9903525 – Motor In Bedlift System May Fail – 2021 Jayco Vision, Emblem, Vision XL, Alante, Precept, & Precept Prestige Recreational Vehicles

“This site contains affiliate links for which OEMDTC may be compensated”

October 28, 2020 NHTSA CAMPAIGN NUMBER: 20V662000

Motor In Bedlift System May Fail

If the bed releases unexpectedly from the stowed position while moving, it could contact the driver and possibly block their vision, increasing the risk of a crash and injury.

 

NHTSA Campaign Number: 20V662

Manufacturer JaycoeBay, Inc.

Components EQUIPMENT

Potential Number of Units Affected 165

 

Summary

JaycoeBay, Inc. (JaycoeBay) is recalling certain 2021 Vision, Emblem, Vision XL, Alante, Precept, and Precept Prestige recreational vehicles, equipped with a Power Bedlift System. The bedlift motor may fail due to internal gear failure, causing the overhead bunk bed to release from the stowed position.

 

Remedy

JaycoeBay will notify owners, and dealers will replace the bed motor, free of charge. The recall began November 18, 2020. Owners may contact JaycoeBay customer service at 1-800-517-9137. JaycoeBay’s number for this recall is 9903525.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


20E-074

EUROLOFT BED LIFT MOTOR REPLACEMENT

 



6 Affected Products

Vehicles

MAKEMODELYEAR
JAYCOeBayALANTE2021
JAYCOeBayEMBLEM2021
JAYCOeBayPRECEPT2021
JAYCOeBayPRECEPT PRESTIGE2021
JAYCOeBayVISION2021
JAYCOeBayVISION XL2021

 


12 Associated Documents

Recall Quarterly Report #2, 2021-1

RCLQRT-20V662-3824.PDF 211.226KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Recall Quarterly Report #1, 2020-4

RCLQRT-20V662-7370.PDF 211.127KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall Quarterly Report #3, 2021-2

RCLQRT-20V662-7833.PDF 211.307KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.35 KB]

 


Remedy Instructions and TSB

RCRIT-20V662-2930.pdf 1738.183KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.66 MB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V662-3428.pdf 55.402KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [54.10 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-20V662-5170.pdf 141.824KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [138.50 KB]

 


Defect Notice 573 Report

RCLRPT-20V662-2947.PDF 213.531KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.53 KB]

 


Recall Acknowledgement

RCAK-20V662-3194.pdf 289.028KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.21 KB]

 


Recall 573 Report – Amendment 1

RCLRPT-20V662-2335.PDF 213.721KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.71 KB]

 


Recall 573 Report – Amendment 2

RCLRPT-20V662-1798.PDF 213.736KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.73 KB]

 


Recall Quarterly Report #2, 2021-1

RCLQRT-20V662-1414.PDF 211.225KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall Quarterly Report #4, 2021-3

RCLQRT-20V662-8902.PDF 211.412KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.46 KB]

 


Latest Recalls Documents

 


 

b

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Hatchlift RV Bed Lift Kit - Queen Size - Gas Strut Hardware for Heavy Lids - Adjustable Bed Lift System - Durable Gas Shocks for RV Compartments for Queen Standard Mattress
  • Bed lift Kits are NOT REPLACEMENT SPRINGS. For new installation - Recreational Vehicles Only. No Foam Mattresses
  • Order the correct kit for your CURRENT RV BED. Do not order for a "future" mattress upgrade or adding a pillow topper later
  • PARTIAL PLATFORM BEDS - measure the inside compartment dimension BEFORE ORDERING.
  • Bed lift Kits require installation. WOODWORKING / MECHANICAL SKILLS NECESSARY
  • BLK-QUEEN Bed lift kits include mounting hardware, wood blocks and 2 - 20" x 80 lb. gas springs for installing both sides of the RV bed.
Bestseller No. 2
WEST ORGIN RV Bedlift Kit, Compartments 24” – 30” Small, Compatible with RV and Recreational Vehicles with Storage Boxes, BLK-SMALL Bed Lift Kits
  • 1. Only compatible with RV and recreational vehicles with storage boxes, the internal size is 24"-30"
  • 2. Note: The product needs to be drilled and installed
  • 3. Including installation hardware, wood blocks and 2-17" by 80 lb gas springs(432 mm x 352N)
  • 4. Not applicable to bunk beds in slide-out beds with fixed base platforms, side load applications or RV beds
  • 5. Please confirm whether your model is suitable before buying
Bestseller No. 3
Hatchlift Products Bedlift Kit Queen Oversize
  • Bed Lift kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information.
  • For RV QUEEN BEDS with oversize residential mattress or standard mattress with heavy pillowtopper. No lightweight RV or lightweight Foam Mattresses (For Lightweight, order Bedlift Queen Lite)..
  • Kit includes two 20” x 120 lb gas springs (508mm x 528N), wood spacer blocks, mounting hardware and complete installation instructions.
  • WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation
  • Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs.
Bestseller No. 4
Hatchlift Products RV Bedlift - Small Compartment 24" - 30" with Lite Weight Mattress
  • For RV Beds with storage compartments 24” - 30” with Lightweight RV or lightweight Foam Mattresses.
  • Kit includes two 17” x 40 lb gas springs (432mm x 176N), wood spacer blocks, mounting hardware and complete installation instructions.
  • WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation.
  • Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs.
  • BedLift Kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information for other sizes.
Bestseller No. 5
Hatchlift Products Bedlift Kit King Standard
  • RV BedLift kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information for available sizes
  • For RV KING BED with STANDARD Mattress.
  • Kit includes two 20” x 100 lb gas springs (508mm x 440N), wood spacer blocks, mounting hardware and complete installation instructions.
  • WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation.
  • Note: Bedlift Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs.
Bestseller No. 6
Dukuge Heavy Duty Universal Gas Struts 23 inch with Mounting Brackets for RV Bed, 100lbs Gas Shocks Spring Lift Kit for Basement Storage Door Mattress Heavy Lid and DIY Project, Set of 2
  • [Common Applications of DIY]: RV bed storage door, heavy box lid, trash bin lid, RV mattress, TV outdoor cabinet, consumer bar window, floor hatch and trap door
  • [Detailed Parameters You Need]: Extended length(hole to hole) 23.00 inch. Compression length(hole to hole) 13.55 inch. Force 100 lb 445 N(fit for 80-110 pound). Removable steel integrated connector (8 mm thread diameter)
  • [Open Cover with Finger Easily]: Easier cover opening and stable support
  • [3-step Installation]: 1. Locate the mounting point (location of ball stud) 2. Secure the mounting bracket 3. Install the gas strut. Follow the instructions for the above steps, or get an installation video from the internet
  • [Complete Kit (Excl.Screws)]: 2 x 23in gas spring with integral connector, 4 x thickened mounting bracket, 4 x nuts, 1 x installation instruction. Note: Screws are not included
Bestseller No. 7
Dyna-Living Bed Lift Mechanism 22kg/48.5lbs Load Capacity Hydraulic Bed Lift Kit Pneumatic Gas Spring Bed Lift Heavy Duty Bed Storage Lift for Storage Bed Box or Sofa Bed
  • [22kg/48.5lbs Load Capacity Bed Lift Mechanism]- The bed lift mechanism is made of heavy-duty high-quality steel, the single bed lift mechanism can load 22kg/48.5lb, and the load capacity of a pair of heavy-duty bed lifts is 20KG/44.09LB-40KG/88.18LB, so it is recommended for bed boards, mattresses, sofas weight 20-40kg.
  • [2.03Ft/62.0cm Bed Lift Mechanism Kit]- The 2.03Ft/62.0cm bed storage lift kit is available for 0.9m/2.95FT small bed or single storage bed, tatami bed, storage locker or sofa bed. The hydraulic mechanism can be oriented for opening from the side or end of the bed, which can fully open or half-open.
  • [High-quality Gas Rod Spring]-A pair of high-quality gas rod springs with high gloss oil layer technology, precision oil seal, no oil leakage; Mute buffer throughout, easy to lift and compress.
  • [Long-lasting and Sturdy]- The bed lift hydraulic mechanism is made of thickened cold-rolled steel, with strong bearing capacity and is not easy to deform; The surface of the bracket has strong anti-scraping and abrasion resistance. Rust and corrosion-resistant to ensure the bed lift's durability.
  • [Widely Applications]-The bed lift mechanism kit is equipped with some screws, only need to make holes and tighten screws, easy to install; Bed storage lift hardware is ideal for lifting mattresses, beds, sofas or bed cabinets to provide additional storage space under the bed or sofa.
SaleBestseller No. 8
PAMAGOO 20 inch 150 lbs Gas Strut Shocks Spring for Heavy Lids RV Bed Lift Kits, 20" 668 N Gas Props with L-Type Mounts for Heavy Duty Lid Toolbox Basement Floor Door Window, 2 Pack
  • Use Scenarios: 20" gas strut universal used for - RV Bed, Murphy bed, Truck bed cover, Trailer door, DIY trash bin, Outdoor bar window, TV cabinet, chicken coop, dog house, toy tool storage box, RV doors, etc
  • Parameter: Extended Length: 20.04 Inches, Compressed Length 12.13 inches, Force: 668N/150Lbs Per Strut, this pair of 20" 150# gas struts can support the lid weighing 120-165 pounds
  • About Install: We have gas spring installation videos and online service to guide quick installation in minutes. After installation, the Door/Window can be lifted easily.
  • Package Details: 20 inch 150 lbs gas prop struts X 2,4 L-Type Mounting Brackets: 2 right brackets, 2 left brackets, and an installation guide
  • Pamagoo Care: We provide 24 hours online selection & installation guide and 18 months quality support for every customer, please check the fitment part number on your old struts or measure your lid weight as per instruction to ensure buy correctly
Bestseller No. 9
rv%20bedlift%20kit" title="Dyna-Living Bed Lift Mechanism 4.6 FT Hydraulic Bed Lift Kit 90kg/198lbs Load Capacity Pneumatic Gas Spring Platform Bed Lift Mechanism Heavy Duty Bed Hydraulic Lift Mechanism for Storage Bed" rel="nofollow noopener sponsored" target="_blank"> Lift Mechanism 4.6 FT Hydraulic Bed Lift Kit 90kg/198lbs Load Capacity Pneumatic Gas Spring Platform Bed Lift Mechanism Heavy Duty Bed Hydraulic Lift Mechanism for Storage Bed" title="9903525 - Motor In Bedlift System May Fail - 2021 Jayco Vision, Emblem, Vision XL, Alante, Precept, & Precept Prestige Recreational Vehicles 18">
Dyna-Living Bed Lift Mechanism 4.6 FT Hydraulic Bed Lift Kit 90kg/198lbs Load Capacity Pneumatic Gas Spring Platform Bed Lift Mechanism Heavy Duty Bed Hydraulic Lift Mechanism for Storage Bed
  • [4.6Ft/140cm Bed Lift Mechanism Kit]- The 4.6FT/140cm rv bed lift kit is available for 1.5*2M/5.0*6.5FT queen size storage bed, tatami bed, storage locker or sofa bed. The hydraulic mechanism can be oriented for opening from the side or end of the bed, which can fully open or half-open.
  • [90KG/198LB Large Load Capacity]-The load capacity of per piece bed lifting mechanism is 90kg/198lbs, and the load capacity of a pair of heavy-duty bed lifts is 90KG/198LB-130KG/286.6LB, so it is recommended for bed boards, mattresses, sofas weight 110-130kg.
  • [Durable and Sturdy]- The bed lift hydraulic mechanism is made of thickened cold-rolled steel, with strong bearing capacity and is not easy to deform; The surface of the bracket has strong anti-scraping and abrasion resistance. Rust and corrosion resistant to ensure bed lift's durability.
  • [High-quality Gas Rod Spring]-A pair of high-quality gas rod springs with high gloss oil layer technology, precision oil seal, no oil leakage; Mute buffer throughout, easy to lift and compress.
  • [Widely Applications]-The platform bed lift mechanism heavy duty equipped with some screws, only need to make holes and tighten screws, easy to install; Bed hydraulic lift mechanism is ideal for lifting mattresses, beds, sofas or bed cabinets to provide additional storage space under the bed or sofa.
Bestseller No. 10
20Inch 45Lbs 200N Gas Strut Spring Shock Lift Kit for RV Queen Bed Door Outdoor Storage Bin Heavy Duty Murphy Truck Bed Canopy Cover Basement Door Floor Boat Hatch Trash Box Lid 2pcs by IAQWE
  • [GAS STRUTS PARAMETER]: Force: 45Lbs/200N 20 Inch per Strut, a pair of 2 struts. Extended Length: 19.96”, Compressed Length: 12.20”. Ball Joint Diameter: 10mm. Very Strong! Can not compress directly by your hands.
  • [45LBS 20INCH GAS STRUTS]: Suitable for RV Queen Bed Storage, Heavy Duty, Truck Bed Canopy, Marine Projects, outdoor box cover, Outdoor trash bin, travel trailer ramp, CampereBay Bed, Basement Door, Hatch Cover, rv trailer cover, boat hatch lid, Bar Window, Tonneau Cover, Chicken Coop, Heavy Duty, Large Cabinet, Floor Hatch and so on.
  • [45LBS GAS STRUTS]: Package include Struts* 2 with L-type Mounts* 4, Installation Guide* 1.Scope of application: 34-50lbs. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!
  • [PREMIUM 20INCH GAS STRUTS]: IAQWE gas spring can work normally in patio, topper window, Underground hatch, boat, garbage bin cover, tool box lid, tent and other outdoor areas. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support.
  • [GAS SPRING SUPPORT]: 36-months Quality support! Any issues, just mail us via Amazon, and we will solve for you within 24 Hours.

Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...