March 1, 2022 NHTSA CAMPAIGN NUMBER: 22E015000
High Pressure Fuel Rail Assembly May Leak Fuel
A fuel leak in the presence of an ignition source increases the risk of a fire.
NHTSA Campaign Number: 22E015
Manufacturer Marion Body Works Inc.
Components FUEL SYSTEM, DIESEL
Potential Number of Units Affected 3
Summary
Marion Body Works Inc. (Marion) is recalling certain 2021 Freightliner
M2, 2020 Kenworth
T3, and 2018 International
SR525 emergency vehicles equipped with certain Cummins
diesel engines. The sealing washer may not seat correctly in the pilot bore holes, allowing the high-pressure fuel rail assembly to leak.
Remedy
Cummins
service centers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owner notification letters were mailed on March 7, 2022. Owners may contact Marion’s customer service at 1-715-754-5261. Marion’s number for this recall is 20E-032.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
February 10, 2021 – A field service technician reported to Cummins
that eight buses belonging to a single customer had been repaired since December 2020 for leaks at sealing washers in the fuel rail.
February 11- March 1, 2021 – Cummins
investigated the cause of the leaks with the supplier of the rail and began an investigation of field warranty claims. Cummins
conducted an initial Product Safety Hazard Analysis.
March 3 – April 12, 2021 – Cummins
escalated the issue through its Product Safety Defect Board process, gathered additional data and revised the Product Safety Hazard Analysis. Cummins
issued a Technical Service Bulletin (TSB210055) on March 4, 2021 to allow the field to replace rails that have washer leaks with a different rail and their associated fuel lines. (TSB210055 was submitted to NHTSA on April 7, 2021 in accordance with 49 CFR Part 579.5.)
April 13, 2021 – Based upon the results of the investigation, Cummins
’ Product Defect Safety Board decided to conduct a safety campaign on engines installed in buses, school buses, emergency vehicle and recreational vehicle applications.
3 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| MARION BODY WORKS | FREIGHTLINER | 2021 |
| MARION BODY WORKS | INTERNATIONAL | 2018 |
| MARION BODY WORKS | KENWORTH | 2020 |
11 Associated Documents
Recall 573 Report- 03/17/2022
RCLRPT-22E015-4896.PDF 217.149KB
Recall Acknowledgement
RCAK-22E015-4497.pdf 645.771KB
Defect Notice 573 Report
RCLRPT-22E015-1328.PDF 215.414KB
Recall 573 Report- 05/04/2022
RCLRPT-22E015-5092.PDF 217.119KB
Recall Quarterly Report #1, 2022-1
RCLQRT-22E015-8667.PDF 239.325KB
Recall Quarterly Report #2, 2022-2
RCLQRT-22E015-4711.PDF 211.232KB
Recall Quarterly Report #3, 2022-3
RCLQRT-22E015-2320.PDF 211.314KB
Recall Quarterly Report #4, 2022-4
RCLQRT-22E015-0655.PDF 211.418KB
Recall Quarterly Report #5, 2023-1
RCLQRT-22E015-8825.PDF 211.527KB
Recall Quarterly Report #6, 2023-2
RCLQRT-22E015-3480.PDF 211.825KB
Recall Quarterly Report #7, 2023-3
RCLQRT-22E015-0409.PDF 211.825KB
Latest Recalls Documents
- [Wide Compatibility Heavy Duty Truck Scanner] Compatible with a wide range of 12V & 24V heavy-duty trucks across North America, including major truck brands such as Freightliner
, Peterbilt
, Kenworth
, International
, Volvo
, and Western Star
, with support for common diesel engines from Cummins
, Detroit, and PACCAR
. Whether you're an owner-operator, fleet manager, or repair technician, HD601 helps simplify routine inspections, preventive maintenance, and everyday fault checks. Vehicle coverage may vary by model year, system, and configuration - [Full-System Diagnostic Truck Scanner] This heavy duty diagnostic scanner supports full-system diagnostics for heavy-duty trucks, including Engine, Transmission, ABS, and more.It helps quickly identify faults, pinpoint problem areas, troubleshoot faster, and understand which systems need attention before repairs. Compatible light-duty vehicles support OBD2 diagnostics only
- [DTC Library + Live Data] This truck diagnostic scanner's built-in DTC library helps truck drivers, DIY users, and more quickly understand fault information. You can also manually enter standard SPN and FMI codes to look up fault details. For roadside situations without internet access, it helps identify possible problem areas
- [2-in-1 Heavy Duty & OBDII Diagnostics] This heavy duty scanner supports both HDOBD and OBDII diagnostics. It provides essential functions including Quick Scan, Full Scan, Live Data, Freeze Frame Data, Fault Code Reading and Clearing, and more. It supports HDOBD protocols such as J1939 and J1587/J1708 for reliable vehicle communication
- [Supports Multiple Vehicle Types] Suitable for various commercial vehicles, including heavy-duty trucks, semi-trucks, buses, and more. This truck scanner diagnostic tool features 6/9/16-pin connectors to support common vehicle interfaces, making it suitable for different vehicle applications and transportation needs
- Boost DPF Performance For Smooth Truck Operation: Facing power loss, weak acceleration or constant DPF warning lights? The DPF regen scan tool offers forced DPF regeneration, DPF Reset, and DPD/DPR functions to clear soot buildup, recover engine output and keep exhaust aftertreatment working properly. Detect DPF‑related errors fast, reduce downtime, and prolong your diesel particulate filter lifespan. Vehicle compatibility varies. Please verify before purchase.
- Full-System Diagnostics with Real-Time Live Data: This truck scanner diagnostic tool covers Engine, ABS, Transmission, SRS, SAS, TPMS and other core vehicle systems. Read & clear fault codes, access live data stream, freeze frame, I/M readiness, DTC lookup and additional practical functions. Leverage real‑time data to quickly locate faults and support reliable repair judgements.
- 7+ Resets ‑ Perform Essential Service Procedures: The heavy duty diagnostic tool comes with 7+ professional service resets. It supports DPF Regen for soot removal, Oil Reset to erase service reminders, Injector Coding for new injectors, DEF Test, Speed Limit Adjustment, Cylinder Cutout for weak cylinder detection, Clutch Relearn for improved clutch engagement. Run these resets after service or component replacement to keep your truck working properly. Available functions vary by vehicle model.
- One Professional heavy duty scanner for 50+ Truck Brands: Compatible with J1939, J1708, J1587, and OBD2/CAN protocols this semi truck scanner delivers wide coverage for mainstream diesel trucks and commercial vehicles. Supported brands include Cummins
, Detroit, Caterpillar
, Paccar
, Volvo
, Freightliner
, Kenworth
, Peterbilt
, International
, Mack
, Isuzu
, Hino, Scania, Mercedes-Benz
, and more. This single diesel diagnostic scanner lets you service more vehicles and cut down tool investment costs. - Expert Remote Diagnostic Support: Faced with unexpected truck breakdowns? Equipped with built‑in TeamViewer and tech‑to‑tech support, this diesel truck scanner enables secure real‑time remote connection with professional technicians for diagnosis and troubleshooting. Share live vehicle data and send diagnostic feedback for quicker technical analysis to get expert guidance, no on‑site service required. Minimize downtime, prevent unnecessary repairs and get your truck back on the road sooner.
- BROAD VEHICLE & ENGINE COVERAGE: Professional heavy duty truck scanner for trucks, buses, medium-duty vehicles, construction and agricultural equipment. Supports major brands including Freightliner
, Kenworth
, Peterbilt
, Mack
, International
, Volvo
, Hino and Isuzu
, plus Cummins
, Detroit, PACCAR
, Caterpillar
and International
A26 engines. J1939/J1708 support covers newer and legacy commercial vehicles. Verify coverage before purchase - DPF REGEN & DEF/SCR: Diagnose supported diesel aftertreatment systems with DPF regeneration, soot load, differential pressure, exhaust temperature, NOx sensor and DEF level data. Helps identify DPF blockage, excessive soot, DEF/SCR faults, warning lights and derate-related issues, providing key data for faster aftertreatment diagnosis and service
- BIDIRECTIONAL ACTIVE TESTS: Go beyond code reading with two-way component testing. Command and monitor supported injectors, EGR/VGT actuators, cooling fans, fuel pumps and relays to help verify operation. Cylinder cut-off testing helps identify misfires, cylinder contribution and injector-related issues, reducing unnecessary parts replacement
- 40+ DIESEL SERVICE FUNCTIONS: Focused on high-frequency shop tasks including oil reset, injector coding, speed limiter adjustment and idle speed adjustment. Additional service and reset functions support chassis and other routine maintenance needs. Speed and idle adjustments remain within supported manufacturer parameters
- INDUSTRIAL-GRADE DUAL-CHIP HARDWARE: Quad-core 2.0 GHz processor and automotive-grade communication MCU support smooth multitasking and reliable vehicle communication. Wireless VCI offers up to 10 m Bluetooth connectivity. An 8-inch high-brightness display supports glove-friendly use
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner
, Peterbilt
, Kenworth
, Volvo
, Mack
and Cummins
-powered vehicles - Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
- HANDLE MORE HEAVY-DUTY JOBS WITH ONE SCANNER — The ANCEL X7HD PRO brings full-system diagnostics, HDOBD/OBD2 diagnostics, 42+ service functions, bi-directional controls, and ECU coding into one heavy-duty scan tool. Built for diesel technicians, repair shops, and fleet maintenance teams that need one scanner for everyday diagnostics, service, active tests, and post-repair work
- TAKE ON 42+ SERVICE & RESET JOBS IN-HOUSE — Perform supported DPF regeneration, injector coding, oil reset, throttle adaptation, EPB reset, ABS bleeding, idle/speed adjustment, and more. Handle more routine maintenance and service work in your own shop or fleet yard instead of relying on a dealer or separate tools for every job
- COMMAND COMPONENTS & CHECK THEIR RESPONSE — Bi-directional control lets you command supported components such as injectors, cooling fans, throttle actuators, and ABS-related systems, then check how they respond. Use active tests to narrow down a problem before tearing things apart or replacing parts, helping you troubleshoot based on actual component behavior instead of fault codes alone
- CODE & MATCH MODULES AFTER REPLACEMENT — Perform supported ECU coding, module matching, adaptations, and relearn procedures when replacing compatible components or control modules. Complete more post-repair setup with the same scanner and help ensure replacement modules are properly configured to communicate with the vehicle
- DIAGNOSE MORE SYSTEMS ACROSS A MIXED FLEET — Read and clear codes, view live data and freeze frame information, and access supported systems including Engine, Transmission, ABS, and Body. Coverage includes compatible Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, and International
trucks; Cummins
, Caterpillar
, Detroit, PACCAR
, and Navistar
engines; plus supported OBD2/HDOBD vehicles—giving multi-brand shops and fleets broader coverage from one tool
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-015
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Marion Body Works Inc.
Submission Date : MAY 04, 2022
NHTSA Recall No. : 22E-015
Manufacturer Recall No. : 20E-032
Manufacturer Information :
Manufacturer Name : Marion Body Works Inc.
Address : 211 West Ramsdell St.
Marion WI 54950
Company phone : 715-754-5261
Population :
Number of potentially involved : 3
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : International![]()
Model : SR525
Part No. : D0K3003BX03
Size : NR
Function : Diesel Engine
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
International
SR525 2018
Freightliner
M2 2021
Kenworth
T3 Series 2020
Production Dates : JAN 02, 2017 – OCT 16, 2020
Part 573 Safety Recall Report 22E-015 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 2 : Kenworth![]()
Model : T3 Series
Part No. : D563025BX03
Size : NR
Function : NR
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
International
SR525 2018
Freightliner
M2 2021
Kenworth
T3 Series 2020
Production Dates : JAN 02, 2017 – OCT 16, 2020
Brand / Trade 3 : Freightliner![]()
Model : M2
Part No. : D563025BX03
Size : NR
Function : NR
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
International
SR525 2018
Freightliner
M2 2021
Kenworth
T3 Series 2020
Production Dates : JAN 02, 2017 – OCT 16, 2020
Description of Defect :
Description of the Defect : The fuel rail assembly may develop leaks, which may result in an undetected
prolonged diesel fuel spray.
FMVSS 1 : NR
Part 573 Safety Recall Report 22E-015 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
FMVSS 2 : NR
Description of the Safety Risk : A leak involving spraying/misting fuel in the presence of an ignition source
may increase the risk of fire.
Description of the Cause : The rail end sealing bores in the fuel rail may have undersized pilot bores for
the sealing washer, thus preventing the washer from properly seating,
potentially resulting in inadequate load for the joint to remain properly sealed
in service.
Identification of Any Warning
that can Occur :
The operator may see or smell diesel fuel. In some cases, the check engine lamp
may illuminate.
Involved Components :
Component Name : Accumulator
Component Description : High Pressure Fuel Rail Assembly
Component Part Number : 4307034
Component Name : Accumulator
Component Description : High Pressure Fuel Rail Assembly
Component Part Number : 4307377
Supplier Identification :
Component Manufacturer
Name : Cummins![]()
Address : 500 Jackson Street
Columbus Indiana 47201
Country : United States
Chronology :
February 10, 2021 – A field service technician reported to Cummins
that eight buses belonging to a single
customer had been repaired since December 2020 for leaks at sealing washers in the fuel rail.
February 11- March 1, 2021 – Cummins
investigated the cause of the leaks with the supplier of the rail and
began an investigation of field warranty claims. Cummins
conducted an initial Product Safety Hazard Analysis.
Part 573 Safety Recall Report 22E-015 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
March 3 – April 12, 2021 – Cummins
escalated the issue through its Product Safety Defect Board process,
gathered additional data and revised the Product Safety Hazard Analysis. Cummins
issued a Technical Service
Bulletin (TSB210055) on March 4, 2021 to allow the field to replace rails that have washer leaks with a
different rail and their associated fuel lines. (TSB210055 was submitted to NHTSA on April 7, 2021 in
accordance with 49 CFR Part 579.5.)
April 13, 2021 – Based upon the results of the investigation, Cummins
’ Product Defect Safety Board decided to
conduct a safety campaign on engines installed in buses, school buses, emergency vehicle and recreational
vehicle applications.
Description of Remedy :
Description of Remedy Program : Contact the nearest Cummins
Distributor or authorized Warranty Dealer
to arrange to have this campaign performed on your engine. The
distributor or dealer will work with you to schedule the best date to
complete this repair.
A recall-specific reimbursement plan will be provided in the Recall Portal
for those units not covered by the manufacturer’s limited warranty.
The rail threads will be inspected for damage. If damage is found on the
threads, the rail will be replaced with a rail of a different design. The fuel
lines will also be replaced with lines of a different design if the rail is
replaced. If no damage is found on the threads, new crush washers will be
installed.
How Remedy Component Differs
from Recalled Component :
For units having no thread damage, the technician will be instructed to
place a paint dot somewhere on the rail to indicate that the repair has
been completed. For units that do have thread damage, the replacement
rail and fuel lines will have unique part numbers. The replacement rail and
lines are also visibly different.
Identify How/When Recall Condition
was Corrected in Production :
The rail manufacturing statistical process control for the pilot bores was
confirmed in control after October 19, 2020.
Recall Schedule :
Description of Recall Schedule : Cummins
expects to notify affected OEMs no later than April 30, 2021.
Cummins
will conduct the recall and notify owners. The timing of owner
notification will be determined in consultation with the affected OEMs
Cummins
expects to begin sending interim notification letters on June 19,
2021 to owners for which Cummins
has received owner addresses. When
Cummins
is ready to implement the remedy campaign, Cummins
will
notify all owners for which it has received owner information. Owners
who previously received an interim letter notification will receive a
Part 573 Safety Recall Report 22E-015 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
second notification. Cummins
anticipates mailing owner letters
communicating the availability of the remedy during July 2021.
Planned Dealer Notification Date : MAR 03, 2022 – MAR 07, 2022
Planned Owner Notification Date : MAR 03, 2022 – MAR 07, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-015
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Marion Body Works Inc.
Submission Date : MAR 17, 2022
NHTSA Recall No. : 22E-015
Manufacturer Recall No. : 20E-032
Manufacturer Information :
Manufacturer Name : Marion Body Works Inc.
Address : 211 West Ramsdell St.
Marion WI 54950
Company phone : 715-754-5261
Population :
Number of potentially involved : 3
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : International![]()
Model : SR525
Part No. : D0K3003BX03
Size : NR
Function : Diesel Engine
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
International
SR525 2018
Freightliner
M2 2021
Kenworth
T3 Series 2020
Production Dates : JAN 02, 2017 – OCT 16, 2020
Part 573 Safety Recall Report 22E-015 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 2 : Freightliner![]()
Model : M2
Part No. : D563025BX03
Size : NR
Function : NR
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
International
SR525 2018
Freightliner
M2 2021
Kenworth
T3 Series 2020
Production Dates : JAN 02, 2017 – OCT 16, 2020
Brand / Trade 3 : Kenworth![]()
Model : T3 Series
Part No. : D563025BX03
Size : NR
Function : NR
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
International
SR525 2018
Freightliner
M2 2021
Kenworth
T3 Series 2020
Production Dates : JAN 02, 2017 – OCT 16, 2020
Description of Defect :
Description of the Defect : The fuel rail assembly may develop leaks, which may result in an undetected
prolonged diesel fuel spray.
FMVSS 1 : NR
Part 573 Safety Recall Report 22E-015 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
FMVSS 2 : NR
Description of the Safety Risk : A leak involving spraying/misting fuel in the presence of an ignition source
may increase the risk of fire.
Description of the Cause : The rail end sealing bores in the fuel rail may have undersized pilot bores for
the sealing washer, thus preventing the washer from properly seating,
potentially resulting in inadequate load for the joint to remain properly sealed
in service.
Identification of Any Warning
that can Occur :
The operator may see or smell diesel fuel. In some cases, the check engine lamp
may illuminate.
Involved Components :
Component Name : Accumulator
Component Description : High Pressure Fuel Rail Assembly
Component Part Number : 4307034
Component Name : Accumulator
Component Description : High Pressure Fuel Rail Assembly
Component Part Number : 4307377
Supplier Identification :
Component Manufacturer
Name : Senior Flexonics – Land Vehicles
Address : 300 East Devon Avenue
Bartlett Illinois 60103
Country : United States
Chronology :
February 10, 2021 – A field service technician reported to Cummins
that eight buses belonging to a single
customer had been repaired since December 2020 for leaks at sealing washers in the fuel rail.
February 11- March 1, 2021 – Cummins
investigated the cause of the leaks with the supplier of the rail and
began an investigation of field warranty claims. Cummins
conducted an initial Product Safety Hazard Analysis.
Part 573 Safety Recall Report 22E-015 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
March 3 – April 12, 2021 – Cummins
escalated the issue through its Product Safety Defect Board process,
gathered additional data and revised the Product Safety Hazard Analysis. Cummins
issued a Technical Service
Bulletin (TSB210055) on March 4, 2021 to allow the field to replace rails that have washer leaks with a
different rail and their associated fuel lines. (TSB210055 was submitted to NHTSA on April 7, 2021 in
accordance with 49 CFR Part 579.5.)
April 13, 2021 – Based upon the results of the investigation, Cummins
’ Product Defect Safety Board decided to
conduct a safety campaign on engines installed in buses, school buses, emergency vehicle and recreational
vehicle applications.
Description of Remedy :
Description of Remedy Program : Contact the nearest Cummins
Distributor or authorized Warranty Dealer
to arrange to have this campaign performed on your engine. The
distributor or dealer will work with you to schedule the best date to
complete this repair.
A recall-specific reimbursement plan will be provided in the Recall Portal
for those units not covered by the manufacturer’s limited warranty.
The rail threads will be inspected for damage. If damage is found on the
threads, the rail will be replaced with a rail of a different design. The fuel
lines will also be replaced with lines of a different design if the rail is
replaced. If no damage is found on the threads, new crush washers will be
installed.
How Remedy Component Differs
from Recalled Component :
For units having no thread damage, the technician will be instructed to
place a paint dot somewhere on the rail to indicate that the repair has
been completed. For units that do have thread damage, the replacement
rail and fuel lines will have unique part numbers. The replacement rail and
lines are also visibly different.
Identify How/When Recall Condition
was Corrected in Production :
The rail manufacturing statistical process control for the pilot bores was
confirmed in control after October 19, 2020.
Recall Schedule :
Description of Recall Schedule : Cummins
expects to notify affected OEMs no later than April 30, 2021.
Cummins
will conduct the recall and notify owners. The timing of owner
notification will be determined in consultation with the affected OEMs
Cummins
expects to begin sending interim notification letters on June 19,
2021 to owners for which Cummins
has received owner addresses. When
Cummins
is ready to implement the remedy campaign, Cummins
will
notify all owners for which it has received owner information. Owners
who previously received an interim letter notification will receive a
Part 573 Safety Recall Report 22E-015 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
second notification. Cummins
anticipates mailing owner letters
communicating the availability of the remedy during July 2021.
Planned Dealer Notification Date : MAR 03, 2022 – MAR 07, 2022
Planned Owner Notification Date : MAR 03, 2022 – MAR 07, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-015
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Marion Body Works Inc.
Submission Date : MAR 01, 2022
NHTSA Recall No. : 22E-015
Manufacturer Recall No. : 20E-032
Manufacturer Information :
Manufacturer Name : Marion Body Works Inc.
Address : 211 West Ramsdell St.
Marion WI 54950
Company phone : 715-754-5261
Population :
Number of potentially involved : 3
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : Cummins, Inc.
Model : L9![]()
Part No. : D0K3003BX03
Size : NR
Function : Diesel Engine
Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems which
includes a high pressure fuel rail. The production begin and end dates were
determined from the manufacturing and quality records that established the
population of high pressure rails and engines that may contain the defect. The
recall consists of engines installed in bus, school bus, emergency vehicle and
recreational vehicles due to relatively low detectability of the potential hazard
and relatively high vulnerability to potential injury in those applications.
Production Dates : JAN 02, 2017 – OCT 16, 2020
Description of Defect :
Description of the Defect : The fuel rail assembly may develop leaks, which may result in an undetected
prolonged diesel fuel spray.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : A leak involving spraying/misting fuel in the presence of an ignition source
may increase the risk of fire.
Description of the Cause : The rail end sealing bores in the fuel rail may have undersized pilot bores for
the sealing washer, thus preventing the washer from properly seating,
potentially resulting in inadequate load for the joint to remain properly sealed
in service.
Part 573 Safety Recall Report 22E-015 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Identification of Any Warning
that can Occur :
The operator may see or smell diesel fuel. In some cases, the check engine lamp
may illuminate.
Involved Components :
Component Name : Accumulator
Component Description : High Pressure Fuel Rail Assembly
Component Part Number : 4307034
Component Name : Accumulator
Component Description : High Pressure Fuel Rail Assembly
Component Part Number : 4307377
Supplier Identification :
Component Manufacturer
Name : Senior Flexonics – Land Vehicles
Address : 300 East Devon Avenue
Bartlett Illinois 60103
Country : United States
Chronology :
February 10, 2021 – A field service technician reported to Cummins that eight buses belonging to a single
customer had been repaired since December 2020 for leaks at sealing washers in the fuel rail.
February 11- March 1, 2021 – Cummins investigated the cause of the leaks with the supplier of the rail and
began an investigation of field warranty claims. Cummins conducted an initial Product Safety Hazard Analysis.
March 3 – April 12, 2021 – Cummins escalated the issue through its Product Safety Defect Board process,
gathered additional data and revised the Product Safety Hazard Analysis. Cummins issued a Technical Service
Bulletin (TSB210055) on March 4, 2021 to allow the field to replace rails that have washer leaks with a
different rail and their associated fuel lines. (TSB210055 was submitted to NHTSA on April 7, 2021 in
accordance with 49 CFR Part 579.5.)
April 13, 2021 – Based upon the results of the investigation, Cummins’ Product Defect Safety Board decided to
Part 573 Safety Recall Report 22E-015 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
conduct a safety campaign on engines installed in buses, school buses, emergency vehicle and recreational
vehicle applications.
Description of Remedy :
Description of Remedy Program : A recall-specific reimbursement plan will be provided in the Recall Portal
for those units not covered by the manufacturer’s limited warranty.
The rail threads will be inspected for damage. If damage is found on the
threads, the rail will be replaced with a rail of a different design. The fuel
lines will also be replaced with lines of a different design if the rail is
replaced. If no damage is found on the threads, new crush washers will be
installed.
How Remedy Component Differs
from Recalled Component :
For units having no thread damage, the technician will be instructed to
place a paint dot somewhere on the rail to indicate that the repair has
been completed. For units that do have thread damage, the replacement
rail and fuel lines will have unique part numbers. The replacement rail and
lines are also visibly different.
Identify How/When Recall Condition
was Corrected in Production :
The rail manufacturing statistical process control for the pilot bores was
confirmed in control after October 19, 2020.
Recall Schedule :
Description of Recall Schedule : Cummins expects to notify affected OEMs no later than April 30, 2021.
Cummins will conduct the recall and notify owners. The timing of owner
notification will be determined in consultation with the affected OEMs
Cummins expects to begin sending interim notification letters on June 19,
2021 to owners for which Cummins has received owner addresses. When
Cummins is ready to implement the remedy campaign, Cummins will
notify all owners for which it has received owner information. Owners
who previously received an interim letter notification will receive a
second notification. Cummins anticipates mailing owner letters
communicating the availability of the remedy during July 2021.
Planned Dealer Notification Date : MAR 03, 2022 – MAR 07, 2022
Planned Owner Notification Date : MAR 03, 2022 – MAR 07, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-015 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





