2019 Trail King TK80ACS & TK80AACS Trailers Rear Sliding Axle Suspension Beams May Crack

September 14, 2021 NHTSA CAMPAIGN NUMBER: 21V713000

Rear Sliding Axle Suspension Beams May Crack

A cracked suspension beam may come loose or detach from the frame bracket, increasing the risk of a crash.

 

NHTSA Campaign Number: 21V713

Manufacturer Trail KingeBay logo Industries, Inc.

Components SUSPENSION

Potential Number of Units Affected 14

 

Summary

Trail KingeBay logo Industries, Inc. (Trail KingeBay logo) is recalling certain 2019 TK80ACS and TK80AACS trailers. The rear sliding axle suspension beams may contact a frame reinforcement, causing cracking in the suspension beam.

 

Remedy

Dealers will replace any suspension beams that show indications of cracking, and will also replace all of the frame reinforcements, free of charge. Owner notification letters were mailed on October 6, 2021. Owners may contact Trail KingeBay logo’s customer service at 1-800-843-3324. Trail KingeBay logo’s number for this recall is TK202104.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Trail King Industries
Trail King Industries

 


Trail KingeBay logo has determined that a defect which relates to motor vehicle safety exists in rear axle slide pan and suspension beams on certain TK80ACS and TK80AACS trailers. Only trailers with manufacture dates from August 2018 through October 2018 are affected.

 

What Trailers are being recalled? 

This recall affects Trail KingeBay logo TK80ACS and TK80AACS 2019 model years that have manufacture dates August 2018 through October 2018.

 

What is the Problem?

During normal operation of the trailer, the rear sliding axle suspension beams can make contact with a frame reinforcement that is located directly above.  Over time, the vehicle may experience cracking in the suspension beams in the location where the beams make contact with the frame reinforcements. If the cracks in the suspension beam continue to develop and are not addressed, the cracks could propagate and allow the suspension beam to come loose or fully detach from the frame bracket, increasing the potential for a crash.

 

What should you do?

Obtain and confirm your trailer’s serial number from the VIN plate located on the driver’s side of the upper deck. You are receiving this letter because our records show you are the current owner of this vehicle.

A Trail KingeBay logo dealer will inspect the suspension beams and frame reinforcement. If there are signs of cracking, the trailer will need to be taken out of service until the repair can be completed. Please contact your nearest Trail KingeBay logo Industries dealer to have your trailer inspected and repaired. You also can contact Trail KingeBay logo Industries directly at 1-800-843-3324 and our Customer Service Department will help you locate a dealer near you. We will send the parts needed to the dealer to repair your trailer.

 

What will we do?

Trail KingeBay logo Industries is conducting a safety recall campaign to address this issue. An authorized Trail KingeBay logo Industries Service Center will inspect and repair the suspension beams and frame reinforcement on your trailer. These repairs should take approximately 10 hours and will be performed at no charge to you.

 

If this repair has been performed prior to receipt of this notification, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information, contact Trail KingeBay logo at the phone number noted below.

 

If you no longer own the vehicle covered by this Safety Recall Notice, please provide the name and contact information for the new owner by contacting Trail KingeBay logo Industries at 1-800-843-3324 and ask for Customer Service or email to [email protected]. This will enable us to advise the new owner of this recall.

 

Pursuant to Federal Law, any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.

 

If Trail KingeBay logo Industries fails or is unable to provide a remedy within a reasonable time, you may wish to contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800424-9153); or contact NHTSA at https://www.safercar.gov.

 

We regret any inconvenience this may cause you, but we are initiating this action in the interest of your personal safety and satisfaction with our products.

 

Sincerely,

Customer Service

 

Trail KingeBay logo Industries
300 East Norway
Mitchell, SD 57301
1-800-843-3324 (Toll Free)

 


2 Affected Products

Vehicles

MAKEMODELYEAR
TRAIL KINGeBay logoAACS2019
TRAIL KINGeBay logoACS2019

 


9 Associated Documents

Recall Quarterly Report #1, 2021-4

RCLQRT-21V713-7183.PDF 211.142KB

 


Recall 573 Report- Amendment 1

RCLRPT-21V713-6109.PDF 213.8KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V713-0647.pdf 135.272KB

 


Manufacturer Reimbursement Plan

RMRP-21V713-9755.pdf 157.173KB

 


Defect Notice 573 Report

RCLRPT-21V713-6996.PDF 213.759KB

 


Recall Acknowledgement

RCAK-21V713-8984.pdf 646.198KB

 


Recall Quarterly Report #2, 2022-1

RCLQRT-21V713-0034.PDF 211.244KB

 


Recall 573 Report – December 2, 2021

RCLRPT-21V713-3555.PDF 214.069KB

 


Recall Quarterly Report #3, 2022-2

RCLQRT-21V713-4834.PDF 211.326KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
YESWELDER 135A MIG Welder, 110V Flux Core Gasless MIG/Lift TIG/Stick 3-in-1
  • READY OUT OF THE BOX: Start welding immediately! It masterfully handles Gasless Flux Core MIG, Stick, and Lift TIG (Extra Lift TIG torch required). This budget-friendly 3-in-1 machine includes extra E71T-GS .030''&.035'' flux core wires, known for its smooth arc and high feedability. Say goodbye to heavy shielding gas cylinders—perfect for outdoor, windy, or all-position welding.
  • SAY GOODBYE TO BURN-THROUGHS: Unlike rigid auto-welders, our upgraded Synergic Control automatically matches the recommended voltage to your wire feed speed, making it foolproof for beginners. Plus, the ±3V voltage micro-adjustment allows seasoned professionals to fine-tune the arc. This precise control is the ultimate solution for tackling thin auto body panels without burning through.
  • CRYSTAL-CLEAR LED DISPLAY: Never squint at your welder's settings again. Our advanced, oversized digital display revolutionizes the visual interface, offering enhanced clarity even in bright outdoor environments. Monitor real-time current during operation for precise control over every weld.
  • ROBUST POWER YET ULTRA-PORTABLE: Weighing only 11.4 lbs with a convenient carrying handle, it's the perfect on-the-go companion. Delivering a robust 135A output (110V), it effortlessly tackles mild steel up to 3/32" (2.5mm) thick. Engineered with an upgraded drive system for smooth wire feeding to prevent annoying jams.
  • SAFETY PRIORITIZED & STABLE ARC: The machine features comprehensive built-in safeguards, including robust protections against over-current, over-load, and over-heating, guaranteeing unparalleled user safety, device longevity, and fewer circuit interruptions.
SaleBestseller No. 2
YESWELDER 160A MIG Welder, 110V/220V MIG/Flux Core/Lift TIG/Stick
  • MULTIFUNCTIONAL: A 4-in-1 welder, capable of Flux Core MIG/Gas MIG/ Stick/Lift TIG (need to purchase extra tig lift torch). This unit caters to a wide range of welding applications and meets your various welding needs.
  • WELDING CAPACITY: With a robust 160A output, 110V/220V dual voltage, this welder is in possess of reliable quality and stable performance. It's widely used in various scenarios, including automotive, construction, fabrication and DIY. This Welder can work with 2LB and 10LB spools of .030"(0.8mm) and .035" (0.9mm) solid core wire, flux core wire. It also performs well with most 6010, 6011, 6013 and 7018 rods in Stick Welding mode.
  • SMART CONTROL: Smart control refers to Synergic control, when selecting different thicknesses or adjust the amperage, the recommend voltage and wire feeding speed will be automatically switched into. Great choice for beginners.
  • MANUAL CONTROL: You can manually adjust the wire feeding speed and voltage according to your preferences, which is ideal for seasoned professionals and DIYers.
  • LED DISPLAY: Advanced LED digital display, subverts the traditional visual experience, increases the visual clarity and improves the efficiency of the operation.
SaleBestseller No. 3
YESWELDER 205A MIG Welder, 110V/220V 5-In-1 MIG/Flux Core MIG/Spool Gun MIG/Lift TIG/Stick
  • 5 IN 1 MULTIFUNCTIONAL: The MIG-205DS PRO is capable of Gas MIG/Flux Core MIG/Spool Gun Aluminum MIG/Lift TIG/Stick. (additional lift TIG torch required and spool gun required). This unit caters to a wide range of welding applications and meets your various welding needs.
  • WELDING CAPACITY: With a robust 200 Amp output, 110V/220V dual voltage, this welder is in possession of reliable quality and stable performance. It's widely used in various scenarios, including automotive, construction, fabrication and DIY. It's suitable for welding thin and thick materials, such as steel, aluminum, and stainless steel.
  • SYNERGIC&MANUAL MIG: The wire feeding speed is flexibly adjustable(Min:58 in/min; Max:858 in/min), when adjusting the wire feeding speed, the voltage will be automatically matched to a recommended value, and you can fine tune the voltage between -3V~3V. Great choice for beginners. You can also manually adjust the wire feeding speed and voltage according to your preferences, which is ideal for seasoned professionals.
  • DIGITAL DISPLAY: The advanced digital display revolutionizes the welding interface, offering enhanced clarity and operational efficiency. Monitor the real-time current during welding for precise control.
  • SAFETY PRIORITIZED: Our product features comprehensive safeguards, including automatic compensation for voltage fluctuation, robust protections against over-current, over-load, and over-heating, ensuring unparalleled user safety and device longevity.
SaleBestseller No. 4
ARCCAPTAIN 165A MIG Welder 110V 220V 4-in-1 Gasless Gas MIG Stick Lift TIG
261 Reviews
ARCCAPTAIN 165A MIG Welder 110V 220V 4-in-1 Gasless Gas MIG Stick Lift TIG
  • 4-IN-1 MIG Welder: The welder machine offers GAS MIG/Flux Core MIG/Lift TIG/ MMA welding modes (Note: WP-17V TIG torch must be purchased separately). It can easily handle welding stainless steel, carbon steel, and even thicker steel materials, meeting diverse welding requirements.
  • TECHNICAL UPGRADE: This welding machine features upgraded MCU and IGBT technologies, enabling users to precisely adjust parameters for Synergy MIG (plate thickness, voltage, welding speed), Manual MIG (current, voltage), and MMA (hot start, arc force, etc.) while its dual-voltage design (110V/220V) supports flexible power switching (Caution: Ensure the screen is off and the fan has stopped before changing voltage settings).
  • LARGE LED DISPLAY: With an exclusive human-computer interaction LED screen design, this welder provides accurate data display, allowing you to read it more easily and clearly without removing your helmet. This welder also has 2T/4T functions, which can seamlessly switch between continuous welding (4T) for long-term operations and trigger-controlled precision welding (2T) for fine operations, improving efficiency and flexibility.
  • HIGH PERFORMANCE: The output current up to 165A, rated duty cycle: 60%, equipped with an upgraded cooling fan, the heat dissipation performance is improved by 30%, and can easily complete various welding tasks. This welder is capable of tackling mild steel workpieces up to 3/16” thick.
  • SAFETY PROTECTION: The 165A MIG welder Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
Bestseller No. 5
Futelo 145A MIG Welder, 110V 3-in-1 Flux Core Stick Lift TIG, 7.5 lb
171 Reviews
Futelo 145A MIG Welder, 110V 3-in-1 Flux Core Stick Lift TIG, 7.5 lb
  • 【3-IN-1 WELDER】Compact 3 in 1 welder combines MIG welder, Stick, and Lift TIG welding machine functions to tackle a wide range of welding tasks. With 30–145A output and support for carbon and stainless steel (1–5mm), it’s ideal for home DIY, repairs, and outdoor metal work. (NOTE: TIG torch not included—please purchase separately)
  • 【COMPACT & PORTABLE】This little welder machine 110V packs big power into just 7.5 lbs. Easy to carry with one hand, it’s perfect for your garage, yard, or job site. Don’t let its small size fool you—this compact welding machine delivers strong, reliable welds wherever you need them
  • 【SMART SYNERGIC CONTROL】Perfect for beginners! Just set your wire diameter (.030"/.035") or amperage (30-145A)—the welder machine auto-adjusts voltage and wire speed. It even suggests metal thickness! Start welding like a pro, even if it’s your first time
  • 【CLEAR LED DISPLAY】The bright digital screen shows real-time welding amperage and wire diameter, so you can monitor and adjust settings on your mig welder 110V without removing your mask. Intuitive and easy to use, it ensures consistent, high-quality welds—perfect for both experienced welders and weekend DIYers
  • 【WHAT YOU WILL GET】Everything you need is in one box! Includes: 1*145A MIG welder 110V, 1*14AK MIG torch, 1* Ground clamp, 1*Electrode holder, 5* 2.5" Welding rods, 1*0.9mm flux core wire, 2* Contact tips, 1* Wrench, 1* Safety goggles, 1*Pair of gloves, 1*Hammer and 1* User manual. Plug it in and start your first project within minutes—no extra purchases required

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...