December 8, 2022 NHTSA CAMPAIGN NUMBER: 22V909000
Loose Fasteners May Cause Rear Axle Instability
A rear axle that moves side to side can cause a loss of handling and control, increasing the risk of a crash. In addition, a loose rear axle may cause vehicle instability during an evacuation in an emergency, increasing the risk of injury.
NHTSA Campaign Number: 22V909
Manufacturer Navistar
, Inc.
Components SUSPENSION
Potential Number of Units Affected 6,948
Summary
Navistar
, Inc. (Navistar
) is recalling certain 2023 IC RE, IC EV, and 2023-2024 IC CE school buses. The fasteners that connect the transverse torque arm to the rear axle housing may have been tightened incorrectly, which can allow the rear axle to shift side to side.
Remedy
Dealers will replace and tighten the fasteners, free of charge. Owner notification letters are expected to be mailed February 6, 2023. Owners may contact Navistar
’s customer service at 1-800-448-7825. Navistar
’s number for this recall is 22527.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
22527
FEBRUARY, 2023
SAFETY RECALL
Transverse Torque Rod Fasteners on certain 2022 and 2023 IC Bus® CE school bus models and 2022 IC Bus® RE and Electric CE school bus models built 02/01/2022 thru 11/15/2022 with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS)
DEFECT DESCRIPTION
The fasteners of the transverse torque arm to the rear axle housing may not have been tightened to their specified value at time of assembly. Over time, they may become loose or separate, resulting in the rear axle shifting from side to side. In a bus application, a rear axle that shifts from side to side can cause reduced handling performance and may result in an increased risk of injury if students must be transferred to another bus near the roadway.
MODELS INVOLVED
This safety recall involves certain 2022 and 2023 IC Bus® CE school bus models and 2022 IC Bus€> RE and Electric CE school bus models built 02/01/2022 thru 11/15/2022 with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS).
PARTS INFORMATION
| Part Number | Part Description | Quantity |
| 8900326R91 | Kit; IROS Fasteners | 1 |
SERVICE PROCEDURE
1. Park vehicle on flat surface.
2. Shift transmission to Park or Neutral and set parking brake.
3. Turn vehicle to Key OFF position.
4. Install wheel chocks.
5. Remove bolts (Figure 1, Item 1) and nuts (Figure 1, Item 2) that fasten transverse torque rod to axle. Discard bolts and nuts.
6. Install new bolts (Figure 1, Item 1) and nuts (Figure 1, Item 2) that secure transverse torque rod to axle.
7. Tighten nuts to 217-239 lb-ft (294-325 N•m).
8. Remove wheel chocks.
Chronology :
- 08/05/2022 – Navistar
Field Service reviews field reports of four units with loose transverse torque rod axle side bolts on units in service less than three months. - 08/10/2022 – Navistar
’s Tulsa bus plant inspected 10 units built in
March and all were found in specification. Additionally, the tool and process for the transverse torque rod to axle joint were inspected with no issues found. - 08/11/2022 through 09/22/2022 – Nine more units were found with loose of missing axle side fasteners.
- 09/22/2022 – Navistar
Field Service received communication of three more units with axle side fasteners missing on units in service for less than three months. - 09/26/2022 – IC Bus dealer inspected 90 units at one location. All but 5 had their fasteners retightened to their specified value.
- 10/31/2022 – IC Bus dealer reinspected 10 of the fleet; four units found with bolts loose a second time.
These fasteners were replaced and sent to Navistar
engineering for analysis. - 11/11/2022 – Navistar
completes the part analysis for material hardness and found no deficiencies. - 11/16/2022 – Navistar
contains the issue in manufacturing by instituting a secondary torque top-off operation. - 11/22/2022 – Navistar
finalizes the suspect population. - 12/01/2022 – Navistar
declares a Safety Recall.
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| IC BUS | CE | 2023-2024 |
| IC BUS | EV | 2023 |
| IC BUS | RE | 2023 |
5 Associated Documents
Recall Acknowledgement
RCAK-22V909-6903.pdf 646.215KB
Defect Notice 573 Report
RCLRPT-22V909-5535.PDF 215.825KB
Recall 573 Report – December 13, 2022
RCLRPT-22V909-3880.PDF 215.868KB
Remedy Instructions and TSB
RCRIT-22V909-1126.pdf 174.177KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V909-2556.pdf 44.919KB
Latest Recalls Documents
- PRECISE & HIGH QUALITY - Manufactured in Taiwan, our torque wrench is engineered for superior precision. It ships pre-calibrated to +/- 4% accuracy, ensuring dependable results every time. Includes a calibration certificate with a trackable serial number for your assurance.
- DURABLE - Built to last, featuring a reinforced ratchet gear head made from hardened, heat-treated Chrome Vanadium alloy steel for maximum strength and durability.
- LONGEVITY - Protect your investment with our proprietary Electro-Black finish, providing advanced rust and corrosion resistance for extended tool life.
- PERFORMANCE - Easily read and set torque levels with our patent-pending dual-range scale. The high-contrast, yellow-on-black markings are designed for easy visibility, even in low-light conditions.
- OMFORT - Equipped with a reversible ratchet head that drives in both directions and measures torque in a clockwise direction. The ergonomic, knurled handle ensures a non-slip, comfortable grip, reducing hand fatigue.
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- 【Precise Torque Control|±3% High Accuracy】 HERONIX 3/8 torque wrench provides a working torque range of 5–50 Ft-Lb (6.8–67.8 Nm), ideal for precise mechanical adjustments. Each torque wrench 3/8 drive is factory-calibrated to ±3% accuracy and verified through extensive testing to ensure consistent performance. Perfect for spark plugs, bike components, and automotive repair.
- 【Laser-Etched Dual Scale|Clear & Easy to Read】 This mini
torque wrench features high-contrast laser-etched Ft-Lb and Nm scales on a durable black surface, ensuring excellent readability in any lighting environment. Quick, accurate torque settings help improve efficiency for every repair task. - 【Audible Click Feedback|Crisp & Noticeable Sound】 When your preset torque is achieved, the HERONIX torque wrench produces a sharp, clear “click” sound (≈45 dB) you can hear and feel—eliminating guesswork and preventing over-tightening. Reliable feedback for both beginners and professionals.
- 【Compact 72-Tooth Design|Smooth & Reversible】 Equipped with a 72-tooth reversible ratchet head, this small torque wrench supports both clockwise and counterclockwise operation. The compact 3/8 torque wrench head, quick-release mechanism, and ergonomic anti-slip handle make it ideal for tight spaces such as engine bays, bike frames, and underbody repairs.
- 【Multi-Scene Compatibility|For Bike, Motorcycle & Car】 With its versatile torque range, this nm torque wrench is suitable for bicycles, motorcycles, spark plugs, automotive components, machinery assembly, and more. Whether working in your garage or performing on-road adjustments, HERONIX delivers the dependable performance every mechanic and DIY user can trust.
- [MATERIAL] SUZUME torque wrenches are made of CR-V steel to ensure the durability of the torque wrench. The surface is also chrome-plated, which not only improves corrosion and wear resistance, but also gives the torque wrench set automotive a mirror-like luster, adding a touch of eye-catching beauty. For the handle, we chose a lightweight aluminum alloy, whose low-density characteristics greatly reduce the overall weight of the tool, making it easier to operate.
- [HIGH ACCURACY] The SUZUME 3PCS torque wrench set multiple sizes, covering torque wrench 1/2 drive,torque wrench 3/8 drive and 1/4 torque wrench, is each a commitment to superior workmanship. After rigorous fatigue testing, this torque wrench kit can withstand more than 10,000 repeated uses and still maintain an ±3% accuracy, which means you can use them with confidence and without worrying about re-calibration.
- [LOUD CLICK] SUZUME torquimetro are designed with a bi-directional ratchet head that makes it easy to apply precise torque, whether you operate the wrench clockwise or counterclockwise. When your operation reaches the preset torque value, the wrench will immediately emit a clear "click" sound, accompanied by a vibration, to ensure that you can sense and stop the operation at the first time, avoiding damage to bolts, nuts and even torque wrench' due to excessive application of force.
- [Dual-Scales] SUZUME strives for perfection in every detail of every product. This 6-piece torque wrench set includes: 1/2” torque wrench (10–170 ft.lb / 13.6–230.5 N.m), 3/8” torque wrench (5–45 ft.lb / 6.8–61 N.m), 1/4” torque wrench (20–220 in.lb / 2.3–24.9 N.m), plus 1/2” extension bar (5"), 3/8” extension bar (6") and 1/4” extension bar (4"). Every click torque wrench is equipped with a clearly visible torque scale that makes setting and reading torque values effortless. We use laser printing technology to ensure the durability of these scales, so you don't have to worry about the values becoming blurred by wear and tear, even under frequent use over a long period of time.
- [IDEAL PRESENT] Imagine a torque wrench set that can easily handle the repair needs of bicycles, motorbikes and cars! The SUZUME torque wrenches is just the solution you need. Whether you're tightening loose screws or performing complex mechanical repairs, this set is the ideal present for your father, husband or son, showing your support and understanding of their hobbies. Help him solve every challenge with ease
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-909 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Navistar
, Inc. Submission Date : DEC 08, 2022 NHTSA Recall No. : 22V-909 Manufacturer Recall No. : 22527 Manufacturer Information : Manufacturer Name : Navistar
, Inc. Address : 2701 Navistar
Drive Lisle IL 60532 Company phone : 331-332-1590 Population : Number of potentially involved : 6,948 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2024 IC CE school bus Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). • The inclusive dates of manufacture were determined by warranty data / first failure build date and when the issue was contained in manufacturing. • The vehicles in the suspect population were built at a certain assembly plant where all vehicles not subject to this recall were built at other manufacturing plants. There are 6,551 CE school buses in the suspect population Production Dates : FEB 01, 2022 – NOV 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2023-2023 IC RE school bus Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). • The inclusive dates of manufacture were determined by warranty data / first failure build date and when the issue was contained in manufacturing. • The vehicles in the suspect population were built at a certain assembly plant where all vehicles not subject to this recall were built at other manufacturing plants. There are 275 RE school buses in the suspect population Production Dates : FEB 01, 2022 – NOV 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-909 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2023-2023 IC EV school bus Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : HYBRID
ELECTRIC Descriptive Information : • The suspect population is identified by models equipped with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). • The inclusive dates of manufacture were determined by warranty data / first failure build date and when the issue was contained in manufacturing. • The vehicles in the suspect population were built at a certain assembly plant where all vehicles not subject to this recall were built at other manufacturing plants. There are 122 EV school buses in the suspect population Production Dates : FEB 08, 2022 – NOV 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fasteners of the transverse torque arm to the rear axle housing may not have been tightened to their specified value at time of assembly. Over time, they may become loose or separate, resulting in the rear axle to shift from side to side. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : In a bus application, a rear axle that shifts from side to side can cause reduced handling performance and may result in evacuation concerns when students must be transferred to another bus near the roadway. Description of the Cause : The tool used to assemble the transverse torque rod to the rear axle housing incorrectly gave the operator an indication it had reached the correct torque value when it did not. Identification of Any Warning that can Occur : A general “loose” feeling when driving, possible metallic clunking noise in the rear of the vehicle or during pre/post trip inspections the rear axle does not appear centered to the bus body. Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR Part 573 Safety Recall Report 22V-909 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : N/A – Manufacturing issue Address : NR NR Country : NR Chronology : • 08/05/2022 – Navistar
Field Service reviews field reports of four units with loose transverse torque rod axle side bolts on units in service less than three months. • 08/10/2022 – Navistar
’s Tulsa bus plant inspected 10 units built in March and all were found in specification. Additionally, the tool and process for the transverse torque rod to axle joint were inspected with no issues found. • 08/11/2022 through 09/22/2022 – Nine more units were found with loose of missing axle side fasteners. • 09/22/2022 – Navistar
Field Service received communication of three more units with axle side fasteners missing on units in service for less than three months. • 09/26/2022 – IC Bus dealer inspected 90 units at one location. All but 5 had their fasteners retightened to their specified value. • 10/31/2022 – IC Bus dealer reinspected 10 of the fleet; four units found with bolts loose a second time. These fasteners were replaced and sent to Navistar
engineering for analysis. • 11/11/2022 – Navistar
completes the part analysis for material hardness and found no deficiencies. • 11/16/2022 – Navistar
contains the issue in manufacturing by instituting a secondary torque top-off operation. • 11/22/2022 – Navistar
finalizes the suspect population. • 12/01/2022 – Navistar
declares a Safety Recall. Description of Remedy : Description of Remedy Program : • The remedy will involve replacing the transverse torque rod to axle fasteners and tightening them to their specified value. • Navistar
’s plan for reimbursement of pre-notification remedies, on file with NHTSA and dated 05/06/2022, applies and reimbursement instructions will be included in the customer notification. How Remedy Component Differs from Recalled Component : The remedy will involve replacing the fasteners and tightening them to their assembly value where the recalled fasteners were not tightened to their specified value. Identify How/When Recall Condition was Corrected in Production : 11/16/2022 – Navistar
manufacturing adds the use of a top-off torque wrench and witness mark to the joint’s fasteners. Part 573 Safety Recall Report 22V-909 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : It is estimated that the Customer and Dealer notification letters will be mailed by 02/06/2023. Planned Dealer Notification Date : FEB 06, 2023 – FEB 06, 2023 Planned Owner Notification Date : FEB 06, 2023 – FEB 06, 2023 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-909 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Navistar
, Inc. Submission Date : DEC 13, 2022 NHTSA Recall No. : 22V-909 Manufacturer Recall No. : 22527 Manufacturer Information : Manufacturer Name : Navistar
, Inc. Address : 2701 Navistar
Drive Lisle IL 60532 Company phone : 331-332-1590 Population : Number of potentially involved : 6,948 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2024 IC CE school bus Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). • The inclusive dates of manufacture were determined by warranty data / first failure build date and when the issue was contained in manufacturing. • The vehicles in the suspect population were built at a certain assembly plant where all vehicles not subject to this recall were built at other manufacturing plants. There are 6,551 CE school buses in the suspect population Production Dates : FEB 01, 2022 – NOV 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2023-2023 IC RE school bus Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). • The inclusive dates of manufacture were determined by warranty data / first failure build date and when the issue was contained in manufacturing. • The vehicles in the suspect population were built at a certain assembly plant where all vehicles not subject to this recall were built at other manufacturing plants. There are 275 RE school buses in the suspect population Production Dates : FEB 01, 2022 – NOV 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-909 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2023-2023 IC EV school bus Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : HYBRID
ELECTRIC Descriptive Information : • The suspect population is identified by models equipped with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). • The inclusive dates of manufacture were determined by warranty data / first failure build date and when the issue was contained in manufacturing. • The vehicles in the suspect population were built at a certain assembly plant where all vehicles not subject to this recall were built at other manufacturing plants. There are 122 EV school buses in the suspect population Production Dates : FEB 08, 2022 – NOV 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fasteners of the transverse torque arm to the rear axle housing may not have been tightened to their specified value at time of assembly. Over time, they may become loose or separate, resulting in the rear axle to shift from side to side. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : In a bus application, a rear axle that shifts from side to side can cause reduced handling performance and may result in an increased risk of injury if students must be transferred to another bus near the roadway. Description of the Cause : The tool used to assemble the transverse torque rod to the rear axle housing incorrectly gave the operator an indication it had reached the correct torque value when it did not. Identification of Any Warning that can Occur : A general “loose” feeling when driving, possible metallic clunking noise in the rear of the vehicle or during pre/post trip inspections the rear axle does not appear centered to the bus body. Involved Components : Component Name 1 : Bolt and Hex Nut Component Description : Bolt and Hex Nut Component Part Number : 31077R1 (BOLT) / 30756R1 (Nut Hex) Part 573 Safety Recall Report 22V-909 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : N/A – Manufacturing issue Address : NR NR Country : NR Chronology : • 08/05/2022 – Navistar
Field Service reviews field reports of four units with loose transverse torque rod axle side bolts on units in service less than three months. • 08/10/2022 – Navistar
’s Tulsa bus plant inspected 10 units built in March and all were found in specification. Additionally, the tool and process for the transverse torque rod to axle joint were inspected with no issues found. • 08/11/2022 through 09/22/2022 – Nine more units were found with loose of missing axle side fasteners. • 09/22/2022 – Navistar
Field Service received communication of three more units with axle side fasteners missing on units in service for less than three months. • 09/26/2022 – IC Bus dealer inspected 90 units at one location. All but 5 had their fasteners retightened to their specified value. • 10/31/2022 – IC Bus dealer reinspected 10 of the fleet; four units found with bolts loose a second time. These fasteners were replaced and sent to Navistar
engineering for analysis. • 11/11/2022 – Navistar
completes the part analysis for material hardness and found no deficiencies. • 11/16/2022 – Navistar
contains the issue in manufacturing by instituting a secondary torque top-off operation. • 11/22/2022 – Navistar
finalizes the suspect population. • 12/01/2022 – Navistar
declares a Safety Recall. Description of Remedy : Description of Remedy Program : • The remedy will involve replacing the transverse torque rod to axle fasteners and tightening them to their specified value. • Navistar
’s plan for reimbursement of pre-notification remedies, on file with NHTSA and dated 05/06/2022, applies and reimbursement instructions will be included in the customer notification. How Remedy Component Differs from Recalled Component : The remedy will involve replacing the fasteners and tightening them to their assembly value where the recalled fasteners were not tightened to their specified value. Identify How/When Recall Condition was Corrected in Production : 11/16/2022 – Navistar
manufacturing adds the use of a top-off torque wrench and witness mark to the joint’s fasteners. Part 573 Safety Recall Report 22V-909 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : It is estimated that the Customer and Dealer notification letters will be mailed by 02/06/2023. Planned Dealer Notification Date : FEB 06, 2023 – FEB 06, 2023 Planned Owner Notification Date : FEB 06, 2023 – FEB 06, 2023 * NR – Not Reported
**************************************************************************************************************
SERVICE PROCEDURE SUBJECT: ©~ □~□@ FEB O l 2023 Compliance Dept 22527 FEBRUARY, 2023 SAFETY RECALL Transverse Torque Rod Fasteners on certain 2022 and 2023 IC Bus® CE school bus models and 2022 IC Bus® RE and Electric CE school bus models built 02/01/2022 thru 11/15/2022 with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS) CUSTOMER LETTER Print ready (PDF file) copy of the Customer Letter DEFECT DESCRIPTION The fasteners of the transverse torque arm to the rear axle housing may not have been tightened to their specified value at time of assembly. Over time, they may become loose or separate, resulting in the rear axle shifting from side to side. In a bus application, a rear axle that shifts from side to side can cause reduced handling performance and may result in an increased risk of injury if students must be transferred to another bus near the roadway. MODELS INVOLVED This safety recall involves certain 2022 and 2023 IC Bus® CE school bus models and 2022 IC Bus€> RE and Electric CE school bus models built 02/01/2022 thru 11/15/2022 with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). ELIGIBILITY This procedure applies ONLY to vehicles marked in the International
® Service Portal”‘ with Safety Recall 22527. Also complete any other open campaigns listed on the Service Portal at this time. VEHICLE RECALL 22527 @ 2023 Navistar
, Inc. All rights reserved. All marl
**************************************************************************************************************
A llf.lVISl.lR COMPANY IC Bus, LLC 2701 Navistar
Drive Usie, IL 60532 USA navistar.com IMPORTANT SAFETY RECALL 22527 NHTSA RECALL NO. 22V909 This notice applies to your vehicle identified on the enclosed card. Dear IC Bus Customer, This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. IC Bus has decided that a defect which relates to motor vehicle safety exists in certain 2022 and 2023 CE school bus models and 2022 RE and EV school bus models built 02/01/2022 thru 11/15/2022 with feature code 14TBH, 14TBS, or 14TBT (Suspension, rear, air single; International
IROS). REASON FOR THIS RECALL The fasteners of the transverse torque arm to the rear axle housing may not have been tightened to their specified value at time of assembly. Over time, they may become loose or separate, resulting in the rear axle shifting from side to side. RISK TO MOTOR VEHICLE SAFETY In a bus application, a rear axle that shifts from side to side can cause reduced handling performance and may result in an increased risk of injury if students must be transferred to another bus near the roadway. DEFECT REMEDY The repair will involve replacement of the transvers torque arm fasteners and tightening them to their specified value. Authorized repair locations have parts and instructions to repair your vehicle. The repair will be performed free of charge and take approximately 45 minutes to complete. ACTIONS YOU SHOULD TAKE If you own this vehicle, please schedule an appointment with any IC Bus dealer to have your vehicle repaired. You IJ@&□ (srn@ FEB O 6 2023 By: ~t?.~/.~i-:f :’:’.ef.€-_ FEBRUARY 2023 can find your nearest dealer by using the dealer locator at http://www.icbus.com or by calling 1-800-448-7825. If you have already paid for repairs prior to this notice that corrected the defect, you may be eligible for reimbursement of certain repair expenses if they occurred 12/08/2021 thru 02/16/2023. Present your original repair paperwork and proof of payment to any IC Bus dealer and your eligibility will be reviewed. You may also submit a c!alm using the enclosed Request for Reimbursement card. If you are the lessor of this vehicle, please forward a copy of this notice to the lessee within ten days to comply with federal regulations. If you do not own this vehicle, please fill out and return mail the enclosed card so that you will not be contacted again about this recall. IF YOU NEED ASSISTANCE If you believe that IC Bus has failed to remedy the defect without charge or within a reasonable time, please follow the procedure described in the Owner Assistance Guide section in your Owner’s Manual or call toll free 1-800-448- 7825. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave, SE, Washington, DC 20590; or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800- 424-9153); or go to http://www.safercar.gov. IC Bus requests your prompt attention and patience regarding the correction of this defect and apologizes for any inconvenience this may cause you. IC Bus, LLC
SEOCONTENT-END
This product presentation was made with AAWP plugin.





