Deteriorating Rubber May Cause Axle Misalignment – 2022-2023 Innovative Specialties Nitro & Edge Trailers

October 19, 2022 NHTSA CAMPAIGN NUMBER: 22V783000

Deteriorating Rubber May Cause Axle Misalignment

Deteriorated rubber may allow the axle to shift, causing a misalignment and increasing the risk of a crash.

 

NHTSA Campaign Number: 22V783

Manufacturer Innovative Specialties LLC

Components SUSPENSION

Potential Number of Units Affected 630

 

Summary

Innovative Specialties LLC (Innovative Specialties) is recalling certain 2022-2023 Nitro and Edge trailers. The rubber installed between the axle and trailer frame may deteriorate.

 

Remedy

Dealers will remove the rubber and bolt the axle directly to the frame, free of charge. Owner notification letters were mailed December 13, 2022. Owners may contact Innovative Specialties customer service at 1-207-487-2300 or [email protected].

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to www.nhtsa.gov.

 


This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Innovative Specialties has decided that a defect which relates to motor vehicle safety exists in certain model year 2022-2023 Nitro and Edge SC, SCC, SCH, SIS, NC, NCH, NCHCC, NIS, OCH, and DT trailers. Please note that the defect may not exist in all such vehicles 

 

Why is a recall being conducted?  We have determined that a rubber barrier between the axle and trailer frame could deteriorate which could potentially cause the axle to become misaligned and cause potential sway and or loss of control that could result in a motor vehicle crash without warning.

 

What are we doing about the problem? The rubber barrier between the frame and the axle is not a necessary component and will be removed. This remedy will be provided at no cost to you and after scheduling your trailer for an evaluation it should take approximately 1 hour for this remedy to be completed. The remedy for this recall will be available as of 11/1/2022

 

What should you do? Please contact your closest Nitro or Edge dealer to schedule a free evaluation to see if your trailer is affected. A complete list of dealers can be found on our websites www.nitrotrailers.com or www.edgetrailer.com. It is advised that owners act upon this issue before continued use to avoid or reduce the safety related risk associated with this defect.

 

What if you have already paid for repairs to your trailer to remedy this defect? You may be eligible for reimbursement of the charges you paid for the repair. To learn more about what you need to do to obtain reimbursement, call (207-487-2300).

 

What if I no longer own the trailer? Please email the new owner’s information to us at [email protected]

 

Who should you contact if you have further questions or concerns? Please contact your closest Nitro or Edge dealer for assistance or questions you may have.

 

If you are the lessor of this vehicle, please forward a copy of this notice to the lessee within ten days to comply with federal regulations.

If after having attempted to take advantage of this recall you believe you have not been able to have your trailer remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800424-9153) or go to http://www.safecar.gov

As a manufacturer we pride ourselves in building high quality trailers using the highest quality of components, to ensure you have the best experience with your product. Just like a trailer, you can be sure we, as a manufacturer, are right behind you when it comes to our product, the safety of our product and its use  and taking care of any issue that may arise throughout your trailer’s warranty period.

 


Chronology :

On 9/9 customer reported to dealer that their tires were showing abnormal tire wear. Upon evaluation by the dealer they had determined the rubber barrier placed between the axle and the frame had shown wear or deterioration which could cause the axles to be mid-aligned. All bolts and nuts were inspected which led to the belief the rubber barrier could potentially be the issue. Dealer then notified us about the potential concern. We had monitored the situation and after field inspection of multiple units we then decided that this could be a potential issue moving forward and out of precaution it was deemed the rubber barrier was not even necessary.

On 10/17/22 we had then decided we would seek recall advice and at that point open our NHTSA claim.

There have been no known reports of accidents, deaths or injuries related to this recall.

 


24 Affected Products

Vehicles

MAKEMODELYEAR
EDGE TRAILERSDT2022-2023
EDGE TRAILERSNC2022-2023
EDGE TRAILERSNCH2022-2023
EDGE TRAILERSNCHCC2022-2023
EDGE TRAILERSOCH2022-2023
NITRO TRAILERSDT2022-2023
NITRO TRAILERSNIS2022-2023
NITRO TRAILERSOCH2022-2023
NITRO TRAILERSSC2022-2023
NITRO TRAILERSSCC2022-2023
NITRO TRAILERSSCH2022-2023
NITRO TRAILERSSIS2022-2023

 


9 Associated Documents

Recall Acknowledgement

RCAK-22V783-5040.pdf 646.1KB

 


Defect Notice 573 Report

RCLRPT-22V783-4659.PDF 214.338KB

 


Recall 573 Report – 10/24/2022

RCLRPT-22V783-8793.PDF 215.271KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V783-6512.pdf 174.579KB

 


Owner Notification Letter(Part 577)

RCONL-22V783-9850.pdf 193.431KB

 


Recall Quarterly Report #1, 2022-4

RCLQRT-22V783-7496.PDF 211.136KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V783-0529.pdf 437.964KB

 


Recall Quarterly Report #2, 2023-1

RCLQRT-22V783-3888.PDF 211.238KB

 


Recall Quarterly Report #3, 2023-2

RCLQRT-22V783-8740.PDF 211.317KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V783&docType=RCL

 


 

SaleBestseller No. 1
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern
  • 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Bestseller No. 2
RV MURTS Trailer Axle Kit 3500 lbs, 73" Hubface - 58" Spring Center, Leaf Spring Tandem Suspension, U Bolt, Hanger, Shackle for Boat Trailer, RV
  • Compatibility. Trailer axle kit for 3,500lb cargo trailer, 73" hubface - 58" spring center(reference from P2), impressive support to wheels and shock absorbent for RV campereBay logo, pack with spring, U-bolt, hanger and shackle kit for replacement.1
  • Trailer Axle Parts Oulet. Maximum distance between spring center is 18'', between hubface is 14'', 5 bolt on 4.5 pattern trailer hub, replace the axle with prominent steel-made, provide better support to thefor 3500 lbs cargo trailer.
  • Trailer Leaf Spring. Confirm the measurement for sure fit, eye to eye length: 25-1/4 inch; free open: 3 inch; width of leaf: 1-3/4 inch; 4 leaves; 9/16 inch bushing dia, OEM reference: SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184.
  • Includes. Tandem trailer leaf spring kit included compatible 4 U-bolts feature 5-1/2'' long, 1/2'' dia, 2 tie plates and 8 hex nuts, 4 hangers, 4pcs 3-1/8" shackle straps and necessary locknuts and shackle bolts for one package easy replacement.
  • Durability. Trailer axle springs constructed with prominent steel with anti-corrosion coating, DOT qualified hardware and accessories improve the suspension system for long time and long distance journey in years.
SaleBestseller No. 3
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern
  • 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Bestseller No. 4
dreamdragon 3500 lbs Trailer Axle with 5-Lug 4.5'' Hubs - 73" Hubface 58" Spring Center
SaleBestseller No. 5
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern
  • 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More

Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...