March 1, 2018 NHTSA CAMPAIGN NUMBER: 18E011000
Welds Can Crack Causing Bikes to Detach
If a portion of the rack and the attached bicycles separate from the vehicle, they can become a road hazard, increasing the risk of a crash.
NHTSA Campaign Number: 18E011
Manufacturer RockyMounts
, Inc.
Components EQUIPMENT
Potential Number of Units Affected 565
Summary
RockyMounts, Inc. (RockyMounts) is recalling certain Split Rail 1.25″ bicycle racks, part number 11300, MonoRail 2″ bicycle racks, part number 10004, SplitRail 2″ bicycle racks, part number 11400, and MonoRail 1.25″ bicycle racks, part number 10003. The weld that attaches the hitch tube to the pivot bracket may crack and fail allowing the upper portion of the rack with the bicycles attached to separate from the vehicle.
Remedy
RockyMounts will notify owners and will provide a new rack base, free of charge. The recall began on March 8, 2018. Owners may contact RockyMounts customer service at 1-303-402-0190.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY Recall Notice
March 22, 2018
Attention RockyMounts MonoRail and SplitRail customers: This notice is being sent in accordance with the National Traffic and Motor Vehicle Safety Act. RockyMounts Inc. has identified a potential welding defect with some MonoRail and SplitRail hitch racks manufactured between 2017 and August 2018. In some cases, the weld is insufficient and could lead to failure. Stop using the rack immediately and check your rack. This affects both 1.25” and 2” models.
If your rack has no marking, it is being recalled. If it is labeled Rev H, I, J it is OK. If your rack is affected, please visit https://www.rockymounts.com/pages/recall-notices to obtain a new base. Bases will be shipped at no cost to the customer.
Safety for our customers and your bicycles is a priority. We have received reports of less than 1% with weld issues and are taking steps to ensure all the products meet our requirements. We sincerely apologize for problem and appreciate your cooperation.
If you have any questions or concerns, please call us at 303-402-0190 or email ride@rockymounts.com with your questions or concerns. If we are unable to remedy the issue at no charge within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave, SE, Washington, DC 20590 or call the toll free Safety Hotline at 888-327-4236 (TTY: 1–800–424–9153); or go to https://www.safercar.gov.
4 Affected Products
Equipments
| ROCKYMOUNTS | BIKE RACK-MONORAIL 1.25″ | 11/01/2016 – 07/31/2017 |
| ROCKYMOUNTS | BIKE RACK-MONORAIL 2″ | 11/01/2016 – 07/31/2017 |
| ROCKYMOUNTS | BIKE RACK-SPLIT RAIL 1.25 | 04/01/2016 – 08/31/2017 |
| ROCKYMOUNTS | BIKE RACK-SPLITRAIL 2″ | 03/23/2016 – 08/31/2017 |
8 Associated Documents
Defect Notice 573 Report
RCLRPT-18E011-3657.pdf 218.132KB
ISSUED Owner Notification Letter(Part 577)
RCONL-18E011-0915.pdf 2006.061KB
Recall Quarterly Report #1, 2018-1
RCLQRT-18E011-1934.PDF 211.219KB
Recall Quarterly Report #2, 2018-2
RCLQRT-18E011-5411.PDF 211.219KB
Recall Quarterly Report #3, 2018-3
RCLQRT-18E011-6041.PDF 211.304KB
Recall Quarterly Report #4, 2018-4
RCLQRT-18E011-2449.PDF 211.414KB
Recall Quarterly Report #5, 2019-1
RCLQRT-18E011-0013.PDF 211.523KB
Recall Quarterly Report #6, 2019-2
RCLQRT-18E011-2641.PDF 211.616KB
Latest Recalls Documents
- ⚠️ PLEASE CHECK YOUR TIRE SIZE FIRST: Designed to accommodate standard leisure bicycles, securely fitting wheel sizes from 12 inches (toddler bikes) up to 26 inches (adult commuters) with a maximum tire width of 2.5 inches. Important Note: This rack is NOT compatible with 29-inch mountain bikes or oversized "fat tire" e-bikes; tipping or warping of spokes may occur
- 5-BIKE ADJUSTABLE RACK: Features 5 vertical sections to securely park up to 5 bicycles side by side. Each rung can be flipped to meet different orientation needs, allowing you to alternate front and rear wheels to prevent the handlebars from getting jammed
- HEAVY-DUTY STEEL CONSTRUCTION: Manufactured with high-quality steel that enhances stability against the wind and other outdoor elements, keeping your bikes perfectly upright
- SIMPLE INSTALLATION: The heavy-duty bottom frame snaps together, while the vertical bike slots easily secure with just a standard Phillips screwdriver
- DIMENSIONS & SPACING: Overall Rack Size: 14.5" D x 71.5" W x 14" H. Compartment Width: Each of the 5 individual bike slots is exactly 8" W, providing plenty of breathing room between frames to prevent scratches
- 360° Lockable Rolling Wheels: With four 360° lockable rolling wheels, this freestanding garage bike rack allows you to easily move your bike stand across rooms, garages, patios, or storage areas. The casters are lockable to prevent unwanted sliding and share the load of the rack, reducing strain during repositioning. Designed for stability, this bike rack for garage helps prevent your bike from tipping over, making it a secure and convenient bike holder for any space.
- Wide Range of Compatibility: Sttoraboks vertical bicycle rack fits most bike tire widths and can hold mountain bikes with a maximum tire width of 4". Compatible with 24"-29" kids bikes, mountain bikes, and road bikes. The rack supports bikes up to 55lb / 25kg. The height of the lifting and retracting rods can be freely adjusted without fixed preset positions, offering optimal storage storage for the bike. Note: Doesn't work for bikes with fenders, baskets, or stands.
- Freestanding Bike Rack – No Drilling Needed: Unlike wall-mounted bicycle racks for garage, this upright floor stand requires no drilling or wall damage. Quick assembly with the included manual takes just minutes. Great for renters or anyone seeking a tidy garage bike storage solution without the mess. Maintain your walls while organizing your gear with this practical, movable garage freestanding bike rack.
- Stable Triangular Structure: Built with adjustable V-shaped brackets and reinforced seatpost support, this bike stand for garage forms a reliable triangular structure. Velcro straps further stabilize the front wheel and seatpost, ensuring your bike stays in place. Made from heavy-duty powder-coated steel, it’s rustproof, long-lasting, and ideal for indoor or garage storage in any season.
- Perfect for Apartments, Garages, and Sheds：This bike rack is perfect in small spaces like apartments, offices, and garages and inside a shed paired with storage racks or ball storage. It fits corners. A smart addition to bike storage garage system, you can also pair it with a bike cover (not included) for added protection. Whether you need a garage bike rack setup, we offer professional customer service to ensure your satisfaction.
- Heavy-Duty Upgraded Steel Frame for Enhanced Stability: Built with 0.63" thick steel tubes (upgraded from 0.47") for superior strength. This floor bike rack securely holds up to 5 bikes (12"–29", max 2.4" wide) for indoor or garage storage
- Disc Brake & Rear Derailleurs Friendly: Smartly - designed bike holder extension won't hit disc brakes or rear derailleurs, keeping your bikes safe. Unique Patented Design, US D1,086,953 S
- Adjustable Buckles for All Bike Types: Separate adjustable buckles let you move holders up or down to fit most bikes—12"–20" kids, 20"–24" BMX, 26"–29" MTB, 700c road bikes. Max tire width: 2.4"
- Reinforced Base for Stability & Space-Saving Parking: Sturdy base plates prevent wheel holders from widening at the top, ensuring bikes stay upright and stable. Alternate bike directions to fit up to 5 bikes, or park from both sides for more space
- Quality & Weather-Resistant Build: High-quality steel frame with waterproof coating ensures durability in all weather. Ground-locking design keeps the bike stand stable on any surface, indoors or outdoors
- 【High Quality Materials and Construction】The bike rear rack is made of high quality hard Aluminum Alloy.This material is so light that it won't put a big load on your bike; In addition, the high-strength aluminum alloy is again so strong that it can easily carry up to 115 pounds;
- 【Large Size Reflector And Adjustable Fender】The large size bicycle reflector to increase visibility on the night cycling and ensure your night cycling safety.The adjustable and removable fender to keep your back,bags or panniers dry and clean when cycling on rainy day or muddy road!
- 【High Quality Screws】The bike cargo rack Equipped with stainless steel screws and anti-loosening&shock-proof nuts ensure the bike rack will not go loose on rough road or get rusty after light rains!
- 【Enlarged Side Wings 】The enlarged side wings on both sides efficiently protect the panniers or bags from getting into the bike spokes or scratching by the wheels.
- 【Adjustable Structure】The top panel is adjustable from 16"-18" in length;the telescopic side support rods can be stretched from 11"-15.75".The adjustable structure allows you adjust the length and height of the bicycle luggage rack as you needed to fit most of bicycles(bike seat tube needs 2 inches high and Seat Tube Diameter 2.2-3.3 cm / 0.85-1.3").
- [SOME BICYCLES WILL REQUIRE ADDITIONAL HARDWARE] For assistance with hardware or installation: call us at 1-877-BIKEAID (245-3243)
- [ADJUSTABLE] fits 26 IN. or 28 IN. bicycle tires, and features a fitting set to fit MOST BUT NOT ALL bike types
- [TOOLS REQUIRED] 3mm Hex Wrench is included for easy assembly, 8mm wrench or pliers are required but not included to tighten the lock nuts completely.
- [SPECIFICATIONS] lightweight, steel rack mounts to the back of your bicycle to help transport bags, panniers, cargo baskets and more at a 22 lb. or 10kg weight limit - a reflector bracket and spring flap are also included!
- [INSTALLATION] An updated assembly guide is available, please see product photos at the bottom of this listing page!
Last update on 2026-05-29 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.