sedalia, CO. HAT Co completely covers your cost for the remedy. If you live outside of the manufacturing facility’s region, you may have the work completed at an approved local repair facility.
WHAT SHOULD YOU DO?
Please contact your dealer and the manufacturing facility without delay and request a service appointment to schedule the recall remedy. The vehicle Owner is responsible for coordinating to have the work completed. Please state you have notified by High Altitude of having a recall in process for your trailer and provide the recall number. It is also helpful to the manufacturer to have a copy of this letter when you take your vehicle in for the recall remedy.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is 2.00 hours. However, the manufacturer may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.
WHAT TO DO IF YOU NO LONGER OWN THIS VEHICLE?
If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner within 10 working days after the day in which the notice is received. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate you are the current owner.
PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.
MAY HIGH ALTITUDE ASSIST YOU FURTHER?
If you have difficulties getting your vehicle repaired, please contact your High Altitude Representative listed below:
CONTACT | PHONE NUMBER |
Customer Service | 720-391-6685 |
If you are still having difficulty getting your vehicle/trailer repaired in a reasonable amount of time or without charge, you may write to the following address:
For US Owners Please Contact:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, DC 20590
Sincerely,
High Altitude Trailer Co
President
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
HIGH ALTITUDE TRAILER | XT50 | 2019-2020 |
9 Associated Documents
Recall Quarterly Report #5, 2021-3
RCLQRT-20V432-1163.PDF 211.533KB
Defect Notice 573 Report
RCLRPT-20V432-5766.PDF 213.449KB
Owner Notification Letter(Part 577)
RCONL-20V432-9064.pdf 661.051KB
Recall Acknowledgement
RCAK-20V432-6065.pdf 245.011KB
Recall Quarterly Report #4, 2021-2
RCLQRT-20V432-0681.PDF 211.423KB
Recall Quarterly Report #2, 2020-4
RCLQRT-20V432-2050.PDF 211.423KB
Recall Quarterly Report #3, 2021-1
RCLQRT-20V432-6277.PDF 211.423KB
Recall 573 Report- Amendment 2
RCLRPT-20V432-9165.PDF 213.577KB
Recall Quarterly Report #1, 2020-3
RCLQRT-20V432-5773.PDF 211.149KB
Recalls Documents
- 【150 LBS HEAVY DUTY】This spare tire bracket is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place and holds up to 150 Lbs.
- 【WIDE APPLICABILITY】Our spare tire carrier
compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern. Because of its universal compatibility, it is also suitable for boat trailers.
- 【Robust Construction】Once the screws are tightened, your spare tire mount will no longer have the risk of losing a tire. The industrial solid iron and sandblasting process gives it a durable, smooth and attractive surface so you don't have to have bumpy roads.
- 【EASY TO INSTALL】Features a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
- 【WORRY-FREE VOUCHSAFING】GADFISH Spare tire carriers comes with 18 months of support and are rigorously tested before shipment. Please feel free to contact us if you have any questions regarding Carrier
installation. We will definitely give you a satisfying solution.
- [Fitment] Trailer U-Bolt Spare Wheel Carrier
Bracket fits trailer frames up to 2" or 3" wide (up to 4" high) and fits up to 15".
- [High Quality Material] The trailer tire U-bolt bracket is made of 8.8 grade thick steel, galvanized surface, beautiful and practical, corrosion-resistant coating, no fear of bad weather, durable.
- [Easy to Install] The spare tire is mounted on the side of the trailer (to prevent damage), this spare tire holder can be easily installed to secure the tire. Just put the bolts into the throat of the trailer and tighten. The carrier
bracket is threaded for easy installation.
- [Product Use] Trailer U-Bolt Spare Tire Mount is a simple solution for hauling and placing spare trailer tires.
- [Package includes] 1 x U-bolt and 2x lug nuts.
- Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern
- Mounts on trailer tongues up to 3 inch wide and 5 inch high
- Angled and raised mount design makes this ideal for boat trailers as well
- Durable powder coat finish to resist rust and corrosion
- Zinc plated mounting hardware
- 【Material】:The wall mount spare tire carrier
is used to mount to the wall of the trailer or garage,This enclosed trailer accessories spare tire carrier
, constructed of heavy duty steel.Universal fit for most spare trailer tires.spare tire holder the special chute is United States Design Patent !
- 【Optimized Design】1.This trailer spare tire mount for utility trailer,Spare tire holder for trailerthe fixed plate was widened to 2.4 inches with the bracket more secure and not easy to loose and swing .2.The patent design of the special chute is very convenient to replace the screws of different lengths, without having to remove the fixed wall board.3.The Nylon Insert Hex Lock Nuts Truly able to can better lock the tire, prevent it from falling off.4.When installed on the wall, butterfly nuts can be used to load and unload tires more quickly
- 【Include】: Spare tire carrier
bracket for enclosed trailer,Spare tire wall mount with zinc-platted steel .one Nylon Insert Hex Lock Nuts plus one ordinary hexagon nut,one wing nut,one hub nut,4 screws, 2 washers, Bracket size: 7inch length, 2.4 inch width, Long bolt size: 6.3 inch. Short bolt size: 4.3 inch.Instructions included.
- 【Function】: Spare tire mount for utility trailer,Tire Carrier
Holder Mount Bracket mount your spare tire directly to the wall of your trailer or the walls of the garage,fasten tire. Save precious space. At the same time, It is convenient to repairing and carrying.
- 【Easy to Carry】: Spare trailer tire mount tire tight and flush against the inside wall of an enclosed trailer.Spare tire mount for utility trailer easy to carry and install,not only shortens installation time, but also facilitates tire maintenance.
- 【SUITABLE FOR】Our trailer spare tire holder compatible with 4 5 6 Lugs Trailer Wheels on 4", 4.5'', 4.75'', 5'' and 5.5'' Bolt Patterns. Because of its universal compatibility, it is also good for using as the boat spare tire mount,camper
spare tire mount and rv spare tire mount.
- 【150 LBS HEAVY DUTY】The spare tire mount for boat trailer is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place, angled and raised mount design make it can hold up to 150 Lbs.
- 【Robust & Durable】The industrial solid iron and sandblasting process gives trailer spare tire holder a durable, smooth and attractive surface also resist rust and corrosion. Tightened the screws, your spare tire mount will no longer have the risk of losing a tire.
- 【EASY TO INSTALL】The features of this spare tire mount for utility trailer is a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
- 【TIPS】 The spare tire mount is suitable for all racks less than 6 inches in length and more than 2 inches in width less than 4 inches. Since each trailer has a different shelf width, please measure the shelf thickness you need to use this product before purchasing. If you have any questions, please contact me in time, I will provide you with the most satisfactory solution.
- Enhanced Design: This folded edged spare tire carrier
is engineered for trailers and boat trailers, increasing bend strength by 100% to provide solid support for your spare tire.
- Heavy-Duty Durability: Constructed with a triangular welded structure, this spare tire mount holds up to 180 lbs. Its powder-coated finish resists rust and corrosion, making it ideal for utility trailers and boat trailers.
- Universal Compatibility: Compatible with multiple bolt patterns (4-lug, 5-lug, and 6-lug), this spare tire holder fits most trailers and boat trailers, making it a versatile addition to your setup.
- Quick Installation: Easy, no-drill installation with just a wrench. This spare tire mount for utility trailers attaches to tongues up to 4 inches wide and 6 inches high, making the process quick and hassle-free.
- Complete Kit: Comes with all necessary bolts for a seamless installation on your trailer or boat trailer spare tire mount, saving you time and effort.
- Upgraded 3 Nut:3 Nut design can better lock the tire, reduce the vibration and noise when driving, thus avoiding the nut loosening and tire falling.
- Safe travel: Spare tire carrier
is made of high quality precision steel, powder coated surface, rust and corrosion resistant, maximum load capacity of 150 pounds, so that travel safety is no longer a hidden danger.
- Bending design: Innovative multi-layer bending steel panels to enhance the bending resistance of 300%, reinforced and laser welded to provide three layers of protection for safe travel, can become your long-term old buddy.
- Wide Adaptability: No need to worry about the adaptability, the trailer spare tire mount is compatible with most wheels. Suitable for 4 lugs X 4"/4.25"/4.5" diameter holes, 5 lugs X 4.25"/4.5"/4.75"/5"/5.5" diameter holes, 6 lugs X 5.5"/6" diameter holes, 8 lugs X 6.5" diameter holes spare tires.
- Ready-to-install: Installation can be done in minutes. No drilling, one wrench to install and remove, complete with parts, no need to buy extra!
- 【Widely use】Spare tire mount bracket fits for trailer frames up to 2" or 3" wide(the max tire size is up to 15"),and for 4 or 5 lug wheels (bolt styles: 4 on 4 or 5 on 4-1/2).
- 【Easy to use】Simply tighten the nut and the installation is complete.It will match most all trailer studs and nut sizes.
- 【Heavy duty construction】Made of heavy duty steel coated with zine to prevent rust and corrosion.
- 【Easy to place】Trailer spare tire mount is easy to place and fits nice for your spare tire on trailer.Thread length is 3inch.
- 【Package Included】1Pcs U-bolt tire bracket,2 nuts and gaskets.
- ✅ Upgraded Tire Fit: Compatible most wheels with Compatible with Compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern.
- ✅ Wide Range Compatibility: This spare tire bracket mounts on trailer tongues up to 4" wide and 5" tall
- ✅ Heavy Duty Construction: The trailer spare tire mount is design to hold Max load up to 120 lbs with high quality forged iron. And power coated black paint finish make it rust and corrosion resistant
- ✅ Hardware Included: The included zinc-plated hardware make you can easily set up the spare tire mount to your trailer
- ✅ What You Get: Spare tire carrier
sets with hardware, our worry-free 18-month warranty and friendly customer service
- [Replacement Part Number]- 924-510, 20870067, 15703311, 15866164 . Before Ordering, Please Confirm Whether The Accessories Are Suitable For Your Vehicle To Confirm Compatibility.Only Fit For 5 Or 6 LUG Wheel, NOT Fit 8 LUG Wheel
- [FIT FOR] -Compatible With CHEVY GMC
Vehicles: 1999-2017 Silverado 1500,2001-2006 Silverado 1500 HD,1999-2004 Silverado 2500,2001-2004 Silverado 2500 HD,2000 Chevy Suburban 1500 2500, Tahoe,99-17 GMC
Sierra 1500,2001-2006 Sierra 1500 HD,99-04 Sierra 2500 ,01-04 Sierra 2500 HD,2000 GMC
Yukon, XL 1500, XL 2500 And More.Easy Installation And Perfect Fit
- [Advantage]- As Time Goes By, The Spare Tire Hoist Is Impacted By Muddy Water And Gravel On The Road For A Long Time, And It Will Slowly Fail. You Cannot Put It Down In Time When You Need To Use The Spare Tire.Our Spare Tire Hoist Is Completely Designed And Manufactured According To OEM, Which Can Be Replaced Perfectly, And Updated Design Without The Secondary Safety Latch Or Lock . The Price Is Only A Small Part Of The Dealer!
- [High performance]-Long Service Life,TOP quality Spare Tire Hoist, Made Of Premium Quality For Strong Stability And Long Lasting Durability.Crafted From Surface-Treated Reinforce Steel For Increased Corrosion Resistance, To Outlast Any Other Aftermarket Winch Available. Provide Maximum Durability And Excellent Performance!
- Fit type: Vehicle Specific
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.