“This site contains affiliate links for which OEMDTC may be compensated” |
October 15, 2021 NHTSA CAMPAIGN NUMBER: 21V810000
Improperly Crimped Lifting Cable
An improperly crimped cable may come out of place during a lifting operation, possibly causing the generator set to fall, increasing the risk of injury.
NHTSA Campaign Number: 21V810
Manufacturer Smeal Holding, LLC
Components EQUIPMENT
Potential Number of Units Affected 1
Summary
Smeal Holding, LLC (Smeal) is recalling one 2021 Pumper Fire Apparatus fire truck equipped with a Cummins generator set. The lifting cables may be improperly crimped.
Remedy
Cummins will inspect the lifting cable, and either replace the cable or install a warning label, free of charge. Owner notification letters are expected to be mailed on November 12, 2021. Owners may contact Smeal’s customer service at 1-800-867-6478. Smeal’s number for this recall is 21015.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On 9-22-2021, REV was notified by Cummins of an equipment recall 21E-075 they issued and that Smeal was sent one affected product. Between 9-22-2021 through 9-30-2021, Spartan Fire
and REV worked with Cummins
to identify the affected population by purchase order and shipping date.
On 10-1-2021, Spartan Fire escalated the issue to REV Group Management..
On 10-12-2021, REV Group Management approved an involuntary recall for this issue.
21E075 Cummins
Generator Lifting Cable
21E075 Cummins Generator Lifting Cable
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SMEAL | PUMPER | 2021 |
9 Associated Documents
Defect Notice 573 Report
RCLRPT-21V810-7073.PDF 213.715KB
Recall Acknowledgement
RCAK-21V810-8647.pdf 645.966KB
Owner Notification Letter(Part 577) w/NHTSA edits
RCONL-21V810-3032.pdf 220.336KB
Recall 573 Report: December 1, 2021
RCLRPT-21V810-9043.PDF 213.722KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V810-1445.PDF 211.126KB
Recall 573 Report- 03/04/2022
RCLRPT-21V810-2464.PDF 213.708KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V810-6640.PDF 211.223KB
Recall Quarterly Report #3, 2022-2
RCLQRT-21V810-7462.PDF 211.303KB
Recall Quarterly Report #4, 2022-3
RCLQRT-21V810-1429.PDF 211.407KB
Latest Recalls Documents
“This site contains affiliate links for which OEMDTC may be compensated” |
- Comprehensive Die Set: Includes nine pairs of EDM wire cutting processed chromed hexagonal rotary dies; 12, 10, 8, 6, 4, 2, 1/0, 2/0 AWG, and 1/8" for stainless steel wire rope
- Innovative Design: The crimper with heavy and thick forged duty head which has higher strength; die slot embedded magnet design to avoid dies from falling off and wobble
- Product Specifications: Designed to crimp ranging from 12 AWG to 2/0 AWG, with a 0.45 inch stroke
- Versatile Applications: Ideal for crimping battery and welding cables, power wires, and electrical cables, with a 180° rotating head for working in tight spaces
- Comfortable Grip: Prolonged use is provided by Vinyl-dipped handles; a return spring for one-handed operation
- 【CRIMPING RANGE AND CUTTING RANGE】: Crimping range 12 AWG-2/0 AWG, Max. Cutting 2/0 AWG
- 【MOLD INCLUDE】: Including 9 pairs of the largest hexagon crimping dies (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)(1/8 "for stainless steel wire rope)
- 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working
- 【Improve】 Innovative collet structure: 1.Increase the mold guide, the mold will not shake left and right. 2.Combined with the overall quenching technology, the pliers head is strong and will not break. Innovative handle return spring: One hand can operate both handles. Compared to products without return springs, it is easier to operate the handle with one hand, and one person can complete the crimping job independently.
- 【Can't cut wire rope】This set includes a cable scissors. Scissors are only suitable for cutting copper or aluminum cables.
- ☀【RELIABLE QUALITY】The Crimper is Made of heavy duty stainless steel for maximum corrosion resistance to be preserved by sea water corrosion or occasional inappropriate and rust.
- ☀【WIDE APPLICATION】4 Crimping Positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm. It can easily crimp copper / aluminum sleeve and more from 50-450 lb test line.Crimping tool coordinate with barrel ferrule can be widely used for wire rope, cable line dog leashes and etc
- ☀【CONVENIENT】 The 2 hardened steel side cutters work with the spring which loaded handle. It helps you cut the wire without frays and the strong spring open the cutters instead by your hands.More convenient than a separate tool.
- ☀【COMFORTABLE】Cushioned non-slip grips and Feature a Safety lock: The stainless grips wrapped with the non-slip cushioned and comes with a safety lanyard. The safety lock is easy way to keep your crimper closed.
- ☀【4Sizes160Pcs Barrel Ferrule and 10Pcs Steel Thimble Kit】: 4size of M1 ,M1.2, M1.5, M2, total 160pcs crimping loop sleeve in a package, Made of high quality aluminum, anti-corrosion and durable.10pcs M2 steel thimble,meet your different needs and easy to use, without effort, just lock both ends of the guide wire by vise, pliers or compression tools. They are great to work on assorted sizes stainless steel cable array for deck railing.
- EASY USE TIP: Loading connector & cable then crimps with the aid of hammer.Recommend 2 to 4 lb sledgehammer,with a bigger hammer you don't have to hit it as many times.Also works well in a shop vise.
- Crimping Type: Indent. Terminal Type: Uninsulated.
- WIRE GAUGE: Crimps 8 gauge to 4/0 gauge connectors.8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 0 AWG, 00 AWG, 000 AWG, 0000 AWG.
- PROFESSIONAL CRIMP: Ideal for battery and welding cables.
- Perfect as a Father's Day Gifts or Birthday Gifts for Fathers, Husbands, DIYer.
- Excellent Quality: The YUZES hydraulic wire crimper tool is made of durable materials with high strength and good toughness. Combined with overall quenching technology, the pliers head is strong and will not break. The dies are made of hardened steel with a chrome finish and crimp stainless steel fitting terminals more tightly.
- Extra Dies: The hydraulic crimper tool kit includes 9 pairs of hexagonal crimping dies for 12, 10, 8, 6, 4, 2, 1/0, and 2/0 AWG, suitable for crimping battery cables and electrical lugs, as well as a 1/8" die for cable railing.
- Heavy Duty Battery Crimping Tool: The hydraulic cable crimping tool can be used for car battery cables, welding cables, electrical cables, power wires, terminal lugs, etc. Additionally, the battery cable crimping tool can be rotated 180° freely to facilitate working in narrow spaces.
- One-Handed Operation: Our battery cable lug crimping tool offers easy one-handed operation with a pressure On-Off control and an innovative handle return spring. After completing the clamping process, simply release the button, and the crimping tool will auto-release.
- 【Complete Kit】- You will get a battery cable wire lug crimping tool, a cable cutter, 170pcs copper ring terminal block, 210pcs heat shrinkable tube, the size and quantity are complete to meet your various needs.
- 【10-1/0 Lug Crimper】- Professional cable terminal crimping tools are 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (similar to AWG 10, 8, 5, 3, 2, 0). It uses high-precision jaws to ensure a tight connection after crimping.
- 【Electrolytic Grade Copper】- All ring terminals are made of electrolytic grade copper to achieve maximum conductivity. The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable.
- 【Labor-saving Crimping】- The handle of the crimping device is up to 10" long and is wrapped with soft rubber. The ergonomic lever structure design can increase friction and make you more labor-saving when crimping.
- 【Heat Shrinkable Tube】- The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable.
- [Large Wire Crimper] Our large HX-50BI battery cable ring terminal crimper is designed to securely connect cables, electrical devices, and other power mechanisms in harshduty scenarios by crimping 8, 6, 4, 2, 1, and 1/0 gauge battery lugs.
- [Rotating Die Set] Compared to stamped dies, EDM cutting dies are more dimensionally accurate and reduce incorrect crimps. Rotating die is compact for quick die changes. When size coded crimping done correctly, the connector will have the die code number embossed on it so that it can be quickly checked to see if the right die and connection were used.
- [Hex-Crimping] A strong mechanical connection is made via hexagonal crimping, which produces a wide area of high pressure contact between the cable and connector, leading to low resistance and high pull-out values.
- [Where to Use] You can use it in commercial vehicles include emergency vehicles, generator sets (Gensets), recreational vehicles, trucks, cranes, and lifting equipment.
- [Cable Cutter] Our LK-60A Cable Cutter is made of chrome vanadium steel for maximum strength and durability, with beveled cutting edges and induction-hardened. It can easily cut through copper and aluminum cable up to 1/0 AWG with a sheartype jaw and not intended for use with steel or ACSR cable.
- IWS-1608M including 4 crimping positions from 3/64-inch to 1/8-inch, for aluminium oval and double sleeves, annealed copper sleeves.
- High-carbon steel material, heat-treated and polished jaw ensures tight and clean compression, improves durability for long-time use with rust protection.
- Ergonomic handles with non-slip grips bring extra power transmission, comfort to use with less effort.
- Well worth crimping tool with sloid construction, crimping force adjusted in the factory, and it can be adjusted after hundreds of times use.
- Specialized tool for DIY enthusiast or a professional, recommend a 2-handed use with the body strength or somewhere you can lean against.
- [Crimp Range] This kit can crimp 12 AWG to 2/0 AWG wires and 1/8" stainless steel wire ropes, outputting 80KN crimping force
- 【Versatile Die Selection】Includes 9 pairs of dies (12, 10, 8, 6, 4, 2, 1/0, 2/0 AWG, and 1/8" for stainless steel wire rope) to cover all your needs, from battery and welding cables to power and electrical cables, providing the flexibility to tackle any job.
- 【Ergonomically Designed for Comfort】Featuring vinyl-dipped grips, the tool offers a comfortable, non-slip hold, reducing hand fatigue for longer periods of work. Ideal for professionals and DIY enthusiasts alike.
- 【Easy to Operate】This tool allows for quick and effortless die changes, simplifying the crimping process.
- 【Flexible in Tight Spaces】With a head that can rotate 180°, this crimping tool adapts to work in narrow spaces, ensuring you can execute precise crimps in any situation, making it a must-have for complex installations and repairs.
- Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.45 Inch
- Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope
- 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working
- 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip. The handle has a return spring for one-handed operation
- 【Easy operation】The mold can be easily replaced by one-way fixed latch
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Spartan Fire, LLC IMPORTANT SAFETY RECALL – 21V-810 This notice applies to the vehicle identification number below. 4S9AEEUB7MS Gastonia Fire Dept, City of PO Box 1748 Gastonia NC 28053 Dear Valued Customer, This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Spartan Fire
, LLC has decided that a defect which relates to motor vehicle safety exists in a certain 2021 model year Smeal Pumper Fire Apparatus equipped with a Cummins
genset lifting cable model 10RBAB. Please note: The Vehicle Identification Number that may be affected by this recall is located at the top of this letter. What is the defect? On the affected vehicle, the genset is equipped with a lifting cable to be used during product assembly or installation. The ferrule on the genset lifting cable may have been improperly crimped by the supplier. The lifting cable may pull out of the ferrule during lifting operation, which may cause the genset to fall during assembly or installation, possible resulting in personal injury. The issue could occur without warning. Corrective Action: Cummins
will instruct you to take your vehicle to a Cummins
authorized service center to inspect the lifting cable crimping for adequacy. If adequate, providing a warning to use an alternate lifting method or replacing the lifting cable if required. There is no cost to the vehicle owner for the recall remedy. The repair should take approximately 5 hours to complete. What You Should Do: Please contact your local Cummins
Distributor to perform the remedy. Refer to Cummins
recall 21E-075 and internal campaign number 4495. You may also contact Cummins
Care at 1-800- CUMMINS
(1-800-286-6467) or visit our website at care.cummins
.com. Spartan Fire
, LLC If you need further assistance with this notification, you may contact your Dealer or Spartan Customer Service at 1-800-867-6478. Leased Vehicles: The lessor must notify the lessee by first class mail within ten (10) days from receipt of their owner notification letter from the manufacturer; both for the initial notification and all subsequent notifications. Reimbursement: If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information contact Spartan at 1‐800‐867-6478. Information Change: If you have changed your address, sold or traded your vehicle, please email us at Firetruckservice@spartanmotors.com to provide updated information. If the authorized service center has failed or is unable to remedy the defect without charge and within a reasonable time, contact Spartan at 1-800-867-6478. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov if you feel the manufacturer has failed or is unable to remedy the defect without charge. We regret any inconvenience this service may cause you. Your safety and continued satisfaction with the quality and performance of your chassis is of the utmost concern to us. Sincerely, Spartan Fire
, LLC
**************************************************************************************************************
SEOCONTENT-END