| “This site contains affiliate links for which OEMDTC may be compensated” |
August 7, 2020 NHTSA CAMPAIGN NUMBER: 20V463000
Potential Axle Spindle Weld Failure
A failure of the axle increases the risk of crash and/or injury.
NHTSA Campaign Number: 20V463
Manufacturer American Hauler
Components SUSPENSION
Potential Number of Units Affected 64
Summary
American Hauler is recalling certain 2018 Air-Lite, Arrow, Falcon/XC and Night Hawk cargo trailers equipped with Dexter
D52 axles. The axles of these trailers may have spindle weld failures.
Remedy
American Hauler will notify owners, and dealers will inspect the axles and replace them if necessary, free of charge. Owners may contact Dexter Axle at 574-295-7888.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
NHTSA Safety Recall: RCAK-20V463-6068
Date: September 23, 2020
VIA MAIL
CUSTOMER NOTIFICATION
This Notice is sent to you in accordance with the requirements of the United States National Traffic and Motor Vehicle Safety Act.
REASON FOR THE RECALL
American Cargo Group has decided that a defect which relates to motor vehicle safety exists in certain 2018 Air-Lite, Arrow, Falcon/XC and Night Hawk cargo trailers equipped with Dexter D52 axles. Our records indicate that your vehicle is included in the affected population of vehicles.
On or about March 2020 Dexter Axle notified American Cargo Group, that they were issuing a voluntary recall on their D52 Axle Model sold to us between July 2018 and Aug. 2018. There is a potential spindle weld failure which could cause the axle to fall off and result in personal injury, property damage or both.
WHAT SHOULD YOU DO
Observe the axle serial number engraved into the back of the axle tube. The axle serial number will be a 9-digit number. If the axle serial number is 133158559, the axle is considered suspect and will need to be replaced.
If your inspection is complete and the axles inspected are not part of the suspect serial number, you may submit an invoice to Dexter for the inspection and processing time. For immediate processing of your recall inspection, please send a copy of your invoice tous0004-recall@dexteraxle.com. The following information will be required on your invoice:
1) Submitter contact information
2) Inspected unit VIN number
3) Dexter Axle Serial Number(s)
If an authorized dealer for any reason is unable to remedy the situation without charge, or within a reasonable amount of time, pursuant to law 49 U.S.C. Chapter 301, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1800-424-9153); or go to https://www.safercar.gov.
Regards,
Vicki Kelich
Customer Service Manager
American Cargo Group
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| AMERICAN HAULER | AIR-LITE | 2018 |
| AMERICAN HAULER | ARROW | 2018 |
| AMERICAN HAULER | FALCON/XC | 2018 |
| AMERICAN HAULER | NIGHT HAWK | 2018 |
6 Associated Documents
Defect Notice 573 Report
RCLRPT-20V463-6619.PDF 215.086KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-20V463-6068.pdf 244.765KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20V463-9736.pdf 108.541KB
Loading...
Recall Quarterly Report #1, 2020-3
RCLQRT-20V463-4930.PDF 211.117KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-20V463-3472.PDF 215.534KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-20V463-8816.PDF 215.534KB
Loading...
Latest Recalls Documents
- Self-Adjusting Electric Brake: Say goodbye to manual adjustments! Dive into the world of 12" x 2" electric trailer brake assemblies that self-adjust. It's not just smart; it's efficient and gives your trailer that smooth braking touch.
- Hassle-Free Installation: DIY's best friend! Our electric trailer brake is straightforward and a breeze to install. It's ready to install right out of the box and boasts high compatibility. Wherever you are, installation is just a few steps away.
- Built for the Long Haul: Keep on rolling! With a lifespan of up to 30,000 kilometers, these trailer brakes are in it for the long haul, designed for your trailer's daily adventures. Constructed from premium materials, our brakes promise robust durability and resistance to wear and tear.
- Versatility at Its Best: The trailer brake kit has a broad range of applications, including towing trailers, transporting goods, camping trips, and more. It's compatible with Dexter, AL-KO (a brand under the former), and other trailer axles.
- Top-Notch Packaging: When it comes to packaging, we don't just box; we care. Our trailer electric brake kit is packaged above industry standards. Every brake is meticulously checked and wrapped to ensure what you get is nothing short of perfect.
- Premium Material: This brake drum is made of high-quality iron and uses electroplating technology to protect the drum body, enabling it to work normally in various environments. At the same time, the brake drum is resistant to rust and corrosion, greatly extending the service life of the product.
- About The Drum and Self-Adjusting Electric Brakes: Classic design and rich production experience make the brake drum more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer. It’s designed for 3500 lb Axles.
- Package Including: 2*brake drum 5 hole, 4.5" bolt, 2*Bearing inner ring replace for L68149( I.D:1.377", O.D:2.164"), 2*Bearing inner ring replace for L44649(I.D:1.062", O.D:2.058"), 2*grease seal(I.D: 1.718" O.D: 2.56" height: 0.5" ), 2*dust cover(Mounting diameter:1.988"), 2*rubber plug dust cover(Mounting diameter:1.988"), 10*hub nut, 1*left electric brake, 1*right electric brake, 8*spring washer, 8*nut(7/16-20UNF), 2* hexagon slotted nut, 2*flat washer, 2* cotter pin.
- Suit for: Pair of trailer 5 on 4.5" hub drum kits and 10" x 2 1/4" electric adjusting brakes fit for Dexter and other brands 3500lbs trailer axle. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer. Not fit for 1-1/16" Straight spindle and 1" Straight spindle.
- After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.
- ⭐ Compatible with: Fit for Dexter/ for Al-Ko/ for Lippert and other brands 5,200 lbs, 6,000 lbs, and 7,000 lbs trailer axles.
- ⭐Kit Includes: 2* 12" x 2" left electric brake, 2* 12" x 2" right electric brake
- ⭐Production and Installation: Strictly follow automotive standards and comply with the G3000 standard in the US; Easy to install
- ⭐Product Introduction: The AEagle electronic brake features non-asbestos brake linings for superior friction performance, ensuring longevity and enhanced braking capabilities.
- 🔧Quality Assurance: 12-month warranty! Tested before shipping.
- 10" x 2.25"electric trailer brake assembly (left & right side), fit most 3500lbs - 4000lbs trailer axle; 4-hole mount w/mounting bolt
- Fits the wheel bolt pattern 4 lug,fits spline size #84 steel drum; center hole diameter: 3" ; bolt circle diameter: 4"
- Replace 023-026-00 and 023-027-00；77-10-2；23-105, 23-106，296649；replace Dexter Lippert Al-Ko,etc brake assemblies
- The electric brakes are NOT self adjusting, unlike most drum brakes on cars and trucks,need to be done when installed and periodically thereafter.If you cannot adjust yourself, please find a professional adjustment
- JADODE electric and hydraulic trailer brake parts Making it an Ideal Choice for Travelers Seeking a Hassle-Free Power Solution
- Compatible with: Fit For Alko/ for Dexter/ for Quality, and other brands 3,500lbs trailer axle
- Kit Includes: 1x 10" x 2.25" left electric brake assemblies, 1x 10" x 2.25" right electric brake assemblies, 8x spring pad, 8x nut
- Production and Installation: Strictly follow automotive standards and comply with the G3000 standard in the US; Easy to install
- Product Introduction: The AEagle electronic brake features non-asbestos brake linings for superior friction performance, ensuring longevity and enhanced braking capabilities.
- Quality Assurance: 12-month warranty! Tested before shipping.
- Electric Brakes: Classic design and rich production experience make the brake drum and electric brake more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer.
- Fit for: 2 pair of 10" X 2-1/4" electric brake fit for Dexter and other brands 3500lbs trailer axle.
- Note: Bolt on application to standard 4-hole pattern ***BOLTS NOT INCLUDED***
- Package Including: 2*10” Left Electric Brake, 2* 10” Right Electric Brake, 16* Spring washer, 16*nut.
- After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.
- Set of two 12" x 2" electric trailer brake assembly, for most 5200lbs 6000lbs 7000lbs trailer axle；Center hole diameter: 3-1/4"
- 7000 lb trailer brakes fits the wheel bolt pattern 6 lug or 8 lug,fits spline size #42 steel brake drum.Bolt hole spacing: 2.0" O.C. around the top,Bolt hole spacing: 3.0" O.C.across the bottom
- Replace ：K23-180-00，K23-181-00；77-12EA-1-2；replace Axletech B12E-22 (12x2)；Al-Ko Lippert,etc
- The trailer brakes are NOT self adjusting, unlike most drum brakes on cars and trucks,need to be done when installed and periodically thereafter.If you cannot adjust yourself, please find a professional adjustment
- JADODE electric and hydraulic making it an ideal choice for travelers seeking a hassle-free power solution
- Premium LIBRA brand OE 10" x 2-1/4" electric trailer brake assemblies (2 left + 2 right) for two axles
- works with most 3,500 lbs trailer axles in the market
- Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included
- Exchange with Dexter brake # 023-026-00/023-027-00
- Pair of 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)
- Pair of 10" x 2 1/4" TruRyde Self-Adjusting electric backing plates
- Works with Al-Ko, Dexter, Lippert, and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
- Comes with TruRyde bearings, seals, lug nuts, open and closed grease caps, cotter pins, spindle washers, tang washers, spindle nuts, and brake mounting washers and nuts
- Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649)
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.