โThis site contains affiliate links for which OEMDTC may be compensatedโ |
August 19, 2020 NHTSA CAMPAIGN NUMBER: 20V492000
Rear LED Lights Too Bright/FMVSS 108
The excessive brightness may affect the vision of other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 20V492
Manufacturer Spartan Fire, LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1
Summary
Spartan Fire, LLC (Spartan) is recalling one 2018 Gladiator vehicle equipped with Code 3
7×9 Stop-Tail-Turn Reverse All-in-One LED stop, tail, turn, and reverse lights. The lights may be too bright, exceeding the maximum light output allowed which may adversely affect the vision of drivers. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Spartan will notify the owner and instruct them to contact Code 3 to obtain a filter kit (part number CZ0199), free of charge. The recall began January 13, 2021. Owners may contact Spartan customer service at 1-866-582-2376. Spartan’s number for this recall is 20-10.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
January 13, 2021
This notice applies to the vehicle identification number below.
Charlestown-Oregon Twp Fire Prot Dist
PO Box 373
Charlestown IN 47111
Dear Valued Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Spartan Fire, LLC has decided that a defect which relates to motor vehicle safety exists in a model year 2018 Gladiator model emergency response chassis cab.
Please note: The Vehicle Identification Number that maybe affected by this recall is located at the top of this letter.
What is the defect?
Vehicles included in this recall have All-In-One Stop/Tail/Turn/Reverse LED lamps that are being recalled by their manufacturer, Code 3. According to the lamp manufacturer, the subject lamps exceed the maximum permissible candela levels specified in Federal Motor Vehicle Safety Standard (FMVSS) No. 108 at certain test points. The increased photometric intensity does not comply with the requirements of FMVSS108 and may adversely affect the vision of following drivers, which could lead to a crash.
Corrective Action:
Code 3 is providing a filter kit (Part No. CZ0199) to be installed. The kit will ensure that the lamps perform within the permissible photometric intensity ranges. The Owner of the vehicle can install the filter kit or can contact their Spartan Fire
Dealer and a technician will install the filter kit for them. There is no cost to the vehicle owner for the recall remedy.
Labor Time:
Estimated time for the remedy is 0.5 hours.
What You Should Do:
Please contact Code 3 at (314) 426-2700 or c3_orders@code3esg.com to obtain a filter kit (Part No. CZ0199).
If you need further assistance with this notification, contact your local dealer to have the work performed. If you cannot locate a dealer, call Spartan at 1-800-867-6478 to locate your nearest dealer. Steps will betaken to ensure the recall is performed at the nearest dealer.
Leased Vehicles:
The lessor must notify the lessee by first class mail within ten (10) days from receipt of their owner notification letter from the manufacturer; both for the initial notification and all subsequent notifications.
Reimbursement:
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information contact Spartan at 1โ800โ867-6478.
Reply Card:
Please fill out the enclosed prepaid postcard and mail it to us if you have changed your address, sold, or traded the vehicle.
If the authorized service center has failed or is unable to remedy the defect without charge and within a reasonable time, contact Spartan at 1-800-867-4678. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov if you feel the manufacturer has failed or is unable to remedy the defect without charge
We regret any inconvenience this service may cause you. Your safety and continued satisfaction with the quality and performance of your chassis is of the utmost concern to us.
Sincerely,
Spartan Fire, LLC
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SPARTAN FIRE![]() | GLADIATOR | 2018 |
3 Associated Documents
Owner Notification Letter(Part 577)
RCONL-20V492-4797.pdf 283.822KB
Recall Quarterly Report #1, 2021-1
RCLQRT-20V492-2911.PDF 211.127KB
Defect Notice 573 Report
RCLRPT-20V492-4489.PDF 213.345KB
Latest Recalls Documents
www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V492&docType=RCL
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- Voltage 12-24 V
- Stop-Tail-Turn-Reverse and Warning Light Combo
- These low-profile, multifunctional lights maximize visibility on the back of the vehicle
- Use them to indicate stop-turn-tail-reverse with steady burn red and white colors
- When warning lights are activated, the dual-color lights provide 69 attention-grabbing flash patterns
- Long lasting and durable material
- Easy and flexible to use
- Manufactured in China
- Amber LEDs
- Vibration and Shock-Resistant Construction
- Ultrasonically Sealed Housing
- Sync-capable with additional 3811s
- Certified SAE Class 1 and California Title 13
- SAE CLASS 1 SURFACE MOUNT LED
- AMBER, 3. 3IN X 1. 1IN X . 4IN
- This amber led warning light produces vibrant 12 flash patterns flashes
- ECO-3920A 12 Vdc 0.8
- Made in United States
- Package Dimensions : 6.5 L x 0.57 H x 2.0 W (inches)
- Package Weight : 0.5 pounds
- ECO-5585CAC-VM 12-24 VDC 5.1
- The package length is 3.6 centimeters
- The package height is 16.8 centimeters
- The package width is 10.2 centimeters
- LED (6), Flood Beam, Round, 10-30VDC
- Aluminum heatsink housing
- Polycarbonate lens
- Steel mounting bracket
- Package Dimensions: 5.0 L x 14.7 H x 5.8 W (centimeters)
- Made in China
- Package Weight : 0.55 pounds
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.