NHTSA Campaign Number: 18E056 1801-0013 1801-0014
Manufacturer Hickory Springs Manufacturing Company
Components SEATS
Potential Number of Units Affected 31,990
Knee Impact Area Foam Insufficient/FMVSS 222
If the seat foam does not absorb enough impact energy, it can increase the risk of injury in the event of a crash.
Summary
Hickory Springs Manufacturing Company (HSM) is recalling certain CE White SB11-30″ series, standard, unbelted, school bus seats, and SB11-30″ series school bus seats with lap belts only. The foam in the knee impact area of the lower seat back may not absorb enough impact in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 222, “School Bus Passenger Seating and Crash Protection.”
Remedy
HSM will notify the bus manufacturers that purchased the seats, and dealers for those manufacturers will insert an additional piece of expanded polystyrene (EPS) foam into the seatback, free of charge. The recall is expected to begin on October 1, 2018. Owners may contact HSM customer service at 1-419-492-2157 extension 243.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Transportation Solutions
September 10, 2018
“IMPORTANT SAFETY RECALL NOTICE”
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
RECALL NO: 18E056
[Customer Name Goes Here]
[Contact Goes Here]
[Customer Address Goes Here]
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. No. 577.13, “Notification to Dealers and Distributors”.
HSM Solutions / CE White Company, A Subsidiary of Hickory Springs Manufacturing Company HSM, has decided that a certain SB11-30” and SB11-26” Series School Bus Seats that are not installed in the rear row of a school bus fail to conform to Federal Motor Vehicle Safety Standard No. 571.222 “School Bus Passenger Seating and Crash Protection”, more specifically the requirements of paragraph S5.3.2 Leg protection zone. The affected population includes SB11-30” seats manufactured by HSM Solutions / CE White Company, shipped between April 24, 2011 and July 17, 2018 and SB11-26” seats manufactured by HSM Solutions / CE White Company, shipped between April 24, 2011 and September 7, 2018.
HSM Solutions has determined that SB11 – 30” and 26” series School Bus Seats not installed in the rear row of a school bus as manufactured by CE White / HSM Solutions, may not comply with the impact requirements of CFR 49.571.222. Specifically, the lower knee impact area of the seat back may not meet the minimum requirements for energy absorption, as defined by the regulation. The thickness of the foam in the knee impact area of the lower seatback may be insufficient. There is an increased risk of injury to unbelted seat occupant(‘s) in a vehicle hard braking situation, or vehicle crash event. In a hard braking or crash event, the occupant(‘s) knees may contact the lower seatback, resulting in injury.
There is no audible or visual warning, which would precede an event. All seat models indicated in this notice are presumed to contain the defect and must be repaired.
Upon receipt of this Recall Notice, HSM Solutions / CE White is requesting that you provide notification of this Safety Recall, Recall Parts Request Form and the HSM Recall Warranty Claim form to your Customer/Owner of the subject seat(‘s).
To correct this condition, HSM Solutions / CE White, will facilitate the repairs via your Dealer/Service Agent or directly to your Customer. HSM will provide parts and a Service Repair Procedures “SRP1801-0013 (for 30” seat) and SRP1801-0014 (for 26” seat)”, which will provide instruction on how the repair must be conducted, to the servicing agent upon receipt of a completed HSM “Recall Parts Kit Order Card”. The expected out of service time necessary to affect repairs is 2 minutes per seat. HSM will reimburse the cost of repairs relating to this recall, including both parts and labor, at no cost to you the manufacturer/Dealer or to the vehicle owner. Parts for this recall are anticipated to be available for shipment on or before November 05, 2018.
Upon completion of the requisite service work, HSM will ask that the Dealer/Service Agent or Customer file a claim with HSM customer service for warranty reimbursement, referencing HSM Recall # 18E056 on the claim.
HSM Solutions Recall Contact:
Beth Utz
Customer Service Agent
HSM Transportation Solutions
417 N. Kibler Street
New Washington, OH 44854
Phone: 419-492-2157 ext. 243 | Fax: 419-492-2544
[email protected]
Should you have any vehicle(s) in inventory that require the recall service work; please make certain that these vehicles are corrected prior to sale. The Federal Motor Vehicle Safety Standard No. 577.13 states that it is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by the notification under a sale or lease until the defect or noncompliance is remedied.
Based on our review of internal shipping records, HSM Solutions / CE White has determined that “SB11-30” and 26” School Bus Seats” as indicated on the enclosed “Appendix – A”, were shipped to your manufacturing location on the dates indicated. Passenger seats in the rear row of a school bus are exempt from FMVSS 222 head and leg impact protection requirements and will not require repair.
If after contacting HSM Solutions / CE White, you have not received the parts and requisite repairs required to remedy the defect, in a reasonable period of time, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, DC 20590
1-888-327-4236
TTY: 1-800-424-9153
or go to: https://www.safercar.gov
If you have any questions about this recall please call HSM / C.E. White, Customer Service at 1-419-492-2157.
Sincerely,
Nate Seigler
Director of Engineering
HSM Transportation and Specialty Manufacturing Company
RECALL #18E-056
SERVICE REPAIR PROCEDURE #1801-0014
8/27/2018
RECALL #18E-056
SERVICE REPAIR PROCEDURE #1801-0013
7/16/2018
Manufacturer Notice
September 10, 2018
Recall Parts Kit Order Card
Recall Acknowledgement
August 9, 2018
- Cleaning & conditioning: Powerful leather cleaner and conditioner that removes dirt, oils, grime, and residue while restoring natural suppleness and improving the look and feel of leather furniture, car seats
, couches, sofas, jackets, handbags, shoes, saddles, and tack. This cleaning leather treatment nourishes and revitalizes finished leather surfaces, helping maintain softness and long-lasting protection - UV protection to prevent cracking: Provides advanced UV protection for leather, helping prevent fading, drying, discoloration, and cracking caused by sunlight exposure. This leather protector shields car leather seats, leather furniture, couches, and handbags to maintain long-lasting color and durability
- Works on all finished leather: Safe and effective on all finished leather surfaces, including car interiors, leather couches, sofas, recliners, office chairs, jackets, handbags, boots, shoes, baseball mitt, horse tack, and accessories. Also suitable as a faux leather cleaner and conditioner, making it a versatile solution for home and automotive leather care
- No sticky residue: Leaves no greasy residue, making it suitable for leather restoration, leather maintenance, and routine conditioning
- Premium Leather Care: Trusted by millions for high-quality leather cleaning and conditioning, Weiman delivers professional-grade results for car leather care, leather furniture maintenance, and everyday leather restoration. A reliable, long-lasting leather care solution backed by decades of expertise
- NON TOXIC, GENTLE CLEANER: Our proven, rejuvenating formula is a powerful, fragrance-free cleaner ideal for all your leather goods (except suede). EPA Safer Choice certified
- CLEAN ALL TYPES OF LEATHER: Quickly and gently removes dirt, oil, tough stains and grime from car seats, truck seats, upholstery, furniture, handbags, purses, shoes, accessories, saddles, and tack. Effectively cleans leather of all colors, including white leather. Safe for exotic leather, faux, vinyl
- SAFE FOR YOU, SAFE FOR LEATHER: Made with non-toxic, high-quality ingredients that makes your leather last longer. Safe for people, pets & your leather
- TEST & APPLY: Apply leather cleaner with a lint-free cloth. No need to scrub or rub — simply wipe down and allow it to dry. Spot test on each leather item first. Not for use on suede
- AMERICAN MADE SINCE 1968: Our premium leather care formulas have had a cult following among leather experts, retailers and high-end car and furniture makers and enthusiasts for over 50 years.
- COMPLETE LEATHER CARE KIT (SPI_109_16) - This Chemical Guys kit includes Cleaner and Conditioner, two 16 oz bottles that work together to clean, restore, and protect leather in cars, homes, and more
- CLEANS AND CONDITIONS - Chemical Guys interior cleaner for leather that lifts dirt and grime while the Conditioner nourishes and restores leather suppleness, leaving interior surfaces soft, smooth, refreshed
- VERSATILE USE - This car leather cleaner and conditioner kit is designed for automotive interiors and equally effective on leather furniture, apparel, shoes, boots, jackets, handbags, and other everyday leather goods
- SAFE & EFFECTIVE CAR LEATHER CONDITIONER AND CLEANER- pH-balanced formulas are safe for all natural, synthetic, and sealed leathers; gentle cleaning power helps prevent cracks, fading, and drying while preserving the original finish
- EASY TWO-STEP SYSTEM - Use this Leather Cleaner for car interiors to remove embedded dirt, then apply Leather Conditioner to hydrate and protect; achieve professional results at home or in your garage
- COLORLESS & ODORLESS LEATHER CLEANER (SPI_208_16) – Chemical Guys leather cleaner gently cleans leather surfaces without dyes or scents, lifting dirt, oils, and embedded dirt while preserving the natural look and feel
- SAFE FOR ALL LEATHER TYPES – A leather cleaner for car interiors, natural, synthetic, faux, and pleather; ideal for furniture, boots, jackets, handbags, and more
- REMOVES DIRT & GRIME – This car leather cleaner breaks down body oils, food spills, dust, and daily buildup without leaving residue, streaks, or causing discoloration
- PREPS FOR CONDITIONING – This Chemical Guys interior cleaner for cars and leather furniture cleaner is the perfect first step before applying a leather conditioner or protectant to maintain durability, suppleness, and appearance
- EASY TO USE – Spray directly on leather, as a leather car seat cleaner, or onto a microfiber applicator, gently scrub with a soft brush, and wipe clean for refreshed, clean leather
- Nourish leather with real beeswax in Armor All Leather Care With Beeswax. Real beeswax for leather is blended into this spray cleaner to preserve leather's supple feel. Designed as a car upholstery cleaner, this leather spray cleans, conditions and protects. The leather cleaner removes dirt and soil to effectively clean the grain. The leather conditioner restores the supple feel and rich beauty. Finally, leather protectant helps protect against drying, aging and cracking. Apply the car interior cleaner to your car's leather surfaces to revive that luxurious look and provide lasting protection.
- One 16 fl oz bottle of Armor All Leather Care With Beeswax
- Spray formula with real beeswax to nourish leather
- Removes dirt and soil to effectively clean the grain
- Conditions to restore supple feel and natural beauty
This product presentation was made with AAWP plugin.