โThis site contains affiliate links for which OEMDTC may be compensatedโ |
December 20, 2021 NHTSA CAMPAIGN NUMBER: 21V999000
Bus May Move with Wheelchair Lift Deployed
Bus movement with the wheelchair lift deployed can increase the risk of injury.
NHTSA Campaign Number: 21V999
Manufacturer Daimler Trucks North America, LLC
Components EQUIPMENT ADAPTIVE/MOBILITY
Potential Number of Units Affected 2
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2022 Thomas Built Minotour School Buses built on a Ford
chassis. The driver may be able to release the parking brake and shift into a drive gear while the wheelchair lift is deployed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 404, “Platform Lift Installations.”
Remedy
DTNA service facilities will modify the wheelchair lift wiring as necessary, free of charge. No owner notifications will be distributed to owners. The recall was completed February 17, 2022. Owner may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL916.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
Chronology :
In November 2021, DTNA received a report from a dealer indicating that 2 new Minotour buses delivered to the dealer could be placed into gear while the lift was deployed. Thomas built buses immediately began an investigation to understand the issue and determine the scope. Production Quality records were reviewed to determine if the lifts had had a quality inspection. A review of production records indicated that the bus exhibiting the issue did not go through the normal production process. Thomas Built promptly began an investigation that included reviewing the production records to identify any additional buses that did not go through the normal production process; no such vehicles were found. In December 2021, upon determining the issue and the affected population, DTNA decided to conduct a non-compliance recall for certain Minotour school buses equipped with a wheelchair lift.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
THOMAS BUILT BUSES | MINOTOUR | 2022 |
8 Associated Documents
Recall 573 Report – 1/4/22
RCLRPT-21V999-8756.PDF 213.681KB
Miscellaneous Document
RMISC-21V999-8872.pdf 685.341KB
Recall Acknowledgement
RCAK-21V999-7437.pdf 369.039KB
Miscellaneous Document
RMISC-21V999-2675.pdf 685.755KB
Recall 573 Report – January 6, 2022
RCLRPT-21V999-5703.PDF 213.712KB
Recall Quarterly Report #1, 2022-1
RCLQRT-21V999-9957.PDF 211.15KB
Recall Quarterly Report #2, 2022-2
RCLQRT-21V999-5344.PDF 211.324KB
Recall Quarterly Report #3, 2022-3
RCLQRT-21V999-1174.PDF 211.324KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- Crimps insulated terminals onto 10-22 AWG stranded copper wire
- Adjustable compound action design puts more crimping power into each squeeze
- Three crimping cavities in one tool: 22โ16 AWG (Red), 16โ14 AWG (Blue) and 12โ10 AWG (Yellow) terminals
- Built-in ratchet ensures full-cycle crimping for a uniform crimp every time
- Unique cavity design provides consistent crimp from either side of the tool
- PROFESSIONAL CRIMPING TOOL: This crimping tool works best with Heat Shrink Connectors (AWG22-10) Plustool wire crimper has efficient ratcheting mechanism and professional grade crimping die for proper rock-solid crimps every time; Colored crimping die nests for quick identification. Besides, crimping plier will not damage the heat shrink insulation
- PRECISION RATCHETING STRUCTURE: Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically; The tool will self open when the required amount of crimping force has been applied, ensured uniform crimps everytime; The built-in quick release lever allows to open the crimper jaws in any position
- ERGONOMIC HANDLE DESIGN: Plustool crimper tool is designed for ergonomic cushioned handle that provides maximum comfort and reduced hand fatigue; Non-slip design ensures strong grips in any condition and provides maximum leverage, increasing comfort and making the grip self adjusting
- ADJUSTABLE COMPRESSION WHEEL: Plustool crimping tool features a star wheel, which allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project; Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system helps to a easier operation
- WIDELY COMPATIBLE: Suitable for heat shrink connectors; Hand crimper can be used for home appliance repair, vehicle circuit connection, and everything about circuit connection
- Crimper crimps 10 to 22 AWG insulated and non-insulated terminals
- Cutting and Crimping Tool has specially hardened wire cutter in nose
- Tapered nose design for working in confined spaces
- Crimping die marked for insulated and non-insulated solderless terminals and connectors
- Made in USA
- โ 8 inch Professional Wire Stripper: Cuts, strips wire and loops 10-22 AWG Solid copper wire or aluminum cables.high carbon alloy steel with accurate stripping.
- โ PREMIUM MATERIAL: Crafted from high carbon alloy steel for durability and precision. Ensures accurate stripping and long-lasting performance even with frequent use.
- โ Designed Grip Handle:Cutting action combined with ergonomic curved handle, designed non-slip rubber handle, which enables firm grip and eliminates hand fatigue
- โ ALL-IN-ONE WIRE CRIMPING TOOL: Ideal for crimping both insulated and non-insulated terminals, making it a versatile tool for any electrical job.
- โ 24 Month Warranty: Quality assurance. 24 Month warranty and 24/7 customer service for peace of mind. A reliable choice for both professionals and DIY enthusiasts.
- Precise and Professional Connections: This crimping tool is meticulously engineered to deliver precise and secure wire connections. You'll achieve professional-grade results with every crimp. Say goodbye to loose connections or unreliable electrical performance.
- Effortless Wire Stripping:The wire stripper tool makes the process of removing insulation a breeze. Its sharp and adjustable blades ensure clean and precise stripping, saving you time and frustration. No more damaged wires or uneven stripping - just smooth and flawless results.
- Versatility at its Finest: This dynamic tool set is designed to handle a wide range of wire sizes and types.For wire stripper tool AWG24-10, wire crimper tool AWG22-10.Enough to accommodate your diverse needs. You'll have the right tools for any electrical project.
- Comfortable and User-Friendly: We understand that prolonged use of tools can be tiring. That's why our crimping tool and wire stripper tool are ergonomically designed for comfort and ease of use. The non-slip handles provide a secure grip, reducing hand fatigue and ensuring precise control. Enjoy a seamless and comfortable wireworking experience.
- Durability That Lasts: The haisstronica tools are built to withstand the rigors of daily use. Crafted from high-quality materials, they offer exceptional durability and longevity. Invest in tools that will serve you reliably project after project, year after year. No more frequent replacements - just tools you can trust.
- [VERSATILE]: Strips and removes insulation. Crimp insulated and bare wires. gripping nose works to pull, hold, twist, and bend wire ends.
- [COMPACT]: Thin cable cutter design combines 4 separate functions into one compact 7โ tool, ideal for common wire connectors and repairs.
- [DURABLE]: Solid forged alloy steel construction with a protective black finish stands up to extensive everyday carry and daily use.
- [PRECISE]: Blades and teeth are heat treated CNC machined for precision accurate, and clean smooth cuts on copper, aluminum, cables, automotive wires, and soft steel wires.
- [SIZES]: Cut, grip, twist, pull, crimp, and strip wires and cables in gauges from 12, 14, 16, 18 & 20 AWG in one small handheld tool.
- Strong Crimps Is The Core- The main job of the tool is to make beautiful crimps! The hand-replacement crimping tool jaws is tightened securely, which also means that there is no jaw drop, especially in ocean and specific scenarios.The haisstronica crimp tool jaws forged with 40CR precision technology can complete a firm crimp at one time. Instead of making your heat shrink look like it's been through a street fight.
- Wire Crimping Tool Set- The tool set includes 1 wire crimping tool,6 different types of chrome dies. Complete with crimping tools for wiring projects, All you need to do is just take it away!
- Choose Without Barriers-Your equipment should never hold you back; When you need to change different wire connectors,the AWG-marked chrome-plated crimp dies offer you 6 options including heat shrink connectors,Insulated and nylon wire terminals,Non-insulated terminals,Insulated cable-end sleeves,open barrel terminals and solar connectors.Easy to operate, no confusion!
- Precise Eatchet Structure- A good product depends on exquisite workmanship! Features a comfortable grip and firm ratchet action for smooth crimp tool action and good release. The crimp secures tightly "like a solder" to the wire terminal. Make equipment more secure!
- Buyer Confidence- We stand behind the quality of our products. If for any reason you are not satisfied with your purchase,please contact us.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!
- PROFESSIONAL CRIMPING TOOL - YNZDRWA crimping tool works best with Heat Shrink Connectors (AWG22-10), This wire crimper tool has efficient ratcheting mechanism and high-precision jaw which is marked with red/blue/yellow for easy identification
- PRECISION RATCHETING STRUCTURE - The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Built-in ratchet ensures full-cycle crimping for a uniform crimp every time
- ADJUSTABLE CRIMPING FORCE - The terminal crimper features a star wheel, which allows to adjust crimping height to ensure moderate crimping force depending on your crimping project
- UPGRADED ERGONOMIC HANDLE DESIGN - Dual-material molded grips provide additional comfort. Non-slip design to ensure strong grips in any condition
- WIDELY COMPATIBLE - YNZDRWA Crimping Tool for Heat Shrink Connectors, this Wire Crimper can be used for repair of household appliances, vehicle circuit connection, and everything about circuit connection
- PROFESSIONAL CRIMPING TOOL - this hand crimper has efficient ratcheting mechanism and professional grade crimping die for proper rock-solid crimps every time. This crimping tool works best with insulated nylon electrical terminals. A perfect wire connectors crimp.
- CRIMPING TOOLS FOR ELECTRICAL CONNECTORS โ wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp.
- ADJUSTABLE CRIMPING FORCE - The wire crimpers electrical has a star wheel that allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. A designated quick release lever allows to open the crimper jaws in any position
- ERGONOMIC COMFORTABLE HANDLES - The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp AWG 22-10 splices.
- WIREFY QUALITY ASSURANCE - Wirefy is committed to the excellence of our products. We ensure support for our crimping tools. If you encounter any issues with your crimpers, just let us know. Our customer experience team is always here to help.
- This wire crimper tool works best with heat shrink connectors.this hand crimper has efficient ratcheting mechanism and High-precision jaw which is color coded. Crimping is accurate and never damage the terminal,crimping is in one step.
- Ergonomic handle provides maximum comfort and reduced hand fatigue.Non-slip design to ensure strong grips in any condition,provides maximum leverage and increased comfort making the grip self adjusting.
- This wire crimper is made of premium industrial grade high strength carbon steel which is treated with black oxidation,rust and corrosion resistance.Qibaok professional insulated wire terminals connectors ratcheting crimper tool is designed for 22-10AWG.
- This terminal crimper has a star wheel that you can adjust the handle crimp strength by adjusting the roulette to ensure uniform crimping each time.Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system help to a easier operation.The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp.
- Wire Crimper can be used for home appliance repair, home circuit repair, vehicle circuit connection, and everything about circuit connection.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Defect Information Report (Section 573.6) FL-916 Date of Submission: December 20, 2021 Manufacturer: Daimler Trucks North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: โ Safety Defect X Non-Compliance Vehicle Information Model Yr. Start: 2022 Model Yr. End: 2022 Make: Thomas Built Buses Model: Ford
Minotour Production Dates: Begin: 06/25/2021 End: 07/20/2021 Type: School Bus Descriptive Information: Minotour school buses with a Ford
chassis and a wheelchair lift Number potentially involved: 2 vehicles Estimated percentage of involve with defect: 100 % Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: On the affected Minotour school buses, the driver may be able to release the park brake and shift the transmission out of Park and into a drive gear while the wheelchair lift is deployed, which is not compliant with FMVSS 404 S4.1.4. These vehicles were caught in inspection prior to delivery to the ultimate purchaser. If a noncompliance, provide the applicable FMVSS: FMVSS 404 Describe the safety risk: Wheelchair lifts that do not meet the requirements of FMVSS 404 may have an increased risk of injury. Identify any warning which can precede or occur: The event will only occur if the operator does not follow the proper procedures while operating the wheelchair lift. If applicable, identify the manufacture of the defective or noncompliant component.: There are no defective or noncompliant components involved in this recall. The defect is due to the installation at Thomas Built Buses Involved Components Component Name: NA Component Description: N/A Component Part Number: N/A Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision. In November 2021, DTNA received a report from a dealer indicating that 2 new Minotour buses delivered to the dealer could be placed into gear while the lift was deployed. Thomas built buses immediately began an investigation to understand the issue and determine the scope. Production Quality records were reviewed to determine if the lifts had had a quality inspection. A review of production records indicated that the bus exhibiting the issue did not go through the normal production process. Thomas Built promptly began an investigation that included reviewing the production records to identify any additional buses that did not go through the normal production process; no such vehicles were found. In December 2021, upon determining the issue and the affected population, DTNA decided to conduct a non-compliance recall for certain Minotour school buses equipped with a wheelchair lift. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. The wheelchair lift wiring will be modified as needed to ensure compliance with FMVSS 404. Repairs will be made by Daimler Trucks
North America authorized service facilities. Details of the reimbursement plan will be included in the ownerโs notification letter. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Trucks
North America records to determine the customers affected. Planned Dealer Notification Begin Date: 02/17/2022 Planned Dealer Notification End Date: 02/17/2022 Planned Owner Notification Begin Date: 02/17/2022 Planned Owner Notification End Date: 02/17/2022 Manufactureโs identification code for this recall (if applicable): FL-916 DTNA Representative; Tiffani Torgeson Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Defect Information Report (Section 573.6) FL-916 Date of Submission: December 20, 2021 Manufacturer: Daimler Trucks North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: โ Safety Defect X Non-Compliance Vehicle Information Model Yr. Start: 2022 Model Yr. End: 2022 Make: Thomas Built Buses Model: Ford
Minotour Production Dates: Begin: 06/25/2021 End: 07/20/2021 Type: School Bus Descriptive Information: Minotour school buses with a Ford
chassis and a wheelchair lift Number potentially involved: 2 vehicles Estimated percentage of involve with defect: 100 % Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: On the affected Minotour school buses, the driver may be able to release the park brake and shift the transmission out of Park and into a drive gear while the wheelchair lift is deployed, which is not compliant with FMVSS 404 S4.1.4. These vehicles were caught in inspection prior to delivery to the ultimate purchaser. If a noncompliance, provide the applicable FMVSS: FMVSS 404 Describe the safety risk: Wheelchair lifts that do not meet the requirements of FMVSS 404 may have an increased risk of injury. Identify any warning which can precede or occur: The event will only occur if the operator does not follow the proper procedures while operating the wheelchair lift. If applicable, identify the manufacture of the defective or noncompliant component.: There are no defective or noncompliant components involved in this recall. The defect is due to the installation at Thomas Built Buses Involved Components Component Name: Harness Wiring-Lift Interface Component Description: Wiring Harness Component Part Number: 228418 Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision. In November 2021, DTNA received a report from a dealer indicating that 2 new Minotour buses delivered to the dealer could be placed into gear while the lift was deployed. Thomas built buses immediately began an investigation to understand the issue and determine the scope. Production Quality records were reviewed to determine if the lifts had had a quality inspection. A review of production records indicated that the bus exhibiting the issue did not go through the normal production process. Thomas Built promptly began an investigation that included reviewing the production records to identify any additional buses that did not go through the normal production process; no such vehicles were found. In December 2021, upon determining the issue and the affected population, DTNA decided to conduct a non-compliance recall for certain Minotour school buses equipped with a wheelchair lift. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. The wheelchair lift wiring will be modified as needed to ensure compliance with FMVSS 404. Repairs will be made by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the ownerโs notification letter. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected. Planned Dealer Notification Begin Date: 02/17/2022 Planned Dealer Notification End Date: 02/17/2022 Planned Owner Notification Begin Date: 02/17/2022 Planned Owner Notification End Date: 02/17/2022 Manufactureโs identification code for this recall (if applicable): FL-916 DTNA Representative; Tiffani Torgeson Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-999 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : JAN 04, 2022 NHTSA Recall No. : 21V-999 Manufacturer Recall No. : FL916 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 2 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Thomas Built Buses Ford Minotour Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : Minotour school buses with a Ford chassis and a wheelchair lift. Production Dates : JUN 25, 2021 – JUL 20, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On the affected Minotour school buses, the driver may be able to release the park brake and shift the transmission out of Park and into a drive gear while the wheelchair lift is deployed, which is not compliant with FMVSS 404 S4.1.4. These vehicles were caught in inspection prior to delivery to the ultimate purchaser. FMVSS 1 : 404 – Platform lift installations FMVSS 2 : NR Description of the Safety Risk : Wheelchair lifts that do not meet the requirements of FMVSS 404 may have an increased risk of injury. Description of the Cause : NR Identification of Any Warning that can Occur : The event will only occur if the operator does not follow the proper procedures while operating the wheelchair lift. Involved Components : Part 573 Safety Recall Report 21V-999 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In November 2021, DTNA received a report from a dealer indicating that 2 new Minotour buses delivered to the dealer could be placed into gear while the lift was deployed. Thomas built buses immediately began an investigation to understand the issue and determine the scope. Production Quality records were reviewed to determine if the lifts had had a quality inspection. A review of production records indicated that the bus exhibiting the issue did not go through the normal production process. Thomas Built promptly began an investigation that included reviewing the production records to identify any additional buses that did not go through the normal production process; no such vehicles were found. In December 2021, upon determining the issue and the affected population, DTNA decided to conduct a non-compliance recall for certain Minotour school buses equipped with a wheelchair lift. Description of Remedy : Description of Remedy Program : The wheelchair lift wiring will be modified as needed to ensure compliance with FMVSS 404. Repairs will be made by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the ownerโs notification letter. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Part 573 Safety Recall Report 21V-999 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected. Planned Dealer Notification Date : FEB 17, 2022 – FEB 17, 2022 Planned Owner Notification Date : FEB 17, 2022 – FEB 17, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-999 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : JAN 06, 2022 NHTSA Recall No. : 21V-999 Manufacturer Recall No. : FL916 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 2 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Thomas Built Buses Ford Minotour Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : Minotour school buses with a Ford chassis and a wheelchair lift. Production Dates : JUN 25, 2021 – JUL 20, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On the affected Minotour school buses, the driver may be able to release the park brake and shift the transmission out of Park and into a drive gear while the wheelchair lift is deployed, which is not compliant with FMVSS 404 S4.1.4. These vehicles were caught in inspection prior to delivery to the ultimate purchaser. FMVSS 1 : 404 – Platform lift installations FMVSS 2 : NR Description of the Safety Risk : Wheelchair lifts that do not meet the requirements of FMVSS 404 may have an increased risk of injury. Description of the Cause : NR Identification of Any Warning that can Occur : The event will only occur if the operator does not follow the proper procedures while operating the wheelchair lift. Involved Components : Part 573 Safety Recall Report 21V-999 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Harness Wiring-Lift Interface Component Description : Wiring Harness Component Part Number : 228418 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In November 2021, DTNA received a report from a dealer indicating that 2 new Minotour buses delivered to the dealer could be placed into gear while the lift was deployed. Thomas built buses immediately began an investigation to understand the issue and determine the scope. Production Quality records were reviewed to determine if the lifts had had a quality inspection. A review of production records indicated that the bus exhibiting the issue did not go through the normal production process. Thomas Built promptly began an investigation that included reviewing the production records to identify any additional buses that did not go through the normal production process; no such vehicles were found. In December 2021, upon determining the issue and the affected population, DTNA decided to conduct a non-compliance recall for certain Minotour school buses equipped with a wheelchair lift. Description of Remedy : Description of Remedy Program : The wheelchair lift wiring will be modified as needed to ensure compliance with FMVSS 404. Repairs will be made by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the ownerโs notification letter. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Part 573 Safety Recall Report 21V-999 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected. Planned Dealer Notification Date : FEB 17, 2022 – FEB 17, 2022 Planned Owner Notification Date : FEB 17, 2022 – FEB 17, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END