Steering Arm May Break – 2022 Hyundai Translead Dry Van Trailers

August 2, 2023 NHTSA CAMPAIGN NUMBER: 23V543000

Steering Arm May Break

The fractured steering arm and tie rod can separate and fall to the ground, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V543

Manufacturer HyundaieBay logo Translead

Components STEERING

Potential Number of Units Affected 2

 

Summary

HyundaieBay logo Translead is recalling certain 2022 V/T 53SW Q29485 VI2530154-AFJ Dry Van trailers equipped with DextereBay logo Smart-Steer 2.0 Axles with bolt-on steering arms. The steering arm may fracture during certain conditions, such as low speed and high side-loading.

 

Remedy

Dealers will install a new steering arm and additional welds, free of charge. Owner notification letters were mailed August 11, 2023. Owners may contact HyundaieBay logo Translead customer service at 1-800-251-0871.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


IMPORTANT SAFETY RECALL

October 14, 2022

HyundaieBay logo Translead
685 De La Fuente Court
San Diego, CA 92154

Dear Sir or Madam,

Re: Safety Recall – Smart-Steer 2.0 Self-Steer Axle with 702887 Steer Arm

DextereBay logo Trailer Products of Canada Corporation (“DextereBay logo Canada” (Ingersoll Axles)) has determined that certain self steer axles installed or distributed by your company may contain a defect which could be a safety risk under certain conditions or applications.  Accordingly, a recall (NHTSA ID 22E-080) to address this issue was initiated effective September 21, 2022. This potential defect and the remedy are detailed in the attached Service Bulletin SB015 dated September 21, 2022.

The affected axles are models of the Smart-Steer 2.0 self-steering axle with the 702887 bolt-on steer arm built from October 13, 2017 to October 30, 2022.  DextereBay logo Canada has determined that under certain heavy loading conditions the steer arm attached to the knuckle can potentially shear. If this condition occurs, the upper section of the sheared steer arm will remain attached to the knuckle by the mounting bolts and lower section of the steer arm will remain attached to the tie-rod assembly but potentially drag along the ground. At no time will the vehicle become uncontrollable and the operator will be able to safely operate until they can secure the axle under the vehicle.

The repair, which is outlined in the Service Bulletin SB015 (attached), must be performed at a DextereBay logo Canada authorized facility and will be at no cost to the owner (DextereBay logo Canada will pay the cost of the prescribed repair).

Please provide all known owners of your trailers which contain an affected axle with a recall notice with the specific instructions for the repair, as well the locations and contact information for authorized repair facilities.

Your assistance with this matter is appreciated. Should you have any questions please contact Phil Schnurr directly  at 226-242-5345 or email [email protected].

 

Sincerely,

 

R.W. Gelven,
VP of Product Engineering and Product Innovation

 


Chronology :

After DextereBay logo Axle Company reviewed recent claims with a key customer, a service bulletin was requested to address the customer issues. Upon further investigations and reviews, DextereBay logo Canada conducted an analysis of the failure mode and determined the material was not robust enough to withstand the higher loading events which may occur in this configuration. Re-design activities were initiated to define a steer arm design that will withstand the unique, higher load events based on collected road load data.

 


22E080 – Steering Arm May Fracture – Dexter Axle Smart-Steer 2.0 Self-Steering Axles

 

http://oemdtc.com/12201/22e080-steering-arm-may-fracture-dexter-axle-smart-steer-2-0-self-steering-axles

 


1 Affected Product

Vehicle

MAKEMODELYEAR
HYUNDAIeBay logo TRANSLEADDRY VAN TRAILER2022

 


4 Associated Documents

Recall Acknowledgement

RCAK-23V543-3535.pdf 646.211KB

 


Defect Notice 573 Report

RCLRPT-23V543-4699.PDF 213.839KB

 


Owner Notification Letter(Part 577) – Redacted

RCONL-23V543-5397.pdf 139.955KB

 


Notification of Recall 22E080

RCORRD-23V543-6972.pdf 239.986KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
YESWELDER 135A MIG Welder, 110V Flux Core Gasless MIG/Lift TIG/Stick 3-in-1
  • READY OUT OF THE BOX: Start welding immediately! It masterfully handles Gasless Flux Core MIG, Stick, and Lift TIG (Extra Lift TIG torch required). This budget-friendly 3-in-1 machine includes extra E71T-GS .030''&.035'' flux core wires, known for its smooth arc and high feedability. Say goodbye to heavy shielding gas cylinders—perfect for outdoor, windy, or all-position welding.
  • SAY GOODBYE TO BURN-THROUGHS: Unlike rigid auto-welders, our upgraded Synergic Control automatically matches the recommended voltage to your wire feed speed, making it foolproof for beginners. Plus, the ±3V voltage micro-adjustment allows seasoned professionals to fine-tune the arc. This precise control is the ultimate solution for tackling thin auto body panels without burning through.
  • CRYSTAL-CLEAR LED DISPLAY: Never squint at your welder's settings again. Our advanced, oversized digital display revolutionizes the visual interface, offering enhanced clarity even in bright outdoor environments. Monitor real-time current during operation for precise control over every weld.
  • ROBUST POWER YET ULTRA-PORTABLE: Weighing only 11.4 lbs with a convenient carrying handle, it's the perfect on-the-go companion. Delivering a robust 135A output (110V), it effortlessly tackles mild steel up to 3/32" (2.5mm) thick. Engineered with an upgraded drive system for smooth wire feeding to prevent annoying jams.
  • SAFETY PRIORITIZED & STABLE ARC: The machine features comprehensive built-in safeguards, including robust protections against over-current, over-load, and over-heating, guaranteeing unparalleled user safety, device longevity, and fewer circuit interruptions.
SaleBestseller No. 2
YESWELDER 160A MIG Welder, 110V/220V MIG/Flux Core/Lift TIG/Stick
  • MULTIFUNCTIONAL: A 4-in-1 welder, capable of Flux Core MIG/Gas MIG/ Stick/Lift TIG (need to purchase extra tig lift torch). This unit caters to a wide range of welding applications and meets your various welding needs.
  • WELDING CAPACITY: With a robust 160A output, 110V/220V dual voltage, this welder is in possess of reliable quality and stable performance. It's widely used in various scenarios, including automotive, construction, fabrication and DIY. This Welder can work with 2LB and 10LB spools of .030"(0.8mm) and .035" (0.9mm) solid core wire, flux core wire. It also performs well with most 6010, 6011, 6013 and 7018 rods in Stick Welding mode.
  • SMART CONTROL: Smart control refers to Synergic control, when selecting different thicknesses or adjust the amperage, the recommend voltage and wire feeding speed will be automatically switched into. Great choice for beginners.
  • MANUAL CONTROL: You can manually adjust the wire feeding speed and voltage according to your preferences, which is ideal for seasoned professionals and DIYers.
  • LED DISPLAY: Advanced LED digital display, subverts the traditional visual experience, increases the visual clarity and improves the efficiency of the operation.
SaleBestseller No. 3
Futelo 145A MIG Welder, 110V 3-in-1 Flux Core Stick Lift TIG, 7.5 lb
171 Reviews
Futelo 145A MIG Welder, 110V 3-in-1 Flux Core Stick Lift TIG, 7.5 lb
  • 【3-IN-1 WELDER】Compact 3 in 1 welder combines MIG welder, Stick, and Lift TIG welding machine functions to tackle a wide range of welding tasks. With 30–145A output and support for carbon and stainless steel (1–5mm), it’s ideal for home DIY, repairs, and outdoor metal work. (NOTE: TIG torch not included—please purchase separately)
  • 【COMPACT & PORTABLE】This little welder machine 110V packs big power into just 7.5 lbs. Easy to carry with one hand, it’s perfect for your garage, yard, or job site. Don’t let its small size fool you—this compact welding machine delivers strong, reliable welds wherever you need them
  • 【SMART SYNERGIC CONTROL】Perfect for beginners! Just set your wire diameter (.030"/.035") or amperage (30-145A)—the welder machine auto-adjusts voltage and wire speed. It even suggests metal thickness! Start welding like a pro, even if it’s your first time
  • 【CLEAR LED DISPLAY】The bright digital screen shows real-time welding amperage and wire diameter, so you can monitor and adjust settings on your mig welder 110V without removing your mask. Intuitive and easy to use, it ensures consistent, high-quality welds—perfect for both experienced welders and weekend DIYers
  • 【WHAT YOU WILL GET】Everything you need is in one box! Includes: 1*145A MIG welder 110V, 1*14AK MIG torch, 1* Ground clamp, 1*Electrode holder, 5* 2.5" Welding rods, 1*0.9mm flux core wire, 2* Contact tips, 1* Wrench, 1* Safety goggles, 1*Pair of gloves, 1*Hammer and 1* User manual. Plug it in and start your first project within minutes—no extra purchases required
SaleBestseller No. 4
ARCCAPTAIN 165A MIG Welder 110V 220V 4-in-1 Gasless Gas MIG Stick Lift TIG
261 Reviews
ARCCAPTAIN 165A MIG Welder 110V 220V 4-in-1 Gasless Gas MIG Stick Lift TIG
  • 4-IN-1 MIG Welder: The welder machine offers GAS MIG/Flux Core MIG/Lift TIG/ MMA welding modes (Note: WP-17V TIG torch must be purchased separately). It can easily handle welding stainless steel, carbon steel, and even thicker steel materials, meeting diverse welding requirements.
  • TECHNICAL UPGRADE: This welding machine features upgraded MCU and IGBT technologies, enabling users to precisely adjust parameters for Synergy MIG (plate thickness, voltage, welding speed), Manual MIG (current, voltage), and MMA (hot start, arc force, etc.) while its dual-voltage design (110V/220V) supports flexible power switching (Caution: Ensure the screen is off and the fan has stopped before changing voltage settings).
  • LARGE LED DISPLAY: With an exclusive human-computer interaction LED screen design, this welder provides accurate data display, allowing you to read it more easily and clearly without removing your helmet. This welder also has 2T/4T functions, which can seamlessly switch between continuous welding (4T) for long-term operations and trigger-controlled precision welding (2T) for fine operations, improving efficiency and flexibility.
  • HIGH PERFORMANCE: The output current up to 165A, rated duty cycle: 60%, equipped with an upgraded cooling fan, the heat dissipation performance is improved by 30%, and can easily complete various welding tasks. This welder is capable of tackling mild steel workpieces up to 3/16” thick.
  • SAFETY PROTECTION: The 165A MIG welder Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
SaleBestseller No. 5
YESWELDER 205A MIG Welder, 110V/220V 5-In-1 MIG/Flux Core MIG/Spool Gun MIG/Lift TIG/Stick
  • 5 IN 1 MULTIFUNCTIONAL: The MIG-205DS PRO is capable of Gas MIG/Flux Core MIG/Spool Gun Aluminum MIG/Lift TIG/Stick. (additional lift TIG torch required and spool gun required). This unit caters to a wide range of welding applications and meets your various welding needs.
  • WELDING CAPACITY: With a robust 200 Amp output, 110V/220V dual voltage, this welder is in possession of reliable quality and stable performance. It's widely used in various scenarios, including automotive, construction, fabrication and DIY. It's suitable for welding thin and thick materials, such as steel, aluminum, and stainless steel.
  • SYNERGIC&MANUAL MIG: The wire feeding speed is flexibly adjustable(Min:58 in/min; Max:858 in/min), when adjusting the wire feeding speed, the voltage will be automatically matched to a recommended value, and you can fine tune the voltage between -3V~3V. Great choice for beginners. You can also manually adjust the wire feeding speed and voltage according to your preferences, which is ideal for seasoned professionals.
  • DIGITAL DISPLAY: The advanced digital display revolutionizes the welding interface, offering enhanced clarity and operational efficiency. Monitor the real-time current during welding for precise control.
  • SAFETY PRIORITIZED: Our product features comprehensive safeguards, including automatic compensation for voltage fluctuation, robust protections against over-current, over-load, and over-heating, ensuring unparalleled user safety and device longevity.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...