| “This site contains affiliate links for which OEMDTC may be compensated” |
December 21, 2020 NHTSA CAMPAIGN NUMBER: 20E092000
Brake Light Pressure Switch Malfunction
Jammed electrical contacts in the brake light switch can cause the brake lights to remain illuminated, or fail to illuminate. Either of these scenarios can increase the risk of a crash.
NHTSA Campaign Number: 20E092
Manufacturer Bendix
Commercial Vehicle Systems, LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1,701
Summary
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain SL-4 Brake Light Pressure switches with part numbers K101993, K101996, K108141, and K108142 manufactured between December 1, 2019 and January 31, 2020. When air pressure is supplied to the brake light switch it may leak, possibly causing the internal electrical contacts to become jammed.
Remedy
Bendix will notify owners, and dealers will replace the brake light switch, free of charge. The recall began March 4, 2021. Owners may contact Bendix customer service at 1-877-345-9526.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Technical Bulletin
| Bulletin No: TCH-006-006 | Effective Date: 3/1/2021 | Cancels: N/A |
Subject: BENDIX® SL-4™ STOP LIGHT SWITCH RECALL
(PART NUMBERS K101993, K101996, K108141, AND K108142)
Bendix Commercial Vehicle Systems LLC is conducting a voluntary safety recall campaign, Recall No.: 20E092, involving the Bendix® SL-4™ stop light switch (K101993, K101996, K108141, and K108142). This includes SL-4 stop light switches manufactured between December 1, 2019 and January 31, 2020, inclusive.
Identification:
Impacted SL-4 stop light switches, manufactured between December 1, 2019 and January 31, 2020, can be identified by the date code printed on a white Bendix label affixed to the unit. The date code, featuring a “Month/Year” format, will appear in black or red type. For example, an SL-4 stop light switch manufactured in December of 2019 will have a date code of “12/19.” An SL-4 stop light switch with a date code of either “12/19 or 1/20” would represent one of the potentially affected units that is included in the recall campaign. Products outside of this specified date code range are not affected.
Problem Description:
Bendix has determined that a component manufactured at a Bendix sub-supplier was not within specification limits and has led to the defect – improperly formed threads do not provide necessary clamp loads to withstand normal air brake system pressures. This may cause the SL-4 switch to remain in either the open or closed state, resulting in the vehicle stop lamps staying illuminated or failing to extinguish promptly. If the pressure switch is used to control the brake lamps, the result of the jammed contacts might be that the brake lights do not illuminate or that the brake lights constantly remain illuminated increasing the likelihood of a crash.
NOTE: It’s also important to note that the service, parking, and emergency brakes of the vehicle are not affected by this condition. In addition, there is no impact to stopping distance or parking performance of the vehicle if this issue arises.
A leaking switch may make an audible sound that can be detected by the driver during operation or during pre-trip inspection. The driver may also notice the stop lamp is illuminated during pre-trip inspection. A warning light may appear on the vehicle dash. There have been no reports of any injuries or accidents related to this issue.
Vehicles Affected:
This recall affects only a limited population of vehicles utilizing an SL-4 stop light switch – Bendix Part Numbers K101993, K101996, K108141, and K108142 – manufactured between December 1, 2019 and January 31, 2020, inclusive.
What You Need To Do:
Immediately stop using and/or selling any of the SL-4 stop light switches that fall within the recall parameters. It is a violation of Federal law for a dealer or distributor to sell a stop light switch that is subject to this recall. Ensure your customers are aware of the recall campaign.
Inventory Disposition:
If your current parts inventory, including vehicles still within your possession, contains SL-4 stop light switches (Bendix Part Numbers K101993, K101996, K108141, and K108142) manufactured between December 1, 2019 and January 31, 2020, inclusive, please contact Shelly Neff at our Huntington, Indiana, Customer Service Center. Please phone Shelly Neff, toll-free, by calling 1-800-AIR-BRAKE, ext. 4417 (1-800-247-2725, ext. 4417) to arrange for the return of any affected inventory currently in stock. As a reminder, you will need to place an offsetting order to replenish the returned stock.
For instructions on replacing the SL-4 stop light switch, reference SD-06-1800, Bendix® SL-3™ and SL-4 Stop Light Switch Service Data Sheet, on bendix.com.
Administering the Recall:
Bendix is directing vehicle owners with an impacted Bendix® SL-4™ stop light switch to request a replacement switch directly from us. Owners will be instructed as to the steps to take in a separate communication.
Submitting A Claim:
Visit the Product Action Center (https://www.bendix.com/en/servicessupport/recallcenter/recallcenter_1.jsp) on bendix.com to download the Bendix SL-4 Stop Light Switch (Part Numbers K101993, K101996, K108141, and K108142) Recall Submission Form.
- Print the form and supply all the required information.
- To start the reimbursement process, return the form to Bendix in one of two ways:
- Scan and email all documents to SL4campaign21@bendix.com (preferred method); or.
- Send via U.S. Mail/Canadian Post to:
- Scan and email all documents to SL4campaign21@bendix
Bendix Commercial Vehicle Systems LLC
Attention: Kevin Lenhart
901 Cleveland Street Elyria, OH 44035
Disposition of the Impacted SL-4 Stop Light Switches:
You are authorized to scrap impacted SL-4 stop light switches that are removed from vehicles. These switches are not required to be returned to Bendix.
Action Required For Identifying the Recalled Bendix® SL-4™ Stop Light Switch
Identifying Bendix® SL-4™ Stop Light Switches Covered in this Field Action
The Bendix® SL-4™ stop light switch includes a date code printed on a white Bendix label affixed to the unit. The date code, featuring a “Month/Year” format, appears in red type. Stop light switches covered by this campaign would have a date code of either 12/19 or 01/20. For example, an SL-4 stop light switch manufactured in December of 2019 will have a date code of “12/19” in red type, and an SL-4 stop light switch manufactured in January of 2020 will have a date code of “01/20” in red type. Verification of the date code is required to determine if the stop light switch is a part of the recall campaign.
If the date code is either 12/19 or 01/20, it can be assumed the stop light switch is part of the recall campaign and needs to be replaced. If the date code is neither 12/19 nor 01/20, it can be assumed the stop light switch is not affected by this recall or the switch has already been replaced.
March X, 2021
Via UPS Overnight Delivery
Name
Title
Company
Street Address
City, State, Zip
Dear (Name):
IMPORTANT RECALL INFORMATION – RESPOND IMMEDIATELY
This is to inform you that Bendix Commercial Vehicle Systems LLC (Bendix) notified the National Highway Traffic Safety Administration (NHTSA) of the start of a voluntary safety recall campaign involving the Bendix® SL-4™ stop light switch assembly. The recall has been assigned number 20E092.
A copy of our December 21, 2020, Defect and Noncompliance Information Report submission to NHTSA can be found on the NHTSA website (https://www.nhtsa.gov/recalls) under recall number 20E092. As required by law, Bendix provided NHTSA a list of all vehicle manufacturer customers to whom Bendix sold the affected products. (Company name) is one of the customers who may be affected by this recall.
IMPACTED PRODUCT
This recall includes all Bendix SL-4 stop light switch assemblies – part numbers K101993, K101996, K108141, and K108142 – manufactured between December 1, 2019 and January 31, 2020, inclusive.
Affected SL-4s can be identified by the presence of a date code printed on a white Bendix label affixed to the unit. The date code, featuring a “Month/Year” format, will appear in red or black type. For example, an SL-4 assembly manufactured in December of 2019 or January of 2020 will have a date code of “12/19 or 01/20”. An SL-4 switch with a date code ranging from “12/19” to 01/20” would represent one of the potentially affected units and is included in this recall effort.
This action does not affect SL-4 stop light switches manufactured prior to or after the stated dates. Please refer to the Bendix SL-4 Stop Light Switch Identification Guideline enclosed with this document for complete details.
PROBLEM DESCRIPTION
Bendix has determined that a component manufactured at a Bendix sub-supplier was not within specification limits and has led to the potential defect – improperly formed threads do not provide necessary clamp loads to withstand normal air brake system pressures. This may cause the SL-4 switch to remain in either the open or closed state, resulting in the vehicle stop lamps staying illuminated or not extinguishing promptly. If the pressure switch is used to control brake lamps, the result of the jammed contacts might be that the brake lights do not illuminate or that the brake lights constantly remain illuminated increasing the risk of a crash.
It’s also important to note that the service, parking, and emergency brakes of the vehicle are not affected by this condition. In addition, there is no impact to stopping distance or parking performance of the vehicle if this issue arises.
WHAT WE WILL DO
Bendix Commercial Vehicle Systems LLC (Bendix) will voluntarily remedy the defect of the impacted Bendix® SL-4™ stop light switch assembly, with parts from a later build range that do not have the potential defect.
The part(s) – that enable you and your customer to complete the recall remedy – are available as of the date of this notification via your standard parts ordering process. As a reminder, the part(s) will be provided to you free of charge and the installation labor charge to complete the remedy will be covered by Bendix.
Finally, please note that we are directing impacted vehicle owners to work through their vehicle OEM to obtain this recall remedy.
WHAT YOU NEED TO DO
First, we are providing you with this information to enable your business to determine whether there is a safety related defect on your vehicles where the affected Bendix SL-4 stop light switch assembly has been installed.
Based on your determination, you may need to file a Defect and Noncompliance Report to the National Highway Traffic Safety Administration (NHTSA) with respect to new motor vehicles with an affected Bendix SL-4 stop light switch assembly sold in the United States. A similar notification is required to Transport Canada for all impacted vehicles sold in Canada.
Our records indicate that (Company Name) purchased the following suspect SL-4s from Bendix:
| Bendix OE Part Number | Quantity |
| K101993 | XXX |
Additionally, our records indicate (Company name) also purchased the following suspect aftermarket SL-4 stop light switch assemblies through your PDC operations. These parts are also affected by this recall. Please check your inventory. Should you have any of the affected part numbers detailed above in stock, Bendix will work with you to arrange a return or exchange.
| Bendix Aftermarket Part Number | Quantity |
| K101996 | XXX |
| K108141 | XXX |
| K108142 | XXX |
For your convenience, the following is provided to help you in this recall process:
- A list of the affected Bendix SL-4 stop light switch assemblies purchased by your company (by part number); and
- A Bendix SL-4 Identification Guideline to assist you in properly identifying impacted parts
We value our business relationship with you. We regret the inconvenience that may result from these circumstances, and we sincerely appreciate your understanding and cooperation in this matter. If you have any questions or require more information, please do not hesitate to reach out to your Bendix Account Manager directly. You may also contact us via email at SL4campaign21@bendix.com, or by telephone – toll-free – at 1-800-AIR-BRAKE (1-800-247-2725), option 2. Bendix Tech Team representatives are ready to assist you Monday-Thursday, 8:00 a.m. – 6:00 p.m. ET, and Friday 8:00 a.m. – 5:00 p.m. ET.
Sincerely,
William P. Amato
Director – Product Safety, Warranty, and Advanced Quality
Encl.
March X, 2021
Name
Company
Street
City, State, Zip
Dear <Name>:
IMPORTANT SAFETY RECALL – RESPOND IMMEDIATELY
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Bendix Commercial Vehicle Systems LLC (Bendix) has determined that a defect which relates to motor vehicle safety exists in certain Bendix® SL-4™ stop light switch assemblies. The Bendix SL-4 stop light switch is sold outright. Bendix notified the National Highway Traffic Safety Administration (NHTSA) of the start of a voluntary safety recall campaign involving the Bendix SL-4 stop light switch on December 21, 2020. The recall has been assigned number 20E092.
Impacted Product:
This recall affects Bendix® part numbers K101993, K101996, K108141, and K108142 that were manufactured between December 1, 2019 and January 31, 2020, inclusive. It also includes vehicles for which the SL-4 stop light switch was replaced with one of the aforementioned part numbers during the identified timeframe. This recall does not include vehicles with a SL-4 stop light switch manufactured outside the indicated manufacture dates.
Affected Bendix SL-4 stop light switch assemblies manufactured from December 1, 2019 through January 31, 2020, inclusive, are identified by the presence of a date code printed on a white label affixed to the unit. The date code, featuring a “Month/Year” format, will appear in red or black type. For example, an SL-4 assembly manufactured in December of 2019 will have a date code of “12/19;” an assembly manufactured in January of 2020 will have a date code of “01/20.” An SL-4 switch with a date code ranging from “12/19” to 01/20” represents one of the potentially affected units and is included in this recall effort.
Part Numbers for the SL-4 stop light switch supplied to the aftermarket between December 1, 2019 and January 31, 2020, inclusive, include:
| Bendix® Part Number | Description |
| K101993 | Bendix® SL-4™ Stop Light Switch |
| K101996 | Bendix SL-4 Stop Light Switch |
| K108141 | Bendix SL-4 Stop Light Switch |
| K108142 | Bendix SL-4 Stop Light Switch |
Problem Description:
Bendix has determined that a component manufactured at a Bendix sub-supplier was not within specification limits and has led to the defect – improperly formed threads do not provide necessary clamp loads to withstand normal air brake system pressures. This may cause the Bendix® SL-4™ stop light switch to remain in either the open or closed state, resulting in the vehicle stop lamps staying illuminated or failing to extinguish promptly. If the pressure switch is used to control brake lamps, the result of the jammed contacts might be that the brake lights do not illuminate or that the brake lights constantly remain illuminated increasing the likelihood of a crash.
It’s also important to note that the service, parking, and emergency brakes of the vehicle are not affected by this condition. In addition, there is no impact to stopping distance or parking performance of the vehicle if this issue arises.
A leaking switch may make an audible sound that can be detected by the driver during operation or during pretrip inspection. The driver may also notice the brake lights on during pre-trip inspection. A warning light may appear on the vehicle dash. There have been no reports of any injuries or accidents related to this issue.
What You Need To Do:
The Use and/or Sale of Affected Parts
First and foremost, you should immediately stop using and/or selling any of the part numbers previously listed in this letter that were manufactured between December 1, 2019 and January 31, 2020, inclusive. It is a violation of Federal law for a dealer to sell a component that is subject to this recall. Please refer to the information contained within the shaded block on the first page of this letter to help you identify impacted Bendix SL-4 stop light switches.
The chart below displays the affected parts and associated quantities (if applicable) purchased by your company or location:
| Bendix® SL-4™ Stop Light Switch Part Number: K101993 | Bendix SL-4 Stop Light Switch Part Number: K101996 | Bendix SL-4 Stop Light Switch Part Number: K108141 | Bendix SL-4 Stop Light Switch Part Number: K108142 |
Inventory Disposition:
Next, if your current parts inventory contains Bendix SL-4 stop light switches (Bendix® part numbers K101993, K101996, K108141, and K108142) manufactured within the impacted timeframe, please contact Shelly Neff at our Huntington, Indiana, Customer Service Center. Please phone Ms. Neff, toll-free, by calling 1-800-AIR-BRAKE, ext. 4417 (1-800-247-2725, ext. 4417) to arrange for the return of any affected inventory currently in stock. As a reminder, you will need to place an offsetting order to replenish the returned stock.
Please Note: Bendix is advising any end-use customers with potentially affected inventory in stock to return the inventory to the same location of purchase.
For your convenience, the following are included to help you in this recall process:
- a list of the affected Bendix SL-4 stop light switch assemblies and associated quantities (if applicable) purchased by your company by part number/by location; and a
- Technical Bulletin (TCH-006-006) released by Bendix is available on the Product Action Center online at bendix.com for future reference.
Identifying Impacted Vehicle Owners
Finally, in order to conduct as thorough a campaign as possible, Bendix will contact all owners of an affected SL-4™ stop light switch. We need your help to complete this process.
Using a Microsoft® Excel-formatted file, please compile a complete list of impacted customers, including contact names, company or fleet name, as well as their complete addresses and phone number. A sample form – detailing the required column headings – is shown below for your reference. This list is only for this recall. It will enable our personnel to begin notifying vehicle owners immediately.
| Your Company Name: | Contact Person (Name, email and phone) At Your Company If Questions: | |||||||||
| Bendix Part Number: | VIN: | Company/Fleet Name: | Contact Name: | Street Address | City | State/Province | Country | Zip/Postal Code | Phone Number: | Email: |
Return the completed spreadsheet to Bendix within 14 calendar days following receipt of this letter. The list may be sent as an email attachment to us at SL4campaign21@bendix.com (this is our preferred method) or sent via U.S. Mail/Canadian Post to us at this address:
Bendix Commercial Vehicle Systems LLC
Attention: Mr. Kevin Lenhart
901 Cleveland Street
Elyria, OH 44035
Administering the Recall
Bendix is directing vehicle owners with an impacted Bendix® SL-4™ stop light switch to request a replacement switch directly from us. Owners will be instructed as to the steps to take in a separate communication.
How To Contact Us
We want to keep you up to date with the latest developments and information surrounding our Bendix SL-4 stop light switch recall. For updates about this action – including technical questions and ordering information – please direct your comments or questions to the Bendix Tech Team, toll-free, at 1-800-AIR-BRAKE, option 2 (1-800247-2725, option 2). Representatives are available to assist you Monday – Thursday, 8:00 a.m. – 6:00 p.m. ET and Friday, 8:00 a.m. – 5:00 p.m. ET. You may also reach us via email at SL4campaign21@bendix.com.
Once again, we regret any inconvenience this voluntary recall campaign may cause you or your customers. We appreciate your understanding and cooperation in this matter.
Sincerely,
Bendix Commercial Vehicle Systems LLC
Encl.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| BENDIX | SL4 STOP LIGHT SWITCH | |
6 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-20E092-5951.pdf 699.271KB
Loading...
Reload document 
Open in new tab
Remedy Instructions and TSB
RCRIT-20E092-2426.pdf 444.441KB
Loading...
Defect Notice 573 Report
RCLRPT-20E092-1434.PDF 216.699KB
Loading...
Recall Acknowledgement
Loading...
Miscellaneous Document
RMISC-20E092-2767.pdf 270.208KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20E092-7491.pdf 609.187KB
Loading...
Latest Recalls Documents
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
- Fits: 1988-1999 Fullsize Pickup Truck
- Meets or Exceeds DOT & SAE Standards
- Direct OEM Replacement No Modification Needed
- New Aftermarket Part, Includes Both Driver & Passenger Side
- (Set of 2) Important Notice: This type bulbs are for brake lights use, please check OEM bulb's part number to confirm it is 7440 or 7443 before purchasing. Strobe Function: 7443 Strobe led lights bulbs will flash 3 times on-and-off and then keep solid light (Legal blinking times) to avoidthe rear-end collision.
- Due to LED bulbs draw less power than stock incandescent lamps, extra LED resistors maybe required to avoid the flickering or error code. LED Chips: Each 7443 LED strobe bulb is equipped with 39 pieces high quality,high power and high performance 2835 led chips; 360° full angle illumination light ouput with projector lens.
- Universal fits T20 wedge 7440 single filament and 7443 dual filament W3x16Q base, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, center high-mount stop ( 3rd brake ) lights lamps,etc.
- The length is about 2.09 inch. Cross reference number: 7440, 7441, 7443, 7443LL, W21/5W, 7443/26201, 78660, 78661, 17919, 7515, HIB7443WM, W21W, 7440/26200, 17632, 7504, 7440LL, 7443-SRCK, 7443-CK,etc.
- Newly upgraded version, built-in USA-made smart IC driver for the best light performance and longer lifespan. USA located, Fully One Year Warranty. Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24VDC.
- Compatible with:2003 2004 2005 2006 chevy silverado 1500 1500hd,2003 2004 2005 2006 chevy silverado 2500 2500hd,2004 2005 2006 chevy silverado 3500,2007 chevy silverado 1500 2500 3600 classic
- Replace part number:Gm277 B100L,gm277 B100R 19169004 19169005,gm2800174,gm2801174
- Not compatible with: 2003 chevy silverado 3500 hd and stepside beds model.Do not fit barn door or stepside models only fits fleetside models.please confirm the vehicle fitment before ordering
- Multiple tests:Oklpf tail light undergoes temperature,humidity,dust,salt spray and water testing to make your everyday driving safer
- Easy to install:Oklpf tail lights installation process is simple and convenient.It's direct plug and play saving you valuable time and effort
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Key Specs: Voltage DC 12V-24V, 6500K Brilliant Red, Wattage 3w, low power consumption and fast heat dissipation for longer lifespan. The 3157 led light bulbs are compatible with 3056 3156 3157 3157K 3057R 4057 4157 etc.
- High Quality: iFunyLed 3157 led lights use high quality LED chips and circuit boards, built-in intelligent IC driver, hardly delaying or flickering, bulb life up to 50,000 hours.
- Wide Applicability: iFunyLED 3157 Red LED bulbs can used as brake lights, tail lights, turn signal lights, daytime running lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights. Easy to install, just plug and play.
- 300% Brighter: Our 3157 bulb has 54 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot.
- Professional Service: Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the 3157 led bulb. Delivering 360° high luminous efficiency with full brilliant red light, more visible when braking
- 5.5W per 3157 red bulb. Only 1/4 energy consumption of original bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Electroplating process housing. Improve oxidation resistance and produce less heat. High-grade shape, matching great in the assembly. Ideal replacement for your halogen bulbs
- Small size comparable to OEM bulbs. Non-polarity, applied to US standard and CK sockets. Can be used for turn signal bulb, side marker light bulb, blinker light bulb, parking lights, etc. Fits: 3056 3156 3157 3157K 3057R 4057 4157, etc.
- Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your owner manual to confirm or ask a question for help
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- Twice The Life Of Standard Incandescent Bulbs
- Philips Offers A Wide Range Of Smart Light Bulbs, Lamps, Fixtures And Accessories
- Original Equipment Quality Seal For The Most Reliable Performance
- Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Bulbs Dim Over Time
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.