โThis site contains affiliate links for which OEMDTC may be compensatedโ |
May 11, 2022 NHTSA CAMPAIGN NUMBER: 22V325000
An incorrect front brake hose may disconnect, resulting in a loss of brakes and increasing the risk of a crash.
NHTSA Campaign Number: 22V325
Manufacturer Beta USA
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 97
Summary
Beta USA (Beta) is recalling certain 2022 350 RR-S, 390 RR-S, 430 RR-S, and 500 RR-S motorcycles. An incorrect front brake hose was installed during production.
Remedy
Beta will replace the front brake hose, free of charge. Owner notification letters were mailed May 24 2022. Owners may contact Beta customer service at 1-805-226-4035. Beta’s number for this recall is R-2022-1.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Dear Beta RR-S Owner,
This notice is sent to you in accordance with the requirements of the Nation Traffic and Motor Vehicle Safety Act. Beta Motorcycles has decided that a defect which relates to motor vehicle safety exists in certain 2022 350 RR-S, 390 RR-S, 430 RR-S, and 500 RR-S motorcycles, Your vehicle is included in this recall action.
What is the concern?
Certain 2022 model year RR-Sโs motorcycles were manufactured with an assembly mistake where the factory installed the incorrect Front Brake Hose.
Having the incorrect front brake hose installed can lead to the hose not getting enough free play and possibly getting caught onto the speedometer/dash board. This can cause damage to the speedometer/dash board, and possibly disconnect the front brake hose
which could lead to injury or harm.
What will Beta Motorcycles and your Beta Motorcycle retailer do?
Beta Motorcycles is carrying out a recall of the models mentioned above. An authorized Beta Motorcycles retailer will inspect and, if necessary, replace the front brake hose on your unit. There will be no charge for this repair.
What should you do?
Contact your preferred Beta Motorcycles Retailer and provide the retailer with your Vehicle Identification Number (VIN) and request a service date to complete the work required under Recall Code R-2022-1.
How long will it take?
The work will be carried out as quickly and efficiently as possible in order to minimize the inconvenience to customers and is expected to take approximately one (1) hour to complete, although your retailer may need your vehicle for a longer time due to service scheduling requirements and vehicle conditioning.
Attention Leasing Agencies: Federal regulations require that you forward this recall notification to the lessee within TEN (10) days
Moved or no longer own a Beta RR-S?
If you are no longer the owner of this vehicle, Beta Motorcycles would appreciate the name and address of the
new owner (if known), please send an email to support@betausa.com or call (805)-226-4035 ext. 19.
What should you do if you have more questions?
If you have any questions or concerns, please contact the Service Manager at your authorize Beta Motorcycles retailer for assistance. If you have any queries or concerns that your local retailer cannot address, please go to www.betausa.com, select โContact Usโ on the bottom of the site and select Warranty to send a email to our support team or you can call us at (805)-226-4035 Ext 19.
Should you have need to contact Beta Motorcycles by mail, please use the following address.
Beta Motorcycles USA
PO Box 4099
Paso Robles, CA 93446
Chronology :
3/17/2022: Dealer notified our service dept stating bike they received came with incorrect front brake hose.
3/18/2022: Check units at our facility and confirmed they came with incorrect front brake hose. Notified the Factory with the VIN’s and Invoice #’s to help them locate the production run.
3/22/2022: Factory located the production runs that had the incorrect front brake hose installed notified us with a list for us to notify the dealers & customers.
3/28/2022: Received correct front brake hoses to send to dealers.
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
BETA | 350 RR-S | 2022 |
BETA | 390 RR-S | 2022 |
BETA | 430 RR-S | 2022 |
BETA | 500 RR-S | 2022 |
8 Associated Documents
Recall Acknowledgement
RCAK-22V325-1988.pdf 645.742KB
Defect Notice 573 Report
RCLRPT-22V325-1140.PDF 215.313KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V325-8623.pdf 59.392KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22V325-3416.PDF 211.118KB
Manufacturer Notices(to Dealers,etc) – Recall: Incorrect Front Brake Hose on RR-S Models
RCMN-22V325-6696.pdf 549.495KB
Recall 573 Report – 9/28/22
RCLRPT-22V325-7392.PDF 215.372KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22V325-1893.PDF 211.299KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22V325-2937.PDF 211.299KB
Latest Recalls Documents
- Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015
- Complete Double-H Sintered Brake Pad Change Kit includes 2 EBC FA409HH Front Brake Pads and 1 EBC FA409HH Rear Brake Pad
- Double-H Sintered Brake Pads deliver high performance and are well known as the EBC flagship sintered high-performance brake pad
- ECE R 90 brake safety approved and TUV tested, these ultra high friction HH rated brake pads remain a market leader above the rest as nothing else beats the performance of the Double-H Sintered Brake Pad
- Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H Sintered Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles
- Fit For Harley Davidson FLHX Street Glide 2008-2013 | for Street Glide FLHX 2014-2022 | for Street Glide FLHXS Special 15-22 | for Street Glide FLHXSE CVO 21-22 | for FLHTCUTG Tri Glide Ultra Classic Trike 2009-2013 | for Street Glide FLHXXX Trike 10-11 | for V-Rod Brembo
Caliper 2006 | for V-Rod VRSCAW 2007 | for V-Rod VRSCAW Spoke Wheel 2008-2009 | for VRSCDX Night Rod Special Cast Wheel 2007-2017 |for V Rod VRSC 10th Anniversary 2012 | for V-Rod VRSCX 2007 | for V-Rod VRSCF Muscle 2009-2017
- Fits for For Harley FLHR Road King Spoke Wheel 2008-2016 | for Road King FLHR Cast Wheel 2015-2022 | for Road King FLHRC Classic 2008-2020 | for Road King FLHR Special Cast Wheel- Rear Billet Rotor 2021-2022 | for Road Glide FLTR Road Glide 2008-2009 | for Road Glide FLTRX 2015-2022 | for Road Glide FLTRX Limited 2015-2022 | for Road Glide FLTRX Custom 10-12 | for Road Glide FLTRXS Special 15-20 | for Road Glide FLTRXSE CVO 21-22 | Road Glide FLTRU Ultra 11-12 | for Road Glide FLTRU Ultra 2016-2020
- Material: Industry leading ceramic brake compound for improved stopping power, reduced brake fade under prolonged heavy use.
- Brake Pad Set included: 3 pair ceramic brake pad
- Chabushi offer 24 hours customer service and 1 year product service. Please feel free to message if you meet any problem.
- Made using high pressure die cast alluminium platforms with bonded brake linings
- All shoes are radius ground and edge trimmed
- Features lead in and lead out chamfers at lining ends
- Original equipment style brake shoe springs included
- Made using high pressure die cast alluminium platforms with bonded brake linings
- All shoes are radius ground and edge trimmed
- Features lead in and lead out chamfers at lining ends
- Original equipment style brake shoe springs included
- ใFitmentใFit for Harley Davidson Motorcycle โถ Electra Glide FLHT 2008-2020 โถ Night Rod VRSCD 2006-2011 โถ Road Glide FLTR 2008-2020 โถ Road King FLHR 2008-2020
- ใFitmentใ โถ Street Glide FLHX 2008-2020 โถ Street Rod VRSCR 2006-2007 โถ Tri Glide FLHTCUTG 2008-2013 2019-2020 โถ Ultra Limited FLHTK 2014-2020 โถ V-Rod VRSC 2005-2017
- ใMaterialใ1. With copper plating base is good for dissipation 2.Sintered by copper and tin formula compound is designed to any poor condictions.
- ใOEM#ใ41854-08 42850-06 42897-06 42897-08 FA409. ใRepalcement OEM#ใ42850-06A 42897-06A
- ใPackageใBrake Pads Set x 3. Not included instruction manual. Easy to install
- Made using high pressure die cast alluminium platforms with bonded brake linings
- All shoes are radius ground and edge trimmed
- Features lead in and lead out chamfers at lining ends
- Original equipment style brake shoe springs included
- High Quality Material: It has the characteristics of high temperature resistance, stable friction performance, ultra-high braking force, soft friction materials. The brake pads perform well in all harsh riding conditions, including sandy creeks, muddy trails, and rocks, whether dry or wet, to maintain good performance and increase product life.
- Replacement OEM No. FA409 41854-08 42850-06 42897-06 42897-08 42850-06A 42897-06A. Size:91.95x56x7.06mm; Repalcement,Package includes: 6pcs (3 pair) brake pads
- Compatible with Harley: Harley Davidson Motorcycle Electra Glide FLHT 2008-2020, Night Rod VRSCD 2006-2011, Road Glide FLTR 2008-2020, Road King FLHR 2008-2020
- Compatible with Harley: Street Glide FLHX 2008-2020, Street Rod VRSCR 2006-2007, Tri Glide FLHTCUTG 2008-2013 2019-2020 , Ultra Limited FLHTK 2014-2020, V-Rod VRSC 2005-2017
- You will get๏ผ6pcs (3 pair) X Brake Pads. We sell professional parts ๏ผand provide free technical support. If you have any problems , please feel free to contact us. We will try our best to provide you with a satisfactory solution in 12 hours
- All shoes are radius ground and edge trimmed
- Package Dimensions: 15.748 H x 1.016 L x 12.192 W (centimetres)
- Package Weight: 0.227 kilograms
- Country of Origin : Wales
- Made using high pressure die cast alluminium platforms with bonded brake linings
- Made using high pressure die cast aluminum platforms with bonded brake linings
- All shoes are radius ground and edge trimmed
- Features lead in and lead out chamfers at lining ends
- Original equipment style brake shoe springs included
- Fit type: Vehicle Specific
- Premium Brake Pads for Your Motorcycle or ATV: Fit for 2000 2001 2002 2003 XL1200S XL 1200 S Sportster Sport, 2003 XLH883R XLH883 R 100th Anniversary Edition, 2000-2003 Dyna Series FXDX Super Glide Sport, 2000-2003 Dyna Series FXDL Low Rider, 2000-2003 Dyna Series FXDWG Wide Glide, 2000 2001 2002 Dyna Series FXDS-CON Dyna Convertible, 2001 2002 2003 Dyna Series FXDXT Superglide T-Sport, 2004-2005 Dyna Series FXDXi Super Glide Sport; 2000-2007 Touring FLHRi/FLHR Road King
- High Performance Braking: Our brake pads are made of carbon fiber materials and are designed to provide superior stopping power, ensuring you can quickly stop your motorcycle or ATV when you need to.
- Quiet and Durable: ECCPP brake pads are designed to be quiet and long-lasting, so you can enjoy a smooth and noise-free ride while also getting the most out of your investment
- Easy to Install: Installing our brake pads is a breeze, and can be done by anyone without the need for any special tools. We've designed our brake pads to fit perfectly onto your motorcycle or ATV, so you can get back on the road in no time
- Note: Please check the levers "title" or "products description" to for Make sure that this model type and model year work for your vehicle before ordering
SEOCONTENT-START
May 2022 Safety Recall R-2022-1:Incorrect Front Brake Hose on RR-S Models Model Year / Motorcycle Affected: 2022 Beta 350 RR-S, 390 RR-S, 430 RR-S, & 500 RR-S National Highway Traffic Safety Administration Recall Number: 22V325 Dear Beta RR-S Owner, This notice is sent to you in accordance with the requirements of the Nation Traffic and Motor Vehicle Safety Act. Beta Motorcycles has decided that a defect which relates to motor vehicle safety exists in certain 2022 350 RR-S, 390 RR-S, 430 RR-S, and 500 RR-S motorcycles, Your vehicle is included in this recall action. What is the concern? Certain 2022 model year RR-Sโs motorcycles were manufactured with an assembly mistake where the factory installed the incorrect Front Brake Hose
. Having the incorrect front brake hose
installed can lead to the hose not getting enough free play and possibly getting caught onto the speedometer/dash board. This can cause damage to the speedometer/dash board, and possibly disconnect the front brake hose
which could lead to injury or harm. What will Beta Motorcycles and your Beta Motorcycle retailer do? Beta Motorcycles is carrying out a recall of the models mentioned above. An authorized Beta Motorcycles retailer will inspect and, if necessary, replace the front brake hose
on your unit. There will be no charge for this repair. What should you do? Contact your preferred Beta Motorcycles Retailer and provide the retailer with your Vehicle Identification Number (VIN) and request a service date to complete the work required under Recall Code R-2022-1. How long will it take? The work will be carried out as quickly and efficiently as possible in order to minimize the inconvenience to customers and is expected to take approximately one (1) hour to complete, although your retailer may need your vehicle for a longer time due to service scheduling requirements and vehicle conditioning. Important Safety RecallThis notice applies to your vehicle VIN: Attention Leasing Agencies: Federal regulations require that you forward this recall notification to the lessee within TEN (10) days Moved or no longer own a Beta RR-S? If you are no longer the owner of this vehicle, Beta Motorcycles would appreciate the name and address of the new owner (if known), please send an email to support@betausa.com or call (805)-226-4035 ext. 19. What should you do if you have more questions? If you have any questions or concerns, please contact the Service Manager at your authorize Beta Motorcycles retailer for assistance. If you have any queries or concerns that your local retailer cannot address, please go to www.betausa.com, select โContact Usโ on the bottom of the site and select Warranty to send a email to our support team or you can call us at (805)-226-4035 Ext 19. Should you have need to contact Beta Motorcycles by mail, please use the following address. Beta Motorcycles USA PO Box 4099 Paso Robles, CA 93446 If you are having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write to. Administrator, National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, D.C. 20590 Or you may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY. 1-800-424-9153), or log on to http:// NHTSA.gov to submit a complaint electronically Thank you again for selecting Beta Motorcycles, your ownership experience is very important to us. We recognize this service visit may be an inconvenience to you. Beta Motorcycle, in cooperation with your authorized Beta Motorcycles retailer, will strive to minimize any inconvenience to you caused by this recall. Sincerely, Casey Ortega Support Manager
**************************************************************************************************************
Recall: Incorrect Front Brake Hose on RR-S Models R-2022-1May, 2022 Confidentiality Notice: This message (including attachments) contains information that may be confidential and is for authorized Beta Dealerโs use only Models Effected:2022 350-500 RR-S 4-Strokes Problem: A batch of 2022 RR-S 4-Strokes have come with the incorrect front brake hose
installed.Solution: Inspect units for the incorrect front brake hose
, and if needed replace. Correct Correct
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-325 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Beta USA Submission Date : SEP 28, 2022 NHTSA Recall No. : 22V-325 Manufacturer Recall No. : R-2022-1 Manufacturer Information : Manufacturer Name : Beta USA Address : PO box 4099 Paso Robles CA 93447 Company phone : 805-226-4035 Population : Number of potentially involved : 97 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Beta 350 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2022 Beta 390 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose
installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-325 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Vehicle 3 : 2022-2022 Beta 430 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose
installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2022-2022 Beta 500 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose
installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The factory installed the incorrect front brake hose
during production. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Having the incorrect front brake hose
installed can lead to the hose not getting enough free play and possibly getting caught onto the speedometer/ dash board. This can cause damage to the speedometer/dash board, and possibly disconnect the front brake hose
which could lead to injury or harm. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-325 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Front Brake Hose
Component Description : Front Brake Hose
Component Part Number : 037-360020-000 Supplier Identification : Component Manufacturer Name : Beta Motor SPA Address : Pian dell’ Isola, 72 Rignana Sull Arno Foreign States 50067 Country : Italy Chronology : 3/17/2022: Dealer notified our service dept stating bike they received came with incorrect front brake hose
. 3/18/2022: Check units at our facility and confirmed they came with incorrect front brake hose
. Notified the Factory with the VIN’s and Invoice #’s to help them locate the production run. 3/22/2022: Factory located the production runs that had the incorrect front brake hose
installed notified us with a list for us to notify the dealers & customers. 3/28/2022: Received correct front brake hoses to send to dealers. Description of Remedy : Description of Remedy Program : Beta will notify the owners and replace the front brake hose
free of charge. Our factory has sent all the replacements to our facility to send to dealers. How Remedy Component Differs from Recalled Component : You can tell by the part number listed on the brake hose
it will read 29.09108.000 appose to the recalled # 37.36.002.00.00. You can also tell by how the front brake hose
connects to the Master Cylinder on the handler bars. The remedy component has a slight bend to the hose where it installs to the master cylinder as the recalled will go straight directly in. Identify How/When Recall Condition was Corrected in Production : We notified the factory on 3/18/2021 and they were able to locate the productions that had the incorrect brake hose
installed and replaced them all. Recall Schedule : Description of Recall Schedule : Dealer will be emailed from constant contact, and a recall bulletin will be Part 573 Safety Recall Report 22V-325 Page 4 The information contained in this report was submitted pursuant to 49 CFR ยง573 posted to our dealer website. For the customers we will be sending out a letter to their address. Planned Dealer Notification Date : MAY 16, 2022 – MAY 16, 2022 Planned Owner Notification Date : MAY 17, 2022 – MAY 20, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-325 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Beta USA Submission Date : MAY 11, 2022 NHTSA Recall No. : 22V-325 Manufacturer Recall No. : R-2022-1 Manufacturer Information : Manufacturer Name : Beta USA Address : PO box 4099 Paso Robles CA 93447 Company phone : 805-226-4035 Population : Number of potentially involved : 97 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Beta 350 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2022 Beta 390 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose
installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-325 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Vehicle 3 : 2022-2022 Beta 430 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose
installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2022-2022 Beta 500 RR-S Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : We had a shipment of bikes show with the incorrect front brake hose
installed. We notified the factory and were able to look at production build sheets and noticed two runs where built with the incorrect front brake hose
part number listed. There was 97 units affected with a combination of 2022 350 RR-S, 2022 390 RR-S, 2022 430 RR-S, and 2022 500 RR-S. Production Dates : DEC 03, 2021 – DEC 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The factory installed the incorrect front brake hose
during production. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Having the incorrect front brake hose
installed can lead to the hose not getting enough free play and possibly getting caught onto the speedometer/ dash board. This can cause damage to the speedometer/dash board, and possibly disconnect the front brake hose
which could lead to injury or harm. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-325 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Front Brake Hose
Component Description : Front Brake Hose
Component Part Number : 037-360020-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 3/17/2022: Dealer notified our service dept stating bike they received came with incorrect front brake hose
. 3/18/2022: Check units at our facility and confirmed they came with incorrect front brake hose
. Notified the Factory with the VIN’s and Invoice #’s to help them locate the production run. 3/22/2022: Factory located the production runs that had the incorrect front brake hose
installed notified us with a list for us to notify the dealers & customers. 3/28/2022: Received correct front brake hoses to send to dealers. Description of Remedy : Description of Remedy Program : Beta will notify the owners and replace the front brake hose
free of charge. Our factory has sent all the replacements to our facility to send to dealers. How Remedy Component Differs from Recalled Component : You can tell by the part number listed on the brake hose
it will read 29.09108.000 appose to the recalled # 37.36.002.00.00. You can also tell by how the front brake hose
connects to the Master Cylinder on the handler bars. The remedy component has a slight bend to the hose where it installs to the master cylinder as the recalled will go straight directly in. Identify How/When Recall Condition was Corrected in Production : We notified the factory on 3/18/2021 and they were able to locate the productions that had the incorrect brake hose
installed and replaced them all. Recall Schedule : Description of Recall Schedule : Dealer will be emailed from constant contact, and a recall bulletin will be Part 573 Safety Recall Report 22V-325 Page 4 The information contained in this report was submitted pursuant to 49 CFR ยง573 posted to our dealer website. For the customers we will be sending out a letter to their address. Planned Dealer Notification Date : MAY 16, 2022 – MAY 16, 2022 Planned Owner Notification Date : MAY 17, 2022 – MAY 20, 2022 * NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.