| “This site contains affiliate links for which OEMDTC may be compensated” |
October 14, 2020 NHTSA CAMPAIGN NUMBER: 20V634000
Incorrect GAWR on Certification Label/FMVSS 120
Incorrect weight rating information on the certification labels could result in potential overloading of the axles, increasing the risk of a crash.
NHTSA Campaign Number: 20V634
Manufacturer Daimler Trucks
North America LLC
Components TIRES, EQUIPMENT
Potential Number of Units Affected 53
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2020-2021 Western Star 4700 and 4900 and Freightliner Coronado, 108SD and 114SD vehicles. The vehicle certification label contains incorrect information, stating a Gross Axle Weight Rating (GAWR) that exceeds the tire capacity rating. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, “Wheels and Rims-Other than passenger cars.”
Remedy
DTNA will notify owners, and dealers will install accurate GAWR labels, free of charge. The recall began November 25, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-864.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a non-compliance defect that relates to motor vehicle safety exists on the vehicles mentioned above.
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the certification label lists an incorrect higher capacity of the tires, which can lead to possible overloading of the tires and increase the likelihood of a crash.
The certification label will be replaced with a new one indicating the correct GAWR for the tires.
IMPORTANT: Advance arrangements are required. When a customer contacts you regarding this Recall, place an order for the certification label.
There are approximately 56 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260).
Replacement Parts
Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below from your facing Parts Distribution Center.
If our records show your dealership has ordered any vehicle(s) involved in campaign number FL864, a list of the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when ordering parts for this recall.
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-864
Date of Submission: October 14, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: ⃝ Safety Defect X Non-Compliance
Vehicle Information
Model Yr. Start: 2020 Model Yr. End: 2021
Make: Freightliner, Western Star
Model: Coronado, 114SD, 4700, 4900, 108SD
Production Dates: Begin: 04/26/2019
End: 03/09/2020
Descriptive Information:
Certification labels on certain vehicles contain a higher GAWR (Gross Axle Weight Rating) than the tire
capacity rating.
Number potentially involved: 53 Estimated percentage of involve with defect: 100%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On the affected vehicles, the vehicle certification label contains incorrect information and thus fails to
comply with the requirements of Federal Motor Vehicle Safety Standard No. 120, “Tire Selection and
Rims for Motor Vehicles Other Than Passenger Cars.” The Gross Axle Weight Rating (GAWR), states
20000 lbs, however the tires are rated for lower values.
If a noncompliance, provide the applicable FMVSS:
FMVSS 120
Describe the safety risk:
Incorrect weight rating information on the certification labels could result in potential overloading of the
axles and increase the likelihood of a crash
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision:
Late September 2020, DTNA received dealer feedback during repair for FL-847 of a second label with
incorrect information that was not being replaced. As a result, DTNA reviewed the labeling of the
population that was addressed under FL-847 and found additional labels with the same issue. As a result
of this review, on October 8, 2020 DTNA decided to conduct a voluntary recall for the second label that
was not covered by FL-847.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Vehicles will be updated with accurate GAWR labels. Repairs will be performed by Daimler Trucks North
America authorized service facilities. Details of the reimbursement plan will be included in the owner’s
notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date: 12/12/2020
Planned Dealer Notification End Date: 12/12/2020
Planned Owner Notification Begin Date: 12/12/2020
Planned Owner Notification End Date: 12/12/2020
Manufacture’s identification code for this recall (if applicable): FL-864
DTNA Representative;
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
****************************************************************************************************************
Subject: Tire Rating Labels
Models Affected: Specific Model Year 2020-2021 Freightliner
108SD, 114SD, and Coronado vehicles; Western Star 4700, and
4900 vehicles manufactured April 26, 2019, through
March 9, 2020.
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned
subsidiary, Western Star Truck Sales, Inc., has decided that a non-compliance defect that relates to motor
vehicle safety exists on the vehicles mentioned above.
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the certification label lists an incorrect higher
capacity of the tires, which can lead to possible overloading of the tires and increase the likelihood of a crash.
The certification label will be replaced with a new one indicating the correct GAWR for the tires.
IMPORTANT: Advance arrangements are required. When a customer contacts you regarding this Recall, place
an order for the certification label.
There are approximately 56 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a
vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns
before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a
reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a
completion sticker (Form WAR260).
Replacement Parts
Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below
from your facing Parts Distribution Center.
If our records show your dealership has ordered any vehicle(s) involved in campaign number FL864, a list of
the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list
when ordering parts for this recall.
Table 1 – Replacement Parts for FL864
Campaign
Number Part Type Part Description Part Number Qty. per Kit
FL864A OTHER
Certification Label 24-01810-001 1 ea
BLANK COMPLETION STICKER WAR260 1 ea
Table 1
Label Ordering:
• Login to DTNAConnect portal.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 1
• Under “DTNACONNECT RESOURCES” on the left side of the homepage, expand the “Service and References”
list, and click on “Request for Certification Label or OWI”. See Fig. 1. A page titled “Request for
Replacement Vehicle Documentation” will open.
05/11/2020 f400425
Fig. 1, DTNAConnect Homepage
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 2
05/11/2020 f400426
A
B
C
A. Select “Certification Label
Request”.
B. Enter the VIN. C. Enter the dealer code.
Fig. 2, Request for Replacement Vehicle Documentation
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 3
• Enter the vehicle identification number (VIN), and select “Certification Label Request”. Enter dealer code
in the ‘Company Code’ box. See Fig. 2.
Removed Parts
U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the
disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised.
Labor Allowance
Table 2 – Labor Allowance
Campaign
Number Procedure Time Allowed
(hours) SRT Code Corrective Action
FL864A Replace Certification Label 0.3 996-R117A 12-Repair Recall/Campaign
Table 2
IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location
on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle
does not have a base completion label, clean a spot on the appropriate location of the vehicle and first
attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker
in the kit, write the recall number on a blank sticker and attach it to the base completion label.
05/11/2020 f400427
A
B
A. Enter “For Recall FL864” in the
text box.
B. Click on “Review”.
Fig. 3, Reason for Certification Label Request
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 4
• Enter the text “For Recall FL864” in the “ADDITIONAL INFORMATION FOR CERTIFICATION LABEL REQUEST”
box below. Then click on “Review”, and submit the request. See Fig. 3.
Claims for Credit
You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting
your claim through the Warranty system within 30 days of completing this campaign. Please reference the
following information in OWL:
• Claim type is Recall Campaign.
• In the Campaign field, enter the campaign number and appropriate condition code (FL864-A).
• In the Primary Failed Part Number field, enter 25-FL864-000.
• In the Parts field, enter the appropriate part number as shown in the Replacement Parts Table and claim
as part type ’OTHER’.
• In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will
be included automatically as SRT 939-6010A for 0.3 hours.
• The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
• U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement,
please do the following:
• Accept the documentation of the previous repair.
• Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement.
(See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.)
• Submit an OWL Recall Pre-Approval Request for a decision.
• Include the approved amount on your claim in the Other Charges section.
• Attach the documentation to the pre-approval request.
• If approved, submit a based on claim for the pre-approval.
• Reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the
campaign has not been previously completed. Also, check for a completion sticker prior to beginning work.
U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at
DTNAConnect.com / WSC, if you have any questions or need additional information. Export distributors, submit
a Web inquiry or contact your International Service Manager.
The letter notifying U.S. and Canadian vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code,
Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to
you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie
evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day
period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the
vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in
full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless
all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the
lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors
and retail outlets within five working days.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 5
U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a
Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing
PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number.
Export Distributors: Excess inventory is not returnable.
Copy of Notice to Owners
Subject: Tire Rating Labels
For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor
Vehicle Safety Act. For the Notice to Canadian Customers: This notice is sent to you in accordance with the
requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may be non-compliant with
the requirements of the Motor Vehicle Safety Regulations and that the non-compliance could affect the safety of
a person.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned
subsidiary, Western Star Truck Sales, Inc., has decided that a non-compliance defect that relates to motor
vehicle safety exists on specific Model Year 2020-2021 Freightliner 108SD, 114SD, and Coronado vehicles;
Western Star 4700 and 4900 vehicles manufactured April 26, 2019, through March 9, 2020.
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the certification label lists an incorrect higher
capacity of the tires, which can lead to possible overloading of the tires and increase the likelihood of a crash.
IMPORTANT: Advance arrangements are required for this Recall in order to ensure labels are available for your
vehicle at the dealership.
The certification label will be replaced with a new one indicating the correct GAWR for the tires.
Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and
to ensure that parts are available at the dealership. To locate an authorized dealer, go to
www.Daimler-TrucksNorthAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and
select the appropriate brand. The Recall will take approximately one half hour and will be performed at no
charge to you. You may also confirm your vehicle’s involvement in this recall at this URL:
https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage.
You may be liable for any progressive damage that results from your failure to complete the Recall within a
reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall
Notification, please return the notification to the Warranty Campaigns Department with any information you can
furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that
you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law
requires that you forward this notice to your distributors and retail outlets within five working days. If you have
paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement.
Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address
DTNA.Warranty.Campaigns@Daimler.com. For the Notice to U.S. Customers: If you are not able to have the
defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC
20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov.
For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact
Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle
safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Daimler Trucks
North America LLC Recall Campaign
November 2020
CAMPAIGN #FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 6
Reimbursement to Customers for Repairs
Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the
repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following
documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
• The name and address of the person who paid for the repair
• The Vehicle Identification Number (VIN) of the vehicle that was repaired
• What problem occurred, what repair was done, when the repair was done
• Who repaired the vehicle
• The total cost of the repair expense that is being claimed
• Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt)
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.
Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter.
Daimler Trucks
North America LLC Recall Campaign
November 2020
CAMPAIGN #FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 7
Work Instructions
Subject: Tire Rating Labels
Models Affected: Specific Model Year 2020-2021 Freightliner
108SD, 114SD, and Coronado vehicles; Western Star 4700, and
4900 vehicles manufactured April 26, 2019, through
March 9, 2020.
Label Replacement Procedure – FL864
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the federal motor vehicle safety standard
(FMVSS) certification label lists an incorrect higher capacity for the tires, which can lead to possible overloading
of the tires and increase the likelihood of a crash.
The FMVSS certification label will be replaced with a new one indicating the correct GAWR for the tires.
Freightliner 108SD, 114SD, and Coronado Vehicles
1. Check the base label (Form WAR259) for a completion sticker for FL864 (Form WAR260) indicating this
work has been done. The base label is usually located on the passenger-side door about 12 inches (30 cm)
below the door latch. If a completion sticker is present, no work is needed. If a completion sticker is not
present, continue with the next step.
2. Park the vehicle on a level surface, apply the parking brakes, and shut down the engine. Chock the tires.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 8
04/08/2020 f080186
1
2
3
4
1. Customer Assistance Label
2. FMVSS Certification Label
3. Noise Emission Label
4. Entry/Exit Warning Label
Fig. 5, Approximate Component Label Location
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 9
3. Open the driver side door and locate the FMVSS certification label Fig. 4 attached to the B-pillar Fig. 5.
08/31/2020 f080199
DAIMLER TRUCKS N.A. LLC
07/15
52,000
23,587 110
120
120
S
S
S
MANUFACTURED BY:
DATE OF MFR:
GVWR/ PNBV- LBS:
GVWR/ PNBV- KG:
THIS VEHICLE COMPLIES WITH ALL
APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS IN EFFECT AT THE DATE
OF MANUFACTURE SHOWN ABOVE.
VEHICLE ID NO:
TYPE: TRUCK/ TRACTOR TT /CT
1FUJGBDV4GLZZ9999
COUNTRY OF ORIGIN: U.S.A.
PSI “S”
COLD
12,000
20,000
20,000
LBS
GAWR/ PNBE
9,072
KGS
GAWR/ PNBE
5,443
9,072
FRONT AXLE:
2ND INT AXLE:
3RD INT AXLE:
4TH INT AXLE:
5TH INT AXLE:
6TH INT AXLE:
REAR AXLE:
1ST INT AXLE:
275/80R22.5(G)
445/50R22.5(L)
445/50R22.5(L)
TIRES
22.5X8.25
22.5X14.0
22.5X14.0
RIMS
COLD
KPA
758
827
827
Fig. 4, Freightliner FMVSS Certification Label Example
NOTICE
NOTICE: Care should be taken while removing the label. Do not damage the paint.
5. Remove the current FMVSS certification label by peeling the clear topcoat label off, and then remove the
white base label.
6. Clean the adhesive residue from the label location.
7. Ensure that the area on the B-pillar is clean and dry, then affix the new FMVSS certification label with the
correct GAWR on it.
8. Affix a new clear topcoat label over the new FMVSS certification label.
9. Clean a spot on the base label (Form WAR259), write recall number FL864 on a blank red completion
sticker (Form WAR260), and attach it to the base label.
11/23/2020 f400429a
COMPONENT LABEL
NOISE LABEL
EMISSIONS LABEL -000 ONLY
SERIAL NUMBER LABEL
CUSTOMER
ASSISTANCE
LABEL
WARRANTY BOOK LABEL
MEXICO CERTIFICATION LABEL
OR
VEHICLE EMISSION LABEL
PRINTS ON INTERMEC
-001/-002 ONLY
CANADA COMPLIANCE LABEL
OR
COMPONENT GWR LABEL
CERTIFICATION LABEL
Fig. 6, FMVSS Certification Label Location, Recall Kit, Freightliner
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 10
4. Locate the new FMVSS certification label. See Fig. 6 for the location of this label on label sheet.
Make sure the VIN on the current FMVSS certification label matches the VIN on the new FMVSS certification
label.
10. If the vehicle was certified by a body builder based on the previous GAWR listed on the FMVSS certification
label, it will need to be recertified by the body builder based on the current GAWR rating.
Western Star 4700 and 4900 vehicles
1. Check the base label (Form WAR259) for a completion sticker for FL864 (Form WAR260) indicating this
work has been done. The base label is usually located on the passenger-side door about 12 inches (30 cm)
below the door latch. If a completion sticker is present, no work is needed. If a completion sticker is not
present, continue with the next step.
2. Park the vehicle on a level surface, apply the parking brakes, and shut down the engine. Chock the tires.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 11
09/23/2020 f602784
1
2
3
1. Canada Certification Label
2. FMVSS Certification Label
3. Noise Emission Label
Fig. 8, Western Star Driver’s Door B-Pillar Labels
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 12
3. Open the driver side door and locate the FMVSS certification label Fig. 7 attached to the B-pillar Fig. 8.
08/03/2020 f080206
DAIMLER TRUCKS N.A. LLC
04/19
53,220
24,140 120
105
105
S
D
D
MANUFACTURED BY:
DATE OF MFR:
GVWR/PNBV-LBS:
GVWR/PNBV-KG:
THIS VEHICLE COMPLIES WITH ALL
APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS IN EFFECT AT THE DATE
OF MANUFACTURE SHOWN ABOVE.
VEHICLE ID NO:
TYPE: TRUCK/TRACTOR TT/CT
XXXXXXXXXXXXXXXXX
COUNTRY OF ORIGIN: U.S.A.
PSI “S”
COLD
13,220
20,000
20,000
LBS
GAWR/PNBE
9,072
KGS
GAWR/PNBE
5,996
9,072
FRONT AXLE:
2ND INT AXLE:
3RD INT AXLE:
4TH INT AXLE:
5TH INT AXLE:
6TH INT AXLE:
REAR AXLE:
1ST INT AXLE:
11R22.5(H)
11R22.5(G)
11R22.5(G)
TIRES
22.5X8.25
22.5X8.25
22.5X8.25
RIMS
COLD
KPA
827
724
724
CAN ICES-2
/ NMB-2
Fig. 7, Western Star FMVSS Certification Label Example
NOTICE
NOTICE: Care should be taken while removing the label. Do not damage the paint.
5. Remove the current FMVSS certification label by peeling the clear topcoat label off, and then remove the
white base label.
6. Clean the adhesive residue from the label location.
7. Ensure that the area is clean and dry, then affix the new FMVSS certification label with the correct GAWR
on it.
8. Affix a new clear topcoat label over the new FMVSS certification label.
9. Clean a spot on the base label (Form WAR259), write recall number FL864 on a blank red completion
sticker (Form WAR260), and attach it to the base label.
10. If the vehicle was certified by a body builder based on the previous GAWR listed on the FMVSS certification
label, it will need to be recertified by the body builder based on the current GAWR rating.
11/23/2020 f400432a
COMPONENT LABEL
NOISE LABEL
EMISSION LABEL -000 ONLY
SERIAL NUMBER LABEL
WARRANTY BOOK LABEL
CUSTOMER
ASSISTANCE
LABEL
VEHICLE EMISSION LABEL
PRINTS ON INTERMEC
-001/-002 ONLY
CANADA COMPLIANCE LABEL
COMPONENT GWR LABEL
CERTIFICATION LABEL
Fig. 9, FMVSS Certification Label Location, Recall Kit, Western Star
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 13
4. Locate the new FMVSS certification label. See Fig. 9 for label location on label sheet.
Make sure the VIN on the current FMVSS certification label matches the VIN on the new FMVSS certification
label.
10 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FREIGHTLINER | 108SD | 2020-2021 |
| FREIGHTLINER | 114SD | 2020-2021 |
| FREIGHTLINER | CORONADO | 2020-2021 |
| WESTERN STAR | 4700 | 2020-2021 |
| WESTERN STAR | 4900 | 2020-2021 |
8 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-20V634-7449.PDF 214.627KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-20V634-1869.pdf 244.915KB
Loading...
Miscellaneous Document- Defect Information Report
RMISC-20V634-1703.pdf 958.779KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V634-7757.pdf 402.758KB
Loading...
Recall Quarterly Report #1, 2020-4
RCLQRT-20V634-4260.PDF 211.148KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20V634-3914.pdf 54.444KB
Loading...
Recall Quarterly Report #2, 2021-1
RCLQRT-20V634-1658.PDF 211.248KB
Loading...
Recall Quarterly Report #3, 2021-2
RCLQRT-20V634-5053.PDF 211.333KB
Loading...
Latest Recalls Documents
- [Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Global Support] Rest assured about compatibility with your vehicle and language – ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.
- [ABS Diagnosis] - Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
- [SRS Diagnosis] - Quickly detect the airbag ECU itself, airbag sensor failure, airbag system plug disconnection or poor contact, seat belt sensor failure, or system error, etc, to ensure that the SRS (Supplemental Restraint system) is working properly. After repair, reset the system to clear the warning light and restore full safety performance. NOTE: It cannot reset Airbag crash or transmission codes.
- [Full OBD2 Function] - Read and clear trouble codes for all OBD2 systems, including show real-time data, freeze frame data, I/M Readiness, DTC lookup, test results for o-xygen sensor, On-board monitor test, request vehicle information, component test, modules present and e-vap test. Allowing you to quickly identify and troubleshoot vehicle issues.
- [AutoVIN Technology] - It simplifies diagnostics by automatically identifying the vehicle’s model and configuration, eliminating the need for manual input, and ensures accurate diagnostics by applying the correct data and algorithms, reducing errors caused by manual entry. Improves efficiency and streamlines the diagnostic process.
- [ABS Auto Bleeding] - Helps bleed your vehicle's Anti-lock Braking System (ABS), removing air from the brake lines to ensure optimal brake performance. It helps prevent brake issues such as spongy pedals, inconsistent braking, and reduced stopping power, and enhances vehicle safety by ensuring the ABS system is working properly, especially during critical driving situations. NOTE: It’s not compatible with vehicles that only support manual bleeding.
- 【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- 【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- 【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- 【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- 【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
- Updated New Version AD600S: Discover the improved version of TOPDON AD600S OBD2 scanner. Now immerse yourself in a seamlessly diagnostic experience with Android 11.0 OS. With an upgraded 32G ROM, this scan tool offers ample storage and faster performance. The 5-inch display with 1280x720 resolution offers high-definition clarity, ensuring easy readability for every diagnostic detail
- Professional 4 Systems Diagnostics: For car owners dealing with common issues such as engine, transmission, ABS, and SRS, the TOPDON AD600S code scanner delivers professional diagnostic services. It easily reads and clears fault codes, analyzes data streams and more, ensuring a quick identification of problems. Additionally, the DTC Lookup function provides corresponding fault code analysis
- 9 Hot Reset Functions: Say goodbye to costly trips to the repair shop for resetting after routine maintenance such as changing oil, replacing tires, or installing new brake pads. The AD600S diagnostic tool effortlessly tackles common automotive challenges with just one click. Cut costs and cut the hassle with its 9 reset functions: Oil/BMS/ABS/SAS/EPB/DPF/TPMS/Throttle/injector coding
- Support for 10,000+ Car Models: The upgraded AD600S car scanner now supports 67+ global brands and 10,000+ models, ensuring compatibility with a diverse range of vehicles. Whether American, German, French, or Japanese, the AD600S diagnostic scanner has you covered. (Note: Contact TOPDON customer service for vehicle compatibility inquiries before purchase)
- Life time Free Updates: The AD600S diagnostic tool offers free upgrades with convenient one-click updates via Wi-Fi. Our dedicated TOPDON technical team continuously enhances our product's software, providing users with expanded vehicle support and an improved user experience through regular updates
- Pro-level ABS SRS OBD2 Scanner - Based on the NT301 FOXWELL Scanner, this car scanner takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS Diagnostic Trouble Codes, display the Live Data: Wheel Speed Sensor, Airbag Issues, Wiring Faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader can only read SRS codes but CANNOT reset any Airbag crash codes. Please check the functions coverage BEFORE purchasing. NO Need to Register &Subscription.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensor, brake force distribution, and brake pressure with dynamic graphs for easy analysis. Effortlessly read ABS trouble codes and access freeze frame data to identify and resolve system issues. This ABS scanner diagnostic tool also monitors ABS performance during emergency braking or on slippery surfaces, providing alerts for potential problems.
- Basic OBDII Scanner Functions - This obd2 scanner diagnostic tool also can Check Engine Fault Light, diagnose OBD-II modules instantly, display the Live Data with graph (engine RPM, coolant temperature, fuel trim, and sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
- Top ABS Bleed Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This OBD2 scanner with ABS auto bleed will restore your brake pedal’s firmness by efficiently removing air from the ABS module. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site. NOTE: This feature is NOT compatible with vehicles that support manual bleed.
- User-Friendly & Budget-Friendly - Enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know）. This car code reader comes with a sturdy case for easy carrying. The code reader for cars will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet. To connect the tool to the App, please DO NOT go to device's Bluetooth settings, instead, open RepairSolutions2 App and follow the instructions on the App to pair the BLCKTEC 430.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 Elite car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
- 【2025 Newly Added 3 Reset Functions】CRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- MAINTAIN PEAK PERFORMANCE AND SAFETY ON THE ROAD - Easily find and fix the problem with your vehicle using the INNOVA 5610 bidirectional scan tool. This OBD2 scanner diagnostic tool provides real-time solutions to troubleshoot issues. Access OBD2 and OEM live data with ease, making it an essential car scanner diagnostic tool. Perfect for those seeking reliable car diagnostic scanner and code readers & scan tools for all vehicles.
- PRO-LEVEL FUNCTIONALITIES - Use the INNOVA 5610’s Enhanced Data Stream to view live data for advanced systems like ABS, SRS, transmission, and engine. The Special Reset Function lets you use dealership-level re-learn procedures. This car diagnostic scanner is ideal for those needing a bidirectional scan tool or mechanic tools automotive for professional repairs. Compatible with select vehicle makes and models; not universal.
- COMMAND WITH BIDIRECTIONAL CONTROLS - The INNOVA 5610 bidirectional scan tool sends commands to test functions such as fuel pump on/off or retracting the electronic parking brake. With this car scanner diagnostic for all cars, you can operate like a pro. Ideal for those seeking a car code reader and reset tool or advanced fixd car diagnostic tool capabilities. Compatible with select vehicle makes and models; not universal.
- EASY TO USE - The INNOVA 5610 OBD2 scanner diagnostic tool supports English, Spanish, and French. Easily use this scanner for car on most 1996 - 2023 (2024 coming soon) OBD2 vehicles to verify repairs. Designed for ease of operation, it’s a dependable code reader for cars and trucks and check engine code reader. To confirm vehicle coverage, please utilize Innova's Coverage Checker.
- BUY AND DRIVE WITH CONFIDENCE - Backed by ASE-Certified support, this car scanner pairs with the RepairSolutions2 app, trusted by 3.4M users, for wireless OBD scanner functionality. With free updates and no subscription fees, this durable car computer diagnostic reader ensures you’re prepared for any repair. A must-have diagnostic scanner for all vehicles.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.