October 28, 2020 NHTSA CAMPAIGN NUMBER: 20V662000
Motor In Bedlift System May Fail
If the bed releases unexpectedly from the stowed position while moving, it could contact the driver and possibly block their vision, increasing the risk of a crash and injury.
NHTSA Campaign Number: 20V662
Manufacturer Jayco
, Inc.
Components EQUIPMENT
Potential Number of Units Affected 165
Summary
Jayco
, Inc. (Jayco
) is recalling certain 2021 Vision, Emblem, Vision XL, Alante, Precept, and Precept Prestige recreational vehicles, equipped with a Power Bedlift System. The bedlift motor may fail due to internal gear failure, causing the overhead bunk bed to release from the stowed position.
Remedy
Jayco
will notify owners, and dealers will replace the bed motor, free of charge. The recall began November 18, 2020. Owners may contact Jayco
customer service at 1-800-517-9137. Jayco
’s number for this recall is 9903525.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
20E-074
EUROLOFT BED LIFT MOTOR REPLACEMENT
SEOCONTENT-START
Bedlift System- Defective Motor
Incident:
Motor in the LCI P2K Bedlift System may fail due to internal gear failure, causing the bed to extend from a stowed position.
Affected Units:
2021 Alante M1AS4066-4087 AU4074-4093
2021 Precept M1UG4069-4074, 4077-4090. 4092 UL4052-4055, 4057-4059,4061,4063, 4065-4066, 4070-4071,4073-4075 UV4051-4056, 4058
2021 Emblem M1DH8051-8063 DU8051-8061, 8065
2021 Vision M1AF8066 AS8066-8085 AU8051-8075
2021 Vision XL M1UG8064, 8066-8067, 8070-8072, 8074-8080
Parts Kit:
Parts Kit #: 20V-662
Parts Kit Contents: 1 motor
Jayco
’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined by Jayco
in our sole discretion. Jayco
reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to make parts and/or design changes as appropriate without notice to anyone. Jayco
designs and/or materials changes are done without obligation to incorporate such changes in previously manufactured product. Jayco
makes every reasonable effort to ensure field remedies will not adversely affect performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or parts beyond the standard warranty period. The RV owner’s obligation to notify Jayco
, or one of its independent, authorized dealers, of a claimed defect does not modify any obligation placed on the RV owner to contact Jayco
directly when attempting to pursue remedies under state or federal law. Jan. 2019.
903 South Main Street • P.O. Box 460 • Middlebury, IN 46540
Bulletin Type:
Safety Recall
Bulletin #(s):
20V-662 US Units
2020-548 CN Units
Job Code:
9903525
Flat Rate:
.8 hour
Publication Date:
November 18, 2020
Make(s):
Jayco![]()
Entegra
Model(s):
Alante, Precept, Precept Prestige
Emblem, Vision, Vision XL
Model
****************************************************************************************************************
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco
has decided that a defect, which relates to motor vehicle safety, exits in certain 2021 Vision, Vision XL, Emblem, Alante, Precept and Precept Prestige Class A motorhomes equipped with a LCI P2K Bedlift system.
The electric motor of the bed lift system may fail which could allow the bed to drop downward from a stowed position until caught by safety straps increasing the risk of injury to occupants and possible crash while driving.
Replace the defective motor of the bedlift system. This remedy is free of charge, and will take approximately 1 hour to complete.
Please contact your Dealer and set an appointment for this remedy.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 800-517-9137. If you are unable to get this safety defect remedied without charge and/or within a reasonable amount of time after contacting your dealer and Jayco
customer service, you may want to contact NHTSA. To submit a written complaint, contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Compliance Management
Jayco
Motorized
Safety Recall: 20V-662
November 18, 2020
Reason for this recall
What we need you to do
Recall Remedy
***********************************************************************************************************
IMPORTANT SAFETY RECALL
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco
has decided that a defect, which relates to motor vehicle safety, exits in certain 2021 Vision, Vision XL, Emblem, Alante, Precept and Precept Prestige Class A motorhomes manufactured with a LCI P2K Bedlift system.
The electric motor of the bed lift system may fail which could allow the bed to drop downward from a stowed position until caught by safety straps increasing the risk of injury to occupants and possible crash while driving
Replace the defective motor of the bedlift system. All pertinent information regarding this recall is available under the Applications > Recalls section of the website.
Our records show the following unit is affected by this recall, and is part of the current inventory at your Dealership.
1JSMEABR2M1AF8066
Before placing an order for the Recall Parts Kit, please confirm the unit serial number requires the Recall Remedy, using CASE RECALL LINES in Jayco
Partners. The Instructions for the Recall Remedy are available under the Case Recall 20V-662 (US) and 2020-548 (CN) attachments.
Federal law requires the Recall Remedy completed on this unit prior to customer delivery.
If you sold this unit recently, please contact the owner immediately to inform them of this recall. In addition, please register this unit by submitting the Warranty Registration information. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Compliance Management
Jayco
Motorized
Safety Recall: 20V-662
November 18, 202
Reason for this recall
What we need you to do
Recall Remedy
SEOCONTENT-END
6 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| JAYCO | ALANTE | 2021 |
| JAYCO | EMBLEM | 2021 |
| JAYCO | PRECEPT | 2021 |
| JAYCO | PRECEPT PRESTIGE | 2021 |
| JAYCO | VISION | 2021 |
| JAYCO | VISION XL | 2021 |
12 Associated Documents
Recall Quarterly Report #2, 2021-1
RCLQRT-20V662-3824.PDF 211.226KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V662-7370.PDF 211.127KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V662-7833.PDF 211.307KB
Remedy Instructions and TSB
RCRIT-20V662-2930.pdf 1738.183KB
ISSUED Owner Notification Letter(Part 577)
RCONL-20V662-3428.pdf 55.402KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V662-5170.pdf 141.824KB
Defect Notice 573 Report
RCLRPT-20V662-2947.PDF 213.531KB
Recall Acknowledgement
RCAK-20V662-3194.pdf 289.028KB
Recall 573 Report – Amendment 1
RCLRPT-20V662-2335.PDF 213.721KB
Recall 573 Report – Amendment 2
RCLRPT-20V662-1798.PDF 213.736KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V662-1414.PDF 211.225KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20V662-8902.PDF 211.412KB
Latest Recalls Documents
b
- Compatibility & Usage: Hatchlift RV bed lift kits are not replacement springs and are for new RV installations only. Incompatible with foam mattresses. Order the correct kit for your current RV bed, not future upgrades/toppers.
- Ordering Guidelines: Order the correct kit for your current RV bed setup. Do not purchase for future mattress upgrades or adding a pillow topper later—kits are designed for existing configurations only.
- Measurement Requirements: For partial platform beds, measure the inside compartment dimensions before ordering. Accurate measurements ensure proper fit and functionality for your RV storage needs.
- Installation Requirements: These kits require woodworking/mechanical skills for installation. Not compatible with bunk beds, radius beds, side-load beds, or fixed base beds in slide-outs (deck, mattress, and base must slide together).
- Included Components: BLK-QUEEN kits include mounting hardware, wood blocks, and two 20" x 80 lb. gas springs. Perfect for standard queen-sized RV beds with moderate-weight particle board decks.
- IDEAL for RV BEDS and STRORAGE COMPARTMENTS: Transform your RV storage experience with the Hatchlift Bedlift Kit. Designed for RV beds with compartments between 24" and 30" long, this kit works seamlessly with lightweight foam or RV mattresses. Thanks to the strong gas struts, lifting and accessing under-bed storage has never been easier or smoother.
- ENHANCED LIFTING PERFORMANCE with GAS SPRINGS: Upgrade your RV bed with high-performance gas struts and lift struts. These gas shocks deliver a controlled, smooth, and reliable lift, making them an ideal match for heavy lids and mattresses in motorhomes, fifth wheels, and travel trailers. Ideal for everyday use, these gas springs ensure effortless operation, even with frequent use.
- COMPLETE KIT for EASY INSTALLATION: Everything you need is included! The Hatchlift Bedlift Kit comes with two 17" x 40 lb gas springs (432mm x 176N), wood spacer blocks, mounting hardware, and easy-to-follow instructions. You’ll have everything to enhance your bed’s storage access in no time!
- SIMPLE INSTALLATION with BASIC SKILLS: Installation is a breeze for anyone with basic woodworking and mechanical skills. This kit is designed to fit most RV beds and compartments, making it easy to upgrade your storage space with the help of powerful gas spring struts. Simply follow the clear instructions for a fast, hassle-free setup.
- TRUST HATCHCLIFT for QUALITY and DURABILITY: When it comes to RV accessories, Hatchlift is a name you can trust. Specializing in gas springs and struts for RVs and marine applications, Hatchlift delivers reliable performance and long-lasting durability. Please note: this kit is not a replacement for existing springs—check out Hatchlift’s Replacement Springs for your needs.
- Bed lift Kits are NOT REPLACEMENT SPRINGS. For new installation - Recreational Vehicles Only. No Foam Mattresses
- Order the correct kit for your CURRENT RV BED. Do not order for a "future" mattress upgrade or adding a pillow topper later.
- Bed lift Kits require installation. WOODWORKING / MECHANICAL SKILLS NECESSARY
- BLK-SMALL Bed lift kits include mounting hardware, wood blocks and 2 - 17" by 80 lb. gas springs for installing both sides of the RV bed.
- EXCLUSIONS: Bunk Beds, Side Load Applications, or RV beds in Slide Outs with Fixed Base Platforms.
- Easy Heavy Lid Lift - Engineered with industrial-grade gas spring tech, this 20" 100lb hydraulic strut delivering smooth and consistent lifting force that lets you effortlessly open 80-110lbs heavy lids like tool box, truck bed or RV beds solo, eliminating back strain and streamlining daily access
- Easy Heavy Lid Lift - Engineered with industrial-grade gas spring tech, this 20" 100lb hydraulic strut delivering smooth and consistent lifting force that lets you effortlessly open 80-110lbs heavy lids like tool box, truck bed or RV beds solo, eliminating back strain and streamlining daily access
- All-Weather Durability - Crafted from premium Grade 45 carbon steel with mirror chrome plating and wear-resistant hydraulic oil, perform reliably in -40°F to 110°F extreme temperatures, resisting leaks and pressure loss far better than standard struts to deliver year-round lift support in Arizona heat or Minnesota snow
- High-Quality Material for Longevity - Built with industrial-grade 45# high-carbon steel, multi-layer chrome plating and premium anti-wear hydraulic fluid, these struts endure 50,000+ compression cycles without force loss, resisting rust and oxidation to outlast alternatives—install once and avoid costly replacements
- Complete 2-Pack Kit - This package includes 20-inch 100lb gas springs*2, mounting brackets*4, M8 nuts*4, Instruction manual*1, Coustomer Service card*1 (mounting screws for brackets are not included), enabling installation in under 30 minutes with standard tools to prevent lid warping and extend hinge life
- 1.Replacement: The RV Bed Lift Kit is only compatible with RV and recreational vehicles with storage boxes, and the internal size is 24"-30".
- 2. Measurement Tip: For partial platform beds, please measure the inside compartment dimensions carefully before placing your order—accurate measurements are key to ensuring a proper fit and optimal functionality that meets your RV storage needs.
- 3. Installation Requirement: Please note this kit is not compatible with bunk beds, radius beds, side-load beds, or fixed-base beds in slide-outs (deck, mattress, and base must slide together).
- 4.Product function: This RV Bed Lift Kit can be easily adjusted and secured to your bed frame, providing you with more convenience during your travels.
- 5. Complete Kit Includes:Including installation hardware, wood blocks and 2-17" by 80 lb gas springs(432 mm x 352N).
This product presentation was made with AAWP plugin.



