23KWJ – Delayed Trailer Brake Release – 2021-2024 Kenworth T280, T380 & 2020-2024 T480

September 29, 2023 NHTSA CAMPAIGN NUMBER: 23V661000

Delayed Trailer Brake Release/FMVSS 121

A delay in the trailer brake release can create instability to the trailer and increase the risk of a crash.

 

NHTSA Campaign Number: 23V661

Manufacturer PACCAReBay logo Incorporated

Components SERVICE BRAKES, AIR

Potential Number of Units Affected 257

 

Summary

PACCAReBay logo Incorporated (PACCAReBay logo) is recalling certain 2021-2024 KenwortheBay logo T280, T380, 2020-2024 PeterbilteBay logo 548, 536, 2024 PeterbilteBay logo 537, and 2020-2024 KenwortheBay logo T480 trucks. The timing of the trailer brake release may be delayed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, “Air Brake Systems.”

 

Remedy

Dealers will replace the fittings and hoses in the affected valves, free of charge. Owner notification letters are expected to be mailed November 20, 2023. Owners may contact KenwortheBay logo’s customer service at 1-425-828-5888 and PeterbilteBay logo’s customer service at 1-940-591-4220. PACCAReBay logo’s numbers for this recall are 23KWJ and 23PBJ.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

07/07/23 – Engineering notified Safety & Compliance that brake timing test failed for a new model that used the same 2.1m Medium Duty end of frame tractor protection valve.

07/12/23 – Engineering began researching 2.1m Medium Duty configurations that have been built.

07/14/23 – PACCAReBay logo Technical Center continued brake timing tests for 2.1m Medium Duty to determine which configurations would not pass.

08/23/23 – Brake timing tests completed. Engineering created compatibility message to flag trucks in the backlog to get corrected.

09/08/23 – Engineering provided list of trucks in backlog already corrected.

09/11/23 – Plant provided list of trucks still at plant for Safety & Compliance to review which need to be corrected.

09/14/23 – Joint Safety Committee determined a regulatory non-compliance exists.

As of 09/14/23, PaccareBay logo received 0 warranty claims and 0 reports about 0 trucks in the field that may be related. 0 reports of deaths or injuries have been received.

 


24 Affected Products

Vehicles

MAKEMODELYEAR
KENWORTHeBay logoT2802021-2024
KENWORTHeBay logoT3802021-2024
KENWORTHeBay logoT4802020-2024
PETERBILTeBay logo5362020-2024
PETERBILTeBay logo5372024
PETERBILTeBay logo5482020-2024

 


3 Associated Documents

Noncompliance Notice 573 Report

RCLRPT-23V661-4548.PDF 216.565KB

 


Recall Acknowledgement

RCAK-23V661-9386.pdf 646.034KB

 


Safety Bulletin

RCSB-23V661-7015.pdf 106.985KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V661&docType=RCL

 


 

SaleBestseller No. 2
RYANSTAR RACING 2-Piece Automatic Slack Adjuster Release Tool Set for Air Brake System Adjustment - Includes Fork End Release Tool and Double Square Ratcheting Wrench
  • 【FEATURES】Automatic Slack Adjuster Release Tool Wrench Set is designed to simplify installation and servicing of air brake systems in heavy-duty trucks, long-haul trucks, and trailers. This tool set makes brake service tasks easier and more efficient.
  • 【Ease of Use】 The fork-end release tool securely fits under the brake system's pull pawl, allowing hands-free operation for servicing your truck. The tool is designed to release the tensioner button and safely adjust the brakes without prying or causing damage.
  • 【Convenient for Any Mechanic Tool Set】The 5/16" double square ratcheting wrench with E-Z Grip handle adjusts the brake with ease. It features a side-mounted forward/reverse lever for simple operation.
  • 【Time-Saving and Efficient】 The tools are made of durable carbon steel with oversized double injection handles that are comfortable to grip and use. Additionally, the double square offset reversible truck wrench provides reversible ratcheting action with an angled head for clearance.
  • 【Quality Assurance】We are committed to providing high-quality products, and if you're not satisfied with our Automatic Slack Adjuster Release Tool Set, please feel free to contact us. We will do our best to address your concerns and solve any problems you may have.
Bestseller No. 3
Ailbiuko 200 Pcs Brass DOT Air Brake Line Fittings & Air Nylon Tube Compression Fittings Assortment Kits,1/4" 1/8" 3/8" 1/2" NPT Push To Connect Fittings Quick Connect Air Hose Fittings
  • 3 TYPES OF BRASS FITTINGS: This set includes DOT push-to-connect fittings, compression nylon tube fittings, and brass pipe fittings. It can be used for maintenance work in various scenarios, such as air brake systems and pipelines, to meet most of your needs
  • 200PCS DOT FITTINGS SET: 30Pcs DOT push-to-connect fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,2pcs schrader valve;123Pcs DOT compression nylon tube fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,95pcs sleeve ferrules;45Pcs Brass pipe fittings:6pcs hex coupling,6pcs hex nipple,6pcs hex bushing,6pcs extension adapter,3pcs 90° street elbow,6pcs hex plug,12pcs socket plug;1pc 4m teflon tape;1pc tube cutter
  • PREMIUM MATERIAL: These fittings are made of high-quality CA360 brass and meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature flexibility, and low permeability
  • PRESSURE RANGE: Airline fittings have pressure resistance, making them less likely to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -40° F to +250° F(Note: see tubing manufacturer’s recommendations for pressure and temperature limitations)
  • EASY TO INSTALL: Our 200pcs fitting kit is easy to use in air systems and pipe connections. You need to use tools to fix loose parts to handle in tight places so that they will be firmer and not easily fall off. Some pieces that contain a threaded end already have sealant pre-applied, and we send Teflon tape as a gift to provide a secure connection
Bestseller No. 4
Torque 2 Pack of Type 30/30 Air Brake Chamber Sealed 2.5" Stroke Fully Threaded for semi Truck Trailer (Replaces Bendix 165255 K049898 NT3030STD120 802547 Haldex GC3030 GC3030P40 3030TS) (TR3030C)
  • TYPE - Air Brake Chamber Type 3030 30/30 30 30
  • REPLACEMENT - BendixeBay logo 165255 K049898 NT3030STD120 NT3030STD-120 802547 // MeritoreBay logo 3030TN2-HNTRX-C // Dayton 3030C // HaldexeBay logo GC3030 GC3030P40 // FreightlinereBay logo 3030TS // MackeBay logo 19QE441RP1
  • SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
  • FEATURES -
  • WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
Bestseller No. 5
CheeMuii 15FT Semi Truck Air Line Kit with Gladhand Holder and Springs Kit Red & Blue Air Brake Hoses and 7 Way Trailer Cord 3-in-1 Air Lines Set for Semi Truck Trailer Tractor
  • SPECIFICATION & CERTIFICATION: Package including: 1 pc 15 FT red&blue 3-in-1 air lines kit, 2 pcs 16" tender spring kits, 1 pair glad hands, 1 pair gladhand handles, 1 pc gladhand holder, 4 pcs gladhand seals, Teflon tape. Certification: [SAE J2394 - 4/12-2/10-1/8, -65℃/-85℉ for ABS Green Cable], [DOT SAE J1402A 3/8" ID Air Hose], [SAE J560 for Plug]
  • BOTH ENDS SPRING JOINT: Both ends of air brake hoses and ABS cables are protected by stainless steel springs. The spring joint with good elasticity can protect the wires well, and have a cushioning role when installing and using a wire. Therefore, our semi truck trailer air hose line kits have reliable security and long service life
  • ALUMINUM GLADHAND HANDLE: The CheeMuii air brake hoses are directly equipped with aluminum grips instead of rubber grips that are easily damaged and aged. We are committed to providing you with safer and more durable products
  • AIR BRAKE LINES: The CheeMuii red and blue air lines' double-braided design consists of interwoven spirals and is manufactured using a 3-layer integrated molding process. The air line hose assembly has higher burst pressure and better resistance to twisting, with a safer and longer service life
  • 7 WAY ELECTRICAL CABLE: The power lines use the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck, which meets SAE J560 testing and performance requirements. Both ends of ABS cables are protected by stainless steel springs. The spring joint can not only protect the wires well, but also have a cushioning role when installing and using

Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API


 

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...