22E085 – C22AJ – Tie Rod Clamp Failure – Meritor Front Non-Drive Steer Axles

September 30, 2022 NHTSA CAMPAIGN NUMBER: 22E085000

Tie Rod Clamp Failure

Tie rod separation can result in a sudden loss of steering, increasing the risk of a crash.

 

NHTSA Campaign Number: 22E085

Manufacturer MeritoreBay logo, Inc.

Components STEERING

Potential Number of Units Affected 1,601

 

Summary

MeritoreBay logo, Inc. (MeritoreBay logo) is recalling certain Front Non-Drive Steer Axles, FL941 & MFS Series. The tie rod clamps may have been improperly heat-treated, causing them to crack and allowing the tie rods to separate.

 

Remedy

MeritoreBay logo will work with the affected manufacturers to replace the tie rod clamps, free of charge. Owners may contact MeritoreBay logo customer service at 1-866-668-7221. MeritoreBay logo’s number for this recall is C22AJ.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

6/27/2022 – MeritoreBay logo’s supplier shared an 8D related to the supplier’s investigation into cracks on tie rod clamps

7/5 – 7/29/2022 – MeritoreBay logo’s engineering team developed and finalized a technical position regarding the cracked clamps issue.

7/28/2022 – MeritoreBay logo’s PSAC council reviewed the technical position paper and decided to communicate the issue to its customers as a customer satisfaction issue.

9/16/2022 – Autocar, LLC filed a Part 573 Defect Information Report (DIR) related to this condition. See Recall No. 22V697.

9/22/2022 – NavistareBay logo filed a Part 573 Defect Information Report related to this condition. See Recall No. 22V711.

9/30/2022 – Based upon the Part 573 DIRs submitted by Autocar and NavistareBay logo, MeritoreBay logo decided to file this DIR in accordance with 49.C.F.R. 573.3(f).

MeritoreBay logo is not aware of any accidents or injuries related to this condition.

 


1 Affected Product

Equipment

BRANDPART NO.PRODUCTION DATES
MERITOReBay logoFRONT NON DRIVE STEER AXL

 


2 Associated Documents

Recall Acknowledgement

RCAK-22E085-6013.pdf 645.76KB

 


Defect Notice 573 Report

RCLRPT-22E085-3593.PDF 216.469KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
Yonligonju Inner Tie Rod Removal Tool, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters & 1/2 Inch Drive Tube for Tie Rods Remove & Install Suitable for Domestic & Import Cars(Blue)
  • Universal Compatibility:This Inner Tie Rod Removal Kit is designed to fit most domestic and imported vehicles, including cars, pickups, and SUVs. It allows for the safe and efficient removal and installation of inner tie rods without the need to remove the rack and pinion, saving you time and effort during vehicle maintenance.
  • The precision - crafted sliding ring ensures a firm hold on the crowfoot adapter, guaranteeing it won't bend during operation. Additionally, tie rods fit perfectly into the adapter, centering precisely on the tool for optimal performance.
  • Inner Tie Rod Removal Kit: The kit comes with 12 crowfoot adapters in the most common SAE and metric sizes. These sizes include 1 - 3/16", 1 - 1/4", 1 - 5/16", 1 - 3/8", 1 - 7/16", 1 - 1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm. This wide range of sizes ensures that you can handle any inner tie rod job quickly and efficiently, meeting all your vehicle repair needs.
  • Solid Construction:Our drawbar tool features a 1/2 - inch drive rod made of high - quality steel. It has been heat - treated and coated with oxide, which not only makes it extremely durable but also highly resistant to damage. It is also compatible with a 1/2" drive wrench for easy use.
  • Complete and Portable Set:This Inner Tie Rod Removal Kit is a complete set that includes a rod, 12 adapters, and a portable case. All the tools are neatly stored and fixed in the case, making it easy to store and carry. Whether you are a professional mechanic or a DIY car enthusiast, this set is a convenient and practical addition to your tool collection.
Bestseller No. 2
CXPRO Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube for Tie Rods Remove & Install Cars
  • 【Inner Tie Rod Removal Set】Handy mechanic tool set easily removes & installs inner tie rods without removing the rack and pinion.12pcs Adapters Included Size 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm. Fits inner tie rods from 1-3/16 inches to 42 mm, ensuring compatibility with most vehicles.
  • 【Easy Handling with 1/2-Inch Drive Tube】 The tie rod end puller in the kit features a 1/2-inch drive tube handle. This design makes it effortless to grip and maneuver, providing excellent control and leverage while removing and reinstalling tie rod ends. DO NOT USE IMPACT WRENCH.
  • 【Versatility】With 13 pieces, including crowfoot adapters and a 1/2-inch drive tube, this tool kit offers versatility to tackle various inner tie rod sizes and configurations. It ensures compatibility with a wide range of vehicles. Its knurled grip keeps you in total control at all times
  • 【High-Quality Construction】Constructed from AISI 1045 medium carbon steel, this tie-rod removal set boasts admirable strength and will give you corrosion-proof service for years. The sturdy construction can withstand the demands of frequent use, providing reliable and consistent results.
  • 【Easy Storage】A rugged carrying case is included to keep all tool components neatly organized and stored. As a complete professional set, portable 13-piece master inner tie rod tools deliver the performance demanded by automotive shops and DIY mechanics alike.
SaleBestseller No. 3
Orion Motor Tech Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool for Tie Rod Removal and Installation, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube
  • INNER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion; the 1/2 Inch drive tube handle with a 2.1 in inner diameter allows servicing on small cars, pick-ups, and SUVs
  • 12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm
  • UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit; works on inner tie rods with inaccessible wrench flats
  • SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength; the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters
  • HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use; select the right adapter, slide it over the tie rod, click the tool and adapter together, then use a 1/2 inch ratchet or impact wrench to remove the rod
Bestseller No. 4
Bicos Inner Tie Rod Removal Tool Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube for Tie Rod Removal and Installation
  • 【Premium Construction for Long-Lasting Durability】 Inner Tie Rod Tool Kit is built from high-strength steel, ensuring superior durability even under heavy use. Its reinforced tool wall minimizes the risk of breakage, making it the ideal choice for professional mechanics and DIY enthusiasts who demand reliability for tough jobs.
  • 【Precision Engineering for Secure Fit】 Designed with precision in mind, Inner Tie Rod Tool Kitfeatures a sliding ring mechanism that securely holds the crowfoot adapter in place, preventing any bending or slippage during operation. Tie rods remain centered and stable, ensuring an efficient and accurate removal and installation process.
  • 【Effortless Tie Rod Removal & Installation】 This heavy-duty inner tie rod tool allows for quick and easy removal and installation of inner tie rods without the need to disassemble the rack and pinion, significantly streamlining your vehicle maintenance tasks and saving time on repairs.
  • 【Simple & User-Friendly Operation】 Select the correct adapter and slide it onto the inner tie rod. Attach the tube to the tie rod. Align the slot and rotate the collar to securely lock the adapter in place. Insert a 1/2" drive tool into the hole to easily remove the tie rod. This easy-to-follow process ensures smooth and efficient use every time.
  • 【 Wide Compatibility with Multiple Vehicle Sizes】 The Inner Tie Rod Tool Kit includes 12 Crowfoot adapters, ranging from 1-3/16" to 42 mm, ensuring compatibility with a wide variety of vehicles. Sizes included are: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm, covering most car makes and models.
Bestseller No. 5
limontek Inner Tie Rod Removal Tool, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters & 1/2 Inch Drive Tube for Tie Rods Remove & Install (Blue)
  • Solid Construction -- Crafted from high-strength steel, this tie rod tool kit is built to last through frequent use, thickened tool wall to prevent it from breaking.
  • Professional craftsmanship -- Precision sliding ring holds the crowfoot adapter tightly in place, the adapter will not bend during use. Tie rods fit snugly into the adapter and are centered on the tool.
  • Easy Removal & Installation -- The heavy-duty steel inner tie rod tool allows removal and installation of inner tie rods without disassembling the rack and pinion for simplified maintenance. DO NOT USE IMPACT WRENCH.
  • How to Use -- 1. Select the correct adapter and slip it over the inner tie rod. 2. slide the tube onto the tie rod. 3. Align the slot, then rotate the collar to lock the adapter in place. 4. Insert the 1/2" drive tool into the end hole and remove the tie rod.
  • Popular Size Coverage -- 12pcs Crowfoot Adapters Included Size 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm. Fits inner tie rods from 1-3/16 inches to 42 mm, ensuring compatibility with most vehicles.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...