21E060 Cummins L9 Diesel Engines Excessive Ammonia in Tailpipe Exhaust

June 29, 2021 NHTSA CAMPAIGN NUMBER: 21E060000

Excessive Ammonia in Tailpipe Exhaust

Exposure to high levels of ammonia can increase the risk of injury.

 

NHTSA Campaign Number: 21E060

Manufacturer Cummins, Inc.

Components ENGINE AND ENGINE COOLING

Potential Number of Units Affected 477

 

Summary

Cummins, Inc. (Cummins) is recalling certain L9 Diesel Engines, with part number D563027BX03. The engine calibration software’s management of the injection of Diesel Exhaust Fluid can allow excessive ammonia into the tailpipe exhaust.

 

Remedy

Dealers will recalibrate the engine, free of charge. Owner notification letters were mailed August 20, 2021. Owners may contact Cummins customer service at 1-800-286-6467.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

---

*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 21E060
Cummins Campaign #C2460

 

August 20, 2021

 

Dear Cummins Customer:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.  Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins L9 engines manufactured between September 24, 2018 and June 22, 2021 and installed in transit buses.

This notice applies to your engine(s)/vehicle(s) listed on the enclosed table.

 

WHAT IS THE PROBLEM?

Under certain conditions, the engine tailpipe exhaust may intermittently contain excessive ammonia.  Persons around the vehicle may smell ammonia.  Exposure to ammonia at elevated concentrations may cause personal injury.

 

WHAT ARE WE DOING ABOUT THE PROBLEM?

Cummins has released field Safety Campaign #C2460 L9 MY21 Transit Bus Calibration Safety Campaign to correct this condition by recalibrating the Engine Control Module.  This campaign is currently available at Cummins Distributors and authorized Warranty Dealers. The repair will be completed free of charge and most applications will require approximately 1 hour to complete.

 

WHAT SHOULD YOU DO?

Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine.  The distributor or dealer will work with you to schedule the best date to complete this repair.

In the meantime, Cummins advises you to avoid running the engine in confined spaces, such as in a service garage bay, without adequately venting the vehicle’s exhaust.

Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days.  Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.

If you previously paid to have this recall performed on your vehicle, you may be eligible for reimbursement.  Please contact Cummins Care at the number below for more information.

 

WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?

If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer.  You may also contact Cummins Care at 1-800CUMMINS (1-800-286-6467), or visit our website at care.cummins.com.

If you have a complaint relative to this recall, you may report it to the following:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE Washington, DC 20590

 

You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.

 

If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo.

 

If you are no longer the owner of the engine(s) or vehicle(s) listed on the enclosed table, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.

 

Cummins is taking this action in the interest of safety and satisfaction with our products.  We apologize for any inconvenience and thank you for your attention to this matter.

 

Sincerely,

 

Campaign Administrator Cummins Inc.

 

---

A CUMMINS FIELD CAMPAIGN

Please Deliver To: Service Managers and Warranty Decision Makers

FROM: Cummins Global Warranty Administration Communications

Subject: L9 MY21 Transit Bus Calibration Safety Campaign

Number: C2460

Date: 27-Jul-2021

Expires:
15-Jul-2051 (U.S./Canada)
15-Jul-2051 (International)

Attention:
Worldwide distr./ branches and Div./Reg Offices
U.S. / Canadian Distr./Branches and Div. Offices
U.S. / Canadian Dealers (Automotive)

If additional information is required, please contact your Cummins Warranty Operations Group Leader.

 

DESCRIPTION:

This Safety Campaign is being issued to address the potential for excessive ammonia in the engine tailpipe exhaust. Exposure to ammonia at elevated concentrations may cause personal injury. This Safety Campaign authorizes certified repair locations to recalibrate the engine control module (ECM).

 

NOTE: This field action provides retroactive coverage for repairs made in anticipation of and prior to the release of this publication.

 

ACTION:

In order to qualify for repair under this field action, an engine:

1. will be covered Regardless of coverage status, and
2. must show as OPEN on QuickServe® Online for this field action.

 

NOTE: The ESN list is attached for reference.

 

After verifying that the engine meets the above requirements, perform the following actions:

1. Use the ECM Calibration Revision History available on QuickServe® Online to confirm the revision date of the calibration currently installed in the engine. If ECM already contains the most recent calibration revision, DO NOT recalibrate the engine, no further action is needed. File a claim for Admin and 17-902 Campaign Check to close the eligibility of the engine.
2. If a previous calibration revision is installed, download the latest calibration available on QuickServe® Online. Use the calibration revision history date to identify the latest calibration revision available. Please refer to Procedure 019-032 in the appropriate Service Manual.

 

NOTE: Certified repair locations outside of California, who elect to perform this campaign on engines installed in vehicles which are registered in the state of California, are authorized to do so if they have the two items noted below in their inventory. Please note that the Label, Authorized Change and the Proof of Correction Form must be ordered through standard parts processes. They are not available on QuickServe® Online.

3. If applicable, a Label Authorized Change, Cummins part number 5297400, must be filled out per the attachment. Clearly print or type ECM RECALIBRATION in the center box. Fill in the Campaign Number, Distributor or Dealer Code, and Date information. Peel off the backing material and install the label on the engine valve cover near the engine data plate. There is a clear protective cover on this label; peel the backing off of this cover and push the clear cover over the printed material. This will help protect the label during engine operation. Label cost and appropriate SRT time can be claimed per Campaign guidelines.

 

4. If applicable, an Emissions Campaign – Proof of Correction form, Bulletin # 4310621, must be filled out and provided to the Customer. Inform the Customer to retain this certificate as proof that the Emissions Campaign has been performed. This form may be required as proof of an Emissions Campaign by the State of California, for vehicles registered in that state, the next time the vehicle registration is renewed. Form cost and appropriate SRT time can be claimed per the Campaign guidelines.

 

5. File one claim for the listed parts and required labor associated with this repair. Again, SRT 17-902 should ONLY be claimed if the unit DID NOT require calibration.

 

MATERIAL DISPOSITION:

Materials removed as a result of this field action must be scrapped.

 

REIMBURSEMENTS:

Parts:

NOTE: All parts listed are OPTIONAL. Claim only the parts required to complete the repair.

The following parts are covered under this field action:

Part Number	Quantity	Description
388639600	1	LIT,ELE (FLEET COUNT OPTIONAL)
431062100	1	LIT,SER (PROOF OF CORRECTION – OPTIONAL)
529740000	1	TAG (LABEL, AUTHORIZED CHANGE – OPTIONAL)

 

NOTE: SRTs to gain access that are required to complete the repair, that are sufficiently explained in the claim narrative, may also be claimed on this action.

NOTE: SRTs listed are OPTIONAL. Select ONLY the appropriate SRTs for the repair performed. SRTs to gain access that are required to complete the repair, that are sufficiently explained in the claim narrative, may also be claimed on this action.

NOTE: Select the appropriate OPTIONAL SRT for the repair performed. Claim either SRT 19-0G5, 17-901 and Admin should be claimed if the unit DID require calibration. SRT 17-902 and Admin should only be claimed if the unit DID NOT require calibration.

 

Labor using applicable Access Code and Time:

SRT Code	Description	Time
00-90X	Administrative time
17-901	Stamp Engine Data Plate/Apply Emission Sticker (OPTIONAL)
17-902	Campaign/ATC Check (OPTIONAL)
19-0G5	Engine Control Module Calibration Code – Transfer (CMI) (OPTIONAL)

 

Travel:

Travel is covered under this field action. Towing is not covered under this field action.

NOTE: Please schedule the Technicians time to maximize the number of units that can be repaired on a single visit. When filing claims for multiple ESNs, where travel or towing is required, travel or towing can be filed to ONLY one (1) ESN.

 

Other Claimables:

Consumables are not covered under this field action.

 

Claim Instructions:

For Cummins Dealers, claims for this Field Campaign must be filed via RAPIDSERVE™ Web (rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the “Warranty” tab in QuickServe® Online. If there are additional questions, please contact your local Cummins Distributor.

Account Code:	65
Pay Code:	North America Distributor = X
Pay Code:	North America Dealer = D
Pay Code:	International Distributor = I
Pay Code:	International Dealer = R
Failure Code:	WEQPEP

 

Attachments

c2460_esn-list.xlsx

 

---

*** IMPORTANT SAFETY RECALL ***
NHTSA Recall No. 21E-060

 

July 02, 2021

 

New Flyer Industries
711 Kernaghan Avenue
Winnipeg, MB R2C 3T4

 

Dear Cummins OEM Customer:

 

We are writing to inform you that Cummins Inc. has determined that a safety-related defect exists in certain EPA MY 2021 L9 engines that were manufactured between September 24, 2018 and June 22, 2021. Cummins has initiated a recall of the subject engines. Our records indicate that some of these engines have been shipped to you.

 

A copy of Cummins’ initial Part 573 Defect Notification report is enclosed. This notification was submitted to the National Highway Traffic Safety Administration (NHTSA) on June 29, 2021. As more fully described in the Defect Notification, the engine tailpipe exhaust may intermittently contain excessive ammonia, which may increase the risk of personal injury.

 

Enclosed is a list of Engine Serial Numbers for affected engines that our records indicate were shipped to your plants. For engines installed in vehicles that have left your control, we encourage you to make a safety defect determination in accordance with 49 USC 30118 et seq. and, as appropriate, to submit a Defect Notification to NHTSA in accordance with 49 CFR Part 573 Cummins will conduct the recall, including notifying owners pursuant to 49 CFR Part 577, performing the remedy, and submitting quarterly status reports to NHTSA. Cummins is requesting that you provide the associated vehicle model identification, VINs and owner contact information to facilitate owner notification. Please work with your Cummins account team leader to ensure that the requested information is provided to Cummins as soon as possible.

 

Cummins is finalizing the remedy (a new calibration) to address this condition. Availability of this calibration and Cummins’ plan for support to update engines/vehicles still in your inventory will be communicated separately. Please contact your Cummins OEM Customer Quality representative for more information. Please note that Federal law prohibits delivery of these engines, or vehicles equipped with these engines, under a sale or lease until this condition has been remedied.

 

Cummins will conduct a safety campaign to remedy the issue with a new engine calibration.

 

Cummins apologizes for this inconvenience, but we are initiating this action in the interest of our customers’ safety and satisfaction with our products. Thank you for your assistance.

 

Please confirm receipt of this communication.

 

Sincerely,

 

OEM Account Manager

 

Cummins Inc.
500 Jackson St
Columbus, Indiana 47201

 

Enclosures:

1. Cummins Part 573 Defect Notification
2. List of Engine Serial

 

Cummins Inc.
500 Jackson Street, MC 60621
Columbus, IN 47201 USA

 

---

1 Affected Product

Equipment

BRAND	PART NO.	PRODUCTION DATES
CUMMINS	L9

 

---

10 Associated Documents

Defect Notice 573 Report

RCLRPT-21E060-6616.PDF 215.504KB

 

---

Recall Acknowledgement

RCAK-21E060-8023.pdf 702.682KB

 

---

Remedy Instructions and TSB

RCRIT-21E060-8656.pdf 66.132KB

 

---

Recall 573 Report – Amendment 1

RCLRPT-21E060-7720.PDF 217.836KB

 

---

Manufacturer Notices(to Dealers,etc)

RCMN-21E060-9189.pdf 42.776KB

 

---

Recall Quarterly Report #1, 2021-3

RCLQRT-21E060-3734.PDF 211.12KB

 

---

Recall 573 Report – Amendment 2

RCLRPT-21E060-9563.PDF 217.904KB

 

---

Recall Quarterly Report #2, 2021-4

RCLQRT-21E060-4840.PDF 211.224KB

 

---

Miscellaneous Document – 2021-3 Quarterly Report Supplemental

RMISC-21E060-3778.pdf 193.772KB

 

---

ISSUED Owner Notification Letter(Part 577)

RCONL-21E060-9289.pdf 407.733KB

 

---

Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21E060&docType=RCL

 

---

 

Heavy Duty Truck Reprogramming

Description:

Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.

Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.

 

The USB-Link™ 3 comes with the following:

• Latching USB Cable (PN 404032)

• 9-Pin Deutsch Adapter, 1 Meter (PN 493128)

• J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)

The USB-Link™ 3: Wireless is also available (PN 121052).

 

Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1708
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud

Windows® Vehicle Communication API
Windows® Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)

Operating System Compatibility
iOS
Android™
Windows® 10, 11

Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetooth® 2.1 + EDR
Wi-Fi (dual band)

Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
VCAD Elite Mack/Volvo
V-MAC Service Tools
Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International ABS
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4

 

121052

121054

 

---

Daimler Truck

DiagnosticLink Order Site:

DiagnosticLink Direct Link:

https://diagnosticlink.nexiq.com/DTNA/Default.aspx

 

---

 

This product presentation was made with AAWP plugin.