NHTSA Campaign Number: 18E052
Manufacturer Badass
Helmet Company
Components EQUIPMENT
Potential Number of Units Affected 762
Helmet may not Protect from Impact/FMVSS 218
A helmet that does not adequately protect the wearer from an impact can increase the risk of injury in the event of a crash.
Summary
Badass
Helmet Company (Badass
) is recalling certain Trooper motorcycle helmets, model TR001.6, in sizes XS, S, M, L, XL, and 2XL. These helmets may not adequately protect the wearer in the event of a head impact during a motorcycle crash and they may not stay secured to the rider’s head. Additionally, the label inside the helmet may be incorrect in that it does not list the actual helmet manufacturer and does not list the model of the helmet. As such, these helmets fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 218, “Motorcycle Helmets.”
Remedy
Badass
will notify owners and replace the defective helmets, free of charge. The recall began September 7, 2018. Owners may contact Badass
customer service at 1-866-334-3563.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
BADASS
Helmet Company
424 Valley Forge Rd Phoenixville, PA 19460
September 7, 2018
Recall 18E052
Dear Valued Customer;
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. BADASS
Helmet Company has decided that certain Trooper model helmets fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 218, “Motor Cycle Helmets.” This recall applies only to Trooper helmets manufactured in February 2017.
Wearing a motorcycle helmet that does not meet DOT standards may, in the event of an accident, expose the user to an increased risk of personal injury or death. A consumer that has a Trooper helmet subject to this recall should stop using the helmet.
BADASS
Helmet Company is recalling Trooper helmets manufactured in February 2017 and sold between May 2017 and June 2018. BADASS
Helmet Company will exchange the helmets subject to this recall for free. Trooper helmets subject to this recall will have a DOT certification sticker with the model number “TR 001.6” below the company identification BADASS
.
What you should do: If you own any of the above helmets, STOP USING IT IMMEDIATELY and call 1-866-334-3563 or contact us at BADASS
Helmet, P.O. Box 526, Royersford, PA 19468. Please state the following in your correspondence:
Your full name
Mailing address
Email address
Order number (if applicable)
Helmet model, size
Purchase price
Location where you purchased your Trooper helmet
If you have attempted to take advantage of this recall and you believe you have not been able to exchange your helmet within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C. 20590 or call the toll-free vehicle safety hotline at 1-888-327-4236 (TTY: 1-800424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this recall may cause, and we appreciate your speedy assistance to help us remedy this matter. On behalf of everyone at BADASS
Helmet Company, we thank you for your understanding.
IMPORTANT SAFETY RECALL
BADASS
Helmet Company
424 Valley Forge Rd Phoenixville, PA 19460
September 7, 2018
Recall 18E052
Dear Valued Dealer;
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. BADASS
Helmet Company, has decided that the Trooper model helmet failed to conform to the requirements of Federal Motor Vehicle Safety Standard No. 218, “Motor Cycle Helmets.” This recall applies only to Trooper helmets manufactured in February 2017.
BADASS
is recalling its Trooper Helmet because during routine follow up testing conducted by the Department of Transportation, sample helmets failed to meet the required performance standard for at least one of the following test conditions: (S7.1) impact attenuation; (S7.2) penetration; or (S7.3) retention system. Wearing a motorcycle helmet that does not meet DOT performance standards may, in the event of an accident, expose the user to an increased risk of personal injury or death. A consumer that has a Trooper helmet subject to this recall should stop using and replace the helmet with one certified as compliant with FMVSS 218.
BADASS
Helmet Company is recalling Trooper helmets manufactured in February 2017 and sold between February 2017 and June 2018. BADASS
Helmet Company is offering a product exchange for helmets subject to this recall. Trooper helmets subject to this recall will have a DOT certification sticker with the model number “TR 001.6” below the company identification BADASS
.
What you should do: If you still have any of the above helmets in your inventory, STOP SELLING THEM IMMEDIATELY and call 1-866-334-3563 or contact us at BADASS
Helmets, P.O. Box 526, Royersford, PA 19468. It is a violation of Federal law for a dealer to delivery to a customer equipment covered by this notification. Once you contact us, we will arrange for a helmet exchange.
We also ask that you provide a copy of this notice to your customers who purchased one of the effected helmets identified above. If so, your customers should STOP USING THE HELMET IMMEDIATELY and contact us using the above telephone number or address. They should tehn provide to us the following information:
Their full name
Mailing address
IMPORTANT SAFETY RECALL
BADASS
Trooper Helmet
September 7, 2018
Email address
Order number (if applicable)
Helmet model, size
Purchase price
Location where they purchased their Trooper helmet
If you or your customer has attempted to take advantage of this recall and you believe you have not been able to exchange your helmet within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C. 20590 or call the toll-free vehicle safety hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this recall may cause, and we appreciate your speedy assistance to help us remedy this matter. On behalf of everyone at BADASS
Helmet Company, We thank you for your understanding.
IMPORTANT SAFETY RECALL
BADASS
Helmet Company
424 Valley Forge Rd Phoenixville, PA 19460
September 7, 2018
Recall 18E052
Dear Valued Dealer;
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. BADASS
Helmet Company has decided that certain Trooper model helmets fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 218, “Motor Cycle Helmets.” This recall applies only to Trooper helmets manufactured in February 2017.
Wearing a motorcycle helmet that does not meet DOT may, in the event of an accident, expose the user to an increased risk of personal injury or death. A consumer that has a Trooper helmet subject to this recall should stop using the helmet.
BADASS
Helmet Company is recalling Trooper helmets manufactured in February 2017 and sold between May 2017 and June 2018. BADASS
Helmet Company will exchange the helmets subject to this recall for free. Trooper helmets subject to this recall will have a DOT certification sticker with the model number “TR 001.6” below the company identification BADASS
.
What you should do: If you still have any of the above helmets in your inventory, STOP SELLING THEM IMMEDIATELY and call 1-866-334-3563 or contact us at BADASS
Helmet, P.O. Box 526, Royersford, PA 19468. It is a violation of Federal law for a dealer to deliver to a customer equipment covered by this notification. Once you contact us, we will arrange for a helmet exchange.
We also ask that you provide a copy of this notice to your customers who purchased one of the affected helmets identified above. If so, your customers should STOP USING THE HELMET IMMEDIATELY and contact us using the above telephone number or address. They should then provide to us the following information:
Their full name
Mailing address
Email address
Order number (if applicable)
Helmet model, size
Purchase price
Location where they purchased their Trooper helmet
IMPORTANT SAFETY RECALL
BADASS
Trooper Helmet
September 7, 2018
If you or your customer has attempted to take advantage of this recall and you believe you have not been able to exchange your helmet within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C. 20590 or call the toll-free vehicle safety hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this recall may cause, and we appreciate your speedy assistance to help us remedy this matter. On behalf of everyone at BADASS
Helmet Company, we thank you for your understanding.
Owner Notification Letter
September 7, 2018
Dealer Notification Letter 18E052
September 7, 2018
Manufacturer Notice
September 7, 2018
Recall Acknowledgement
August 6, 2018
- Advanced Safety Design: Combines a lightweight ABS outer shell.
- DOT Approved, Clear Vision: Meets DOT standards, with a scratch-resistant, anti-fog lens for optimal visibility.
- Easy Quick Release: Convenient quick-release chin strap with adjustable features for effortless and speedy helmet adjustments and removal.
- Comfort System: Designed for superior comfort, the helmet’s interior features a moisture-wicking lining that ensures a cool and dry experience during your ride.
- Sun Visor for Added Protection: Built-in pull-down sun visor system provides effective sun protection, ensuring a comfortable and shaded ride.
- 3 SHELL SIZES — Typical offering requires additional padding sizes to accommodate all head sizes.
- IONIC+ PADDING — Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria.
- Meets Federal Motor Vehicle Safety Standard 218 (FMVSS 218). Meets DOT and ECE22.06 standards and certifications.
- 【DOT Certified & High-Impact Protection】 This full face motorcycle helmet meets or exceeds DOT FMVSS-218 standards, ensuring professional-grade safety. Built with a rugged ABS shell and energy-absorbing EPS, these motorcycle helmets dot approved provide ultimate defense for street bikes, cruisers, and sport bikes
- 【Optimized Airflow for All-Weather Riding】 Experience superior ventilation with 4 strategically placed air intakes and exhaust vents. This full face helmet design minimizes wind resistance and fogging, keeping you cool during summer rides and providing a reliable full face helmet adult option for rainy or cold weather
- 【Quick-Release Dual Visor System】 Adapt to any light condition with ease. Our full face helmet motorcycle features a tool-free quick-release system. Each order includes a pre-installed tinted shield plus a bonus clear visor, making these full face motorcycle helmets for men and women versatile for both bright days and night riding
- 【Washable Lining & Comfort Fit】 Maintain freshness on every journey with our fully removable and machine-washable interior. The moisture-wicking sponge padding makes these motorcycle helmets for adults incredibly comfortable for long-distance trips, ensuring a snug fit for these full face motorcycle helmets dot certified
- 【Complete Bundle & Perfect Sizing】 We include a premium carrying bag for easy storage and scratch protection. Whether you are searching for motorcycle helmets for women or men, TRIANGLE offers 4 sizes (S-XL) to ensure a secure fit. Please measure your head circumference to find the perfect full face motorcycle helmet for women or men
- High Resistance ABS Shell With Micrometrically Adjustable Strap
- Meets or Exceeds FMVSS-218 and DOT Safety Standards
- Helmet Liner / Cheek Pads are Lightweight, Soft and Easily Removable and Washable
- Sleek and Lightweight Design Reduces Wind Noise
- Modular Flip-Up Function Anti-Scratch, Anti-Fog and Wide View Clear Visor
This product presentation was made with AAWP plugin.




