Incorrectly Labeled GAWR – 2021-2023 Bwise EA10-10 & EA10-12 All Access Trailers

August 5, 2022 NHTSA CAMPAIGN NUMBER: 22V587000

Incorrectly Labeled GAWR/Part 567

An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

 

NHTSA Campaign Number: 22V587

Manufacturer Bwise Manufacturing

Components EQUIPMENT

Potential Number of Units Affected 76

 

Summary

Bwise Manufacturing (Bwise) is recalling certain 2021-2023 EA10-10 and EA10-12 All Access trailers. The GAWR of the trailer was incorrectly labeled at 4,995 lbs. and should be labeled 6,000lbs. As such, these vehicles fail to comply with the requirements of 49 CFR Part number 567, “Certification.”

 

Remedy

Dealers will mail new labels and instructions on how to replace it, free of charge. Owner notification letters were mailed on September 6, 2022. Owners may contact Bwise’s customer service at 1-717-261-0922.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

Incorrect data entry caused a misprint on the VIN labels. The error was discovered during a routine audit on June 30, 2022 and corrected. There is only one dealer who received all 76 units that were affected. They were contacted immediately by telephone and provided replacement labels for the 18 trailers still in their possession. After review and consideration of the accuracy of the labels, it was determined that a recall would be the most prudent course of action to get all incorrect labels replaced for the customers. There have been no reported warranty claims or customer complaints related to the misprinted labels.

 


3 Affected Products

Vehicle

MAKEMODELYEAR
BWISEDUMP TRAILER2021-2023

 


7 Associated Documents

Recall Acknowledgement

RCAK-22V587-7203.pdf 646.333KB

 


Non-Compliance Notice 573 Report

RCLRPT-22V587-8655.PDF 213.341KB

 


Recall 573 Report- 08/22/2022

RCLRPT-22V587-2433.PDF 213.685KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V587-1905.pdf 347.874KB

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V587-2130.PDF 211.116KB

 


Recall Quarterly Report #2, 2022-4

RCLQRT-22V587-9828.PDF 211.217KB

 


Recall Quarterly Report #3, 2023-1

RCLQRT-22V587-5242.PDF 211.295KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V587&docType=RCL

 


 

SaleBestseller No. 1
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern
  • 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Bestseller No. 2
RV MURTS Trailer Axle Kit 3500 lbs, 73" Hubface - 58" Spring Center, Leaf Spring Tandem Suspension, U Bolt, Hanger, Shackle for Boat Trailer, RV
  • Compatibility. Trailer axle kit for 3,500lb cargo trailer, 73" hubface - 58" spring center(reference from P2), impressive support to wheels and shock absorbent for RV campereBay logo, pack with spring, U-bolt, hanger and shackle kit for replacement.1
  • Trailer Axle Parts Oulet. Maximum distance between spring center is 18'', between hubface is 14'', 5 bolt on 4.5 pattern trailer hub, replace the axle with prominent steel-made, provide better support to thefor 3500 lbs cargo trailer.
  • Trailer Leaf Spring. Confirm the measurement for sure fit, eye to eye length: 25-1/4 inch; free open: 3 inch; width of leaf: 1-3/4 inch; 4 leaves; 9/16 inch bushing dia, OEM reference: SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184.
  • Includes. Tandem trailer leaf spring kit included compatible 4 U-bolts feature 5-1/2'' long, 1/2'' dia, 2 tie plates and 8 hex nuts, 4 hangers, 4pcs 3-1/8" shackle straps and necessary locknuts and shackle bolts for one package easy replacement.
  • Durability. Trailer axle springs constructed with prominent steel with anti-corrosion coating, DOT qualified hardware and accessories improve the suspension system for long time and long distance journey in years.
SaleBestseller No. 3
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern
  • 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Bestseller No. 4
dreamdragon 3500 lbs Trailer Axle with 5-Lug 4.5'' Hubs - 73" Hubface 58" Spring Center
SaleBestseller No. 5
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern
  • 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More

Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...