12-23-8 – Brake Harness Connected Incorrectly – 2019-2023 Doosan Portable Generator Trailers

December 19, 2023 NHTSA CAMPAIGN NUMBER: 23V859000

Brake Harness Connected Incorrectly

Deenergized brakes will not engage, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V859

Manufacturer Doosan Portable PowereBay logo

Components SERVICE BRAKES

Potential Number of Units Affected 1,957

 

Summary

Doosan Portable PowereBay logo (Doosan) is recalling certain 2019-2023 Portable Generator Trailers. The electric brake harness was connected to the battery disconnect switch instead of the positive distribution lug of the battery, deenergizing the brakes when the battery disconnect switch is in the off position.

 

Remedy

Owners will be instructed to immediately stop towing the affected trailers until repairs have been made. Dealers will correct the wiring, free of charge. Owner notification letters are expected to be mailed January 19, 2024. Owners may contact Doosan customer service at 1-800-633-5200. Doosan’s number for this recall is 12-23-8.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


December 19, 2023

G25WDO-T4F / G40WDO-T4F / G50WDO-T4F Electric Brake harness connection with Battery Disconnect option

TSB Number: 12-23-8

Models Affected:
G25WDO-T4F (G06, H45, J02)
G40WDO-T4F (G67, H46, H85)
G50WDO-T4F (F90, H35, H86)

 

Issue:

For the units with electrical brake and battery disconnect options installed and listed on this bulletin, it has been identified that the electric brake harness connection may be connected to the positive distribution lug of the battery disconnect switch instead of the positive battery cable terminal. If connected in this manner and the battery disconnect switch is in the off position, the emergency electric brakes will be deenergized.

 

Solution:

To correct, please see instructions on the following pages:

 

Disconnect positive battery cable from battery using 1/2” wrench. (Fig. 1)

 

Remove metal cover around disconnect switch to expose positive distribution connection (Fig. 2)

 

Cut any zip ties that secure the electric battery harness.

Loosen and remove distribution nut using 9/16” wrench.

Remove electric brake harness from positive distribution lug.

Reinstall distribution nut and secure using 9/16” wrench.

Replace metal cover around disconnect switch.

Remove nut from positive battery cable battery terminal using 1/2” wrench (Fig. 3).

 

Install electric battery harness ring terminal onto battery terminal bolt and reinstall nut.

Install positive battery cable terminal on battery positive post and secure nut tightly on battery terminal using 1/2” wrench. • Verify electric brake solenoids are operating with battery disconnect in the OFF position.

 

 


Chronology :

Doosan Portable PowereBay logo received a field report on 10/4/2023 of a portable generator with both electric brake and battery disconnect options that had the electric brake harness connected to the positive distribution post of the battery disconnect switch instead of the positive battery cable terminal. Based on the field report, Doosan Portable PowereBay logo initiated an internal investigation and determined a noncompliance with the connection point of the electrical brake harness on units with both electric brakes and battery disconnect options. It was determined the affect range of generators with both electric brakes and battery disconnect options were built between 1/2/2019 to 7/31/2023.

 


5 Affected Products

Vehicle

MAKEMODELYEAR
DOOSAN PORTABLE POWEReBay logoMOBILE GENERATOR2019-2023

 


5 Associated Documents

Recall Acknowledgement

RCAK-23V859-9179.pdf 646.471KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-23V859-4964.pdf 57.866KB

 


Defect Notice 573 Report

RCLRPT-23V859-8832.PDF 237.307KB

 


Remedy Instructions and TSB

RCRIT-23V859-6862.pdf 505.658KB

 


Recall 573 Report 1/4/2024

RCLRPT-23V859-9165.PDF 237.366KB

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

 


 

Bestseller No. 1
REDARC Tow-Pro Liberty Electric Trailer Brake Controller, Universal Fit for 1 to 2 Axle Cars, Trucks, SUVs, Proportional Braking, 12V Compatible to Tow RV, Camper, Trailer, Boat
  • Proportional Mode Brake for Everyday Towing: The Tow-Pro Liberty delivers Proportional Mode braking for smooth on-road control. Easy to install and use, the system reduces push and pull for ultimate towing confidence on roads and highways
  • Universal Brake Controller for SUVs & Trucks: Pair with the universal pig tail wiring harness (TPH-025) or one of our vehicle specific brake controller wiring harnesses and switch inserts for factory-style integration (each sold separately)
  • What’s Included: Tow-Pro Liberty Electric Brake Controller, Remote Head Assembly, Remote Head Nut, Remote Head Knob, Remote Head Bezel, Remote Head Cable 3’3” (1 m). Supports 1–2 axles. Fits most common trailer braking applications
  • No Knee-Knocking and Sway Control: Compact dash dial blends seamlessly into your vehicle while Active Calibration and sway control deliver smooth braking, with or without a trailer to stay steady on roads
  • Confidence for The Long Haul: Designed and torture-tested in the Australian Outback, it's engineered for the toughest towing conditions. Trusted for 45+ years, REDARC offers a 2 year limited warranty on this trailer brake controller
Bestseller No. 2
CURT 51180 Echo Mobile Bluetooth Trailer Brake Controller, 7-Way, 1-2 Axles
  • PORTABLE — Echo installs between compatible vehicle and trailer 7-way RV blade connectors and easily transfers between vehicles without under-dash wiring. The vehicle 7-way must provide active +12V power, ground and turn-signal circuits; a vehicle brake-output circuit is not required. Echo uses the 7-way +12V connection to power the trailer brakes, and this circuit should be fused at 30 amps. Some vehicles require tow/haul mode or trailer load detection before 7-way power activates.
  • SMARTPHONE-READY — Use the OneControl Auto app on iOS 14+ or Android 9+. Enable Bluetooth and location permissions, then pair Echo inside the OneControl Auto app, not through your phone's Bluetooth settings. Keep the app in the foreground for prompt manual-override response and only adjust settings while stationary. OneControl Auto 2.2.0 adds improved larger-font support, fixes an Echo-screen crash on smaller Android devices and includes additional bug fixes.
  • ZERO-TOOL INSTALL — When your vehicle's 7-way already provides the required power and ground, Echo installs without under-dash wiring or tools. The safety strap is stored inside the Echo cap and should be installed before use. With the vehicle running or ignition ON and in Park, plug Echo into the vehicle 7-way first, pair through OneControl Auto, then connect the trailer on a level surface. Flashing yellow indicates 5-8 second calibration; solid green indicates Echo is paired with the trailer connected.
  • HIGHLY RESPONSIVE — Echo uses a triple-axis accelerometer for proportional trailer braking and supports trailers with 1-2 axles / 2-4 brakes. Adjust maximum output and sensitivity for your trailer and load. If Bluetooth communication is lost, the brake controller continues operating at the most recently programmed settings; app-based control and controller notifications require app communication. Always test trailer lights and braking before driving.
  • VERSATILE — Compatible with cruise control, ABS and low-voltage/PWM systems. An existing factory or aftermarket brake controller will not function while Echo is installed. When vehicle hazard lights are active, use the app's Hazard Lights setting to prevent pulsing trailer-brake output. Echo is designed for Bluetooth communication up to 50 ft unobstructed, though actual range can be limited by the phone, vehicle construction and other obstructions.
Bestseller No. 3
CURT 51116 Venturer Next Electric Trailer Brake Controller, Time-Delay, Fully Adjustable, Low Profile, 1-3 Axles, Plug-and-Play
  • Slim, low-profile design for a functional, modern aesthetic
  • Unique bracket system for improved dash clearance
  • Fully adjustable power and ramp time
  • Operates 2-6 trailer brakes at a time (1-3 axles)
  • No internal moving parts and no leveling required
Bestseller No. 4
HRepair Universal Trailer Brake Controller for Trailers with 1-3 Axles Compatible with Ford GM Chevy Dodge RAM Toyota Jeep etc. Replacement 90160 Primus IQ Brake Controller
  • ✨ Proportional Braking System: Ensures smooth, consistent stops by applying trailer brakes in proportion to your vehicle's braking intensity. Ideal for all trailer types, from light utility to heavy-duty.
  • ✨ Clear Digital Display: Easy-to-read screen provides real-time brake settings and connection status. Continuous diagnostics alert you to issues instantly for quick resolution.
  • ✨ Customizable Braking: Adjust braking power with the manual override lever and three boost settings. Perfect for varying towing loads and driving conditions.
  • ✨ Easy Installation: Plug-and-play wiring and flexible mounting options (snap-in clip or bracket) allow for quick setup within a 180-degree range.
  • ✨ Reliable Performance: Built with self-leveling tech and advanced circuit protection. Backed by lifetime service and a no-hassle return policy for worry-free towing.
SaleBestseller No. 5
Proportional Trailer Brake Controller 8508211 Digital Electric LED Display
247 Reviews
Proportional Trailer Brake Controller 8508211 Digital Electric LED Display
  • 【Intelligent braking】Proportional controllers are the safest and most responsive braking system you can install.Proportional trailer brake controllers automatically sense when your tow vehicle slows down or stops. This type of brake controller will replicate your own braking intensity for your trailer's brakes, whether you slow to a gradual stop or have to slam on your brakes
  • 【Easy to display】LED Digital display screens show the voltage delivery going from the brake controller to the trailer's brakes. Easy to read, easy to observe vehicle conditions in real time.In case of emergencies, make adjustments in time
  • 【Safer and more stable】Fits 1 to 4 axle (2 to 8 brakes) trailers to deliver a signal from your vehicle's brakes to your trailer,both quantity of braking power (result) and rate of the program (sync) can be adjusted to fit your inclination, the street conditions, and kind of trailer,increase the safety of driving.Requires no leveling
  • 【Quick installation and use】Wiring ports are available for vehicle-specific brake controller harnesses and provide a quick connection between the controller and the towing vehicle for quick and easy installation or removal
  • 【4 Wiring & controls】BLACK-Vehicle Power, RED-Stop Light, WHITE-Vehicle Ground, BLUE-Trailer Brakes

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...