June 29, 2023 NHTSA CAMPAIGN NUMBER: 23V457000
Front Axle U-bolts Tightened Improperly
Broken U-bolts can result in a loss of vehicle handling and control, increasing the risk of a crash.
NHTSA Campaign Number: 23V457
Manufacturer Hino Motors Sales U.S.A., Inc.
Components SUSPENSION
Potential Number of Units Affected 64
Summary
Hino Motors Sales U.S.A., Inc. (Hino) is recalling certain 2023 NE7A, NJ7A, and NV7A vehicles. The front axle U-bolts that secure the front leaf spring assembly may be over-tightened, which can cause the U-bolts to break and detach.
Remedy
Dealers will replace the front axle U-bolts and upper seats, free of charge. Owner notification letters are expected to be mailed August 15, 2023. Owners may contact Hino customer service at 1-248-699-9390. Hino’s number for this recall is M0420.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
November – December, 2022
In late November 2022, Hino issued a stop ship order at its WV assembly plant, after receiving field reports of loose U bolts.
* Hino then conducted an inspection of 1,136 vehicles in its inventory, and found that 228 vehicles were over tightened. Hino immediately replaced the U bolts of vehicles in its possession to be within the design specification, and began an investigation to understand the cause.
January – May, 2023
As a result of checking production history, it became clear that vehicles with over tightened U bolts had been produced with the localized part. Hino began to install localized U bolts in July 2022. These localized U bolts demonstrated immediate quality concerns, namely that they could deform during the tightening process. Hino instituted a stop ship order on August 9, 2022, to replace all localized U bolts, and no localized U bolts reached the field. However, Hino determined that 64 vehicles that previously had a localized part that was replaced had been sold to customers or distributed in the field.
June, 2023
On June 23, 2023, based on the investigation result explained above, Hino determined to conduct a voluntary safety recall campaign for the subject vehicles that contain U bolt(s) which were over tightened.
As of June 22, 2023, Hino is not aware of any reports of accidents or similar cases relevant to this failure in warranty data or from the field.
* Hino is taking separate recall action with respect to other vehicles with loose U bolts, as described in greater detail in a separate report filed contemporaneously with this one.
3 Affected Products
Vehicles
2 Associated Documents
Recall Acknowledgement
RCAK-23V457-8875.pdf 645.305KB
Defect Notice 573 Report
RCLRPT-23V457-9547.PDF 215.018KB
Latest Recalls Documents
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISE & HIGH QUALITY - Manufactured in Taiwan, our torque wrench is engineered for superior precision. It ships pre-calibrated to +/- 4% accuracy, ensuring dependable results every time. Includes a calibration certificate with a trackable serial number for your assurance.
- DURABLE - Built to last, featuring a reinforced ratchet gear head made from hardened, heat-treated Chrome Vanadium alloy steel for maximum strength and durability.
- LONGEVITY - Protect your investment with our proprietary Electro-Black finish, providing advanced rust and corrosion resistance for extended tool life.
- PERFORMANCE - Easily read and set torque levels with our patent-pending dual-range scale. The high-contrast, yellow-on-black markings are designed for easy visibility, even in low-light conditions.
- OMFORT - Equipped with a reversible ratchet head that drives in both directions and measures torque in a clockwise direction. The ergonomic, knurled handle ensures a non-slip, comfortable grip, reducing hand fatigue.
- 【9-in-1 Torque Solution】Complete set includes 1/4", 3/8", and 1/2" drive click torque wrenches plus 6 essential adapters (extension bars, universal joint, drive adapters) securely stored in a sturdy portable case.
- 【High Precision & Dual Scales】Factory-calibrated to ±3% accuracy with included certificate; features dual-range scales (1/4": 10-220 in.lb, 3/8": 5-45 ft.lb, 1/2": 10-170 ft.lb) for versatile application coverage.
- 【Clear & Safe Audible Click】Upgraded loud "Click" sound provides a distinct, reliable signal (strong over 5 N.m, subtle under) when preset torque is reached, preventing overtightening and ensuring safety.
- 【Smooth 72-Tooth Ratchet & Quick Release】Reversible 72-tooth ratchet head offers a low 5° arc swing for use in tight spaces and smooth operation in both directions. Quick-release button ensures secure socket changes.
- 【Durable Construction & Wide Use】Hardened Cr-V steel ratchet heads and phosphated adapters resist wear; aerospace aluminum handles ensure lightweight strength and corrosion resistance. Ideal for precise torque on bikes, motorcycles, cars, trucks, wheels, and industrial applications. Backed by 24-month support.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- 3/8 inch drive torque wrench with 15-80 ft.-lb./20.4-108.5 Nm range; reminder: to prevent the ratchet from breaking, please do not overload the torque wrench
- Durable ratchet head made from hardened treated Chrome Vanadium steel alloy (Cr-V); bright, full polish chrome finish wipes easily clean and resists rust and corrosion
- High contrast and dual range scale pre-calibrated to ± 4%; tips: for precise scale adjustment, please use the imperial scale; the conversion formula between imperial scale and metric scale is 1 Nm = 8.86 in-lbs
- Includes sturdy plastic case for storage and portability
- NOTE: unlock before adjusting the torque value, lock after adjusting for stability of working torque; when finished, loosen locking ring and adjust to the lowest value for next use
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-457 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Hino Motors Sales U.S.A., Inc. Submission Date : JUN 29, 2023 NHTSA Recall No. : 23V-457 Manufacturer Recall No. : M0420 Manufacturer Information : Manufacturer Name : Hino Motors Sales U.S.A., Inc. Address : 45501 Twelve Mile Road Novi MI 48377 Company phone : 248-699-9300 Population : Number of potentially involved : 64 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2023 Hino NE7A, NJ7A, NV7A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : DIESEL Descriptive Information : The recall population was determined by reviewing Hino production and repair records. Between July and August, 2022, certain Hino vehicles were produced with a localized U bolt later found to have quality concerns. Hino elected to replace the localized U bolt with the U bolt that was used prior to localization. This report addresses an issue stemming from replacement of the localized U bolts, some of which were over torqued upon installation. Although the involved vehicles are within the above production period range, not all vehicles in this range were sold in the U.S. This recall excludes vehicles that were not originally equipped with the localized U bolt; were equipped with the localized U bolt but were correctly torqued when the U bolt was replaced; or were incorrectly torqued when the U bolt was replaced, but U bolt and upper seats were replaced and torqued to appropriate specifications before shipment. Production Dates : JUL 26, 2022 – AUG 23, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The subject vehicles contain two U bolts on each driver and passenger side in order to secure the front axle with the front leaf spring assembly including upper seats. The U bolt(s) and upper seat(s) may break or crack and fall off during vehicle operation because some U bolts were over tightened during replacement at the plant. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : In the worst-case scenario, the U bolt(s) and the upper seat(s) could be Part 573 Safety Recall Report 23V-457 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of the Safety Risk : broken and come off. The alignment of front axle and leaf springs may shift, causing a loss of vehicle control and leading to increased risk of a crash. Description of the Cause : During U bolts replacement, some U bolts were over tightened because the incorrect installation tool was used. Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Spring Pad Component Description : Upper spring seat Component Part Number : 48372-E0210 Component Name 2 : U bolt, Leaf SPG Component Description : U bolt for 12,000 lbs. Fr axle weight specification Component Part Number : SZ940-84259 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : November – December, 2022 In late November 2022, Hino issued a stop ship order at its WV assembly plant, after receiving field reports of loose U bolts. * Hino then conducted an inspection of 1,136 vehicles in its inventory, and found that 228 vehicles were over tightened. Hino immediately replaced the U bolts of vehicles in its possession to be within the design specification, and began an investigation to understand the cause. January – May, 2023 As a result of checking production history, it became clear that vehicles with over tightened U bolts had been Part 573 Safety Recall Report 23V-457 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 produced with the localized part. Hino began to install localized U bolts in July 2022. These localized U bolts demonstrated immediate quality concerns, namely that they could deform during the tightening process. Hino instituted a stop ship order on August 9, 2022, to replace all localized U bolts, and no localized U bolts reached the field. However, Hino determined that 64 vehicles that previously had a localized part that was replaced had been sold to customers or distributed in the field. June, 2023 On June 23, 2023, based on the investigation result explained above, Hino determined to conduct a voluntary safety recall campaign for the subject vehicles that contain U bolt(s) which were over tightened. As of June 22, 2023, Hino is not aware of any reports of accidents or similar cases relevant to this failure in warranty data or from the field. * Hino is taking separate recall action with respect to other vehicles with loose U bolts, as described in greater detail in a separate report filed contemporaneously with this one. Description of Remedy : Description of Remedy Program : For all the subjected vehicles, the Hino dealer will replace U bolts and upper seats, free of charge. Customers who have received the “Customer Notification Letter for Recall (M0420)”, who may have paid for repairs due to this defect may apply for reimbursement for those repair costs. All pre-notification reimbursement requests for repairs which were performed until a date 10 days after the final customer notification was made will be considered by Hino for reimbursement. Hino will also reimburse for all Parts, Labor, and miscellaneous costs directly related to the remedy of this defect. Requests for reimbursement, including paid receipts, should be directed to warranty@hino.com How Remedy Component Differs from Recalled Component : There is no change between remedy and recalled components. U bolt(s) in question will be torqued to required value. Identify How/When Recall Condition was Corrected in Production : The torque control rule in repairing process was created on June, 2023. Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : JUN 30, 2023 – JUN 30, 2023 Planned Owner Notification Date : AUG 15, 2023 – AUG 15, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





