January 11, 2024 NHTSA CAMPAIGN NUMBER: 24E003000
Overloaded Electrical System May Cause Fire
Overloaded electrical circuits can overheat, increasing the risk of fire.
NHTSA Campaign Number: 24E003
Manufacturer SVI Trucks
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 6
Summary
SVI Trucks is recalling certain Command Light Towers & Traffic Flowboards that contain Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
Remedy
SVI Trucks will work with Weldon to update the firmware, free of charge. Owner notification letters were mailed January 16, 2024. Owners may contact SVI Trucks customer service at 1-888-784-1112.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
IMPORTANT SAFETY RECALL
NHTSA RECALL No. 24E-003
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Command Light has decided that a defect, which relates to motor vehicle safety, exists in certain Command Light Towers & Traffic Flowboards that contain Weldon’s V-MUX 8 x 16 I/0 Nodes, Weldon Part Number 6030-2000-00 produced between March 10, 2020 and June 14, 2023. Versions 1.00 thru 1.02 are affected. This node was used in command light, light towers and traffic flow boards utilizing control through the Weldon V-MUX screen, no other control or products are affected.
In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur, and depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
You are receiving this notice because Command Light records indicate you have received shipments of affected units. Vehicles equipped with these devices need a firmware update.
Devices on the shelf at your facility can be remedied by updating the firmware to the latest version available
on Akron website https://www.akronbrass.com/vehicle-electronics/v-mux-8×16node#product_tabs_download and reload the design files (if any).
Completed vehicles that remain at your facility may have all the affected 8 x 16 installed nodes updated without accessing the individual nodes or design files using a Weldon service app and the downloader kit. This update is estimated to take 5 minutes.
Command Light will provide a free remedy to units installed on vehicles through the Command light and Weldon service network.
Please contact Mike Anderson [email protected] 970-297-7015
Please note that it is a violation of Federal Law to deliver a new motor vehicle or any item of motor vehicle equipment which is subject to a recall until the remedy has been performed.
If you believe there is a failure to remedy this defect without charge to the end user/owner of the vehicle and within a reasonable period of time, you may submit a written complaint to the Administrator, NHTSA, 1200
New Jersey Ave, SE, Washington, DC 20590, or call the Vehicle Safety Hotline 1-888-327-4336 (TTY: 1-800424-9153) or go to http://www.safercar.gov.
Thanks for your prompt attention to this matter and continued support of Command Light.
Chronology :
We Were Notified by Weldon about recall 23E-084 on 12/13/23
23E084 – Overloaded Electrical System May Cause Fire – Weldon 8×16 Input-Output Node Vehicle Multiplex Systems
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| COMMAND LIGHT | LIGHT TOWERS & TRAFFIC FL | |
3 Associated Documents
Recall Acknowledgement
RCAK-24E003-9337.pdf 645.387KB
Defect Notice 573 Report
RCLRPT-24E003-2268.PDF 213.792KB
Owner Notification Letter(Part 577)
RCONL-24E003-4093.pdf 149.955KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini
voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc. - 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- HIGH PERFORMANCE DUAL USB CHARGING PORTS - 24W / 4.8A USB Car Charger charges your favorite mobile devices Compatible for iPad (max speed), iPhone XS, XR, 8 Plus (max speed), HTC, Galaxy, MP3 Players, Digital Cameras, PDAs, Mobile Phones.
- REAL-TIME MONITORING - Concise LED screen displays vehicle’s operating voltage (12V/24V) or the total USB charging output (5V/4.8A Max) in real time, fully controlling the whole charging process. The LEDs are bright enough to read the display without being a distraction while driving.
- SAFE ON THE GO - Intelligent circuit design protects against short circuiting, over-heating, over-currents, and over-charging. Charging stops when battery is full.
- COMPACT DESIGN - One of the industry's smallest USB car chargers for added portability, featuring two USB ports and an LED Display make it easy to access after dark. Input: 12-24V; Output: DC 5V 4.8A or 24W (Shared by two ports). One Year Warranty.
- MONITOR VOLTAGE & Amps: Monitor the voltage of the vehicle's car battery when not charging any devices. When charging a device, it cycles between device's charging current, and the voltage of the vehicle's car battery.
- 🔋High Value Battery Tester: BM200 is your go-to solution for 12V lead-acid and lithium battery. Equipped with advanced features like voltage & cranking & charging system test, abnormal alarm and real-time trip records.This battery monitor ensures your car battery is always in optimal condition. Whether it's for your car, motorcycle, truck, RV or boat, this 12V battery tester has got you covered. Get it, and forget winter breakdown worries.
- 🚗Keep Your Journey Smooth: Ever lose your car in a crowded parking lot? Not anymore! From real-time battery monitoring and smart alerts to multi-vehicle management and location tracking, the BM200 12v battery tester isn't just a battery tester—it’s your all-in-one vehicle management companion. Perfect for drivers who want to avoid battery surprises and keep their vehicles running smoothly every day. Note: Seek car function requires GPS permissions to be authorized for the device to identify the vehicle's location.
- 🎄Cranking & Charging System: The cranking test helps you assess the battery's performance during vehicle startup, while the charging test lets you evaluate the operational efficiency between the battery, alternator, and electrical system——keeping your vehicle running smoothly without any surprises. With reliable accuracy, the BM200 car battery tester gives you the info you need to stay ahead, no matter the conditions.
- ✌️Effortless Battery Testers: Enjoy hassle-free battery monitoring with Bluetooth 4.2 technology. No need to stand by your car's hood—sit back in your car or within a 15~30FT range to access real-time battery information. Whether it's hot, cold, or rainy, you can conveniently monitor your battery's condition. Plus, the enhanced Bluetooth connection provides faster pairing and a stable, reliable connection.
- 📈Accurate Data, Every Time: With this battery checker tester smart chip tech, you’ll get razor-sharp accuracy every time you check your battery health. Compatible with both iOS and Android, the ancel BM200 battery tester app lets you monitor up to 4 devices all at once—keeping you effortlessly connected. Additionaly, this saves the day by recording battery data every 2 minutes and stashing 70 days' worth of history, so you can always track back and see what's up with your power. It is recommended to install the device after the vehicle has been switched off for two hours, when the voltage will be stable and the data will be more stable.
- 【Convenient】DROK batter meter can measure and display battery voltage, capacity, remaining battery capacity percentage with upgraded bigger screen. Make it more convenient to use comparing to others cause no need to switch interfaces.
- 【Reliable and Safe】This waterproof panel can protect internal components from moisture and corrosion. Further more, DROK batter monitor provides reverse polarity protection, automatic save on power outage, low power consumption and low voltage alarm.
- 【Applicable Battery Type】 DROK digital battery monitor is suitable for 8-100V 12V 24V 36V 48V 72V lithium battery, lead acid battery, ternary lithium battery, polymer lithium-ion battery, and more.
- 【Accuracy】With a voltage calibration potentiometer design from the back that can be rotated to adjust the voltage, DROK battery tester is convenient and more accurate to use.
- 【Wide Application】Can be used as battery voltage meter, battery capacity tester panel for motorcycle, golf carts, car, marine, RV, boat, solar generator etc.
- APPLICABLE BATTERY: Compatible with: ①L03-L20 series lithium battery pack
, ②L04-L24 series lithium-iron battery pack
, ③ lead-acid battery of DC 12V, 24V, 36V, 48V, 60V, 72V, 84V. This battery monitor also supports custom mode in range of DC 7-100V. - LCD DISPLAY: This golf cart battery meter features a bright blue-backlit digital screen with a durable acrylic waterproof cover. Simultaneously shows battery voltage and remaining capacity for clear, real-time monitoring.
- POWER-OFF MEMORY: This golf cart battery gauge automatically saves your settings when powered off, ensuring instant restoration of previous configurations upon restart.
- LOW VOLTAGE ALARM: The battery monitor 12v flashes when power drops below 10%, reminding you to recharge before complete depletion.
- LOW POWER CONSUMPTION: This battery voltage meter consumes less than 15mA in normal operation, dropping below 1mA in power-saving mode for minimal battery drain.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24E-003
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
SVI Trucks JAN 11, 2024 NHTSA Recall No. : 24E-003 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : SVI Trucks
Address : 3842 Redman Drive
Fort Collins CO 80524 Company phone : 2977032
Population :
Number of potentially involved : 6
Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : Command Light
Command Light Light Towers & Traffic Flowboards Part No. : Controls** V-Mux Size : all Function : NR
Descriptive Information : Command Light was notified by Weldon that NHTSA recall 23E-084 was issued for Nodes used in some of our command light products. Weldon identified 10 Nodes were purchased by command light that were in the affected population and provided a list of serial numbers of the nodes purchased. We cross referenced the node serial numbers and identified Four (4) were still in stock and six have been installed and shipped to customers. Only products that are affected are controlled using the Weldon Vista display.
Production Dates : MAR 10, 2020 – JUN 14, 2023
Description of Defect :
Description of the Defect : In the affected products, short circuit protection may not function properly.
FMVSS 1 : 101 – Control and displays FMVSS 2 : NR
Description of the Safety Risk : In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur, and depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
Description of the Cause : short circuit protection may not function properly
Identification of Any Warning
that can Occur :
Unknown Part 573 Safety Recall Report 24E-003 Page 2 Involved Components : Component Name : V-MUX 8 x 16I/O Node Component Description : Input Output Node Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : Weldon a Division of Akron Brass Address : 343 Venture Blvd.
Wooster Ohio 44691
Country : United States Chronology :
We Were Notified by Weldon about recall 23E-084 on 12/13/23 Description of Remedy :
Description of Remedy Program : Devices on the shelf at your facility can be remedied by updating the
firmware to the latest version available on Akron Website https://www. akronbrass.com/vehicle-electronics/v-mux=8×16-node#product tabs download and reload the design files (if any) Completed units may have all affected 8 x 16 installed nodes updated without accessing the individual nodes or design files using a weldon service app and the downloader kit. this update is estimated to take 5 minutes. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : firm ware will be updated to the latest version firmware for the 4 nodes in stock was updated to the latest version Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : FEB 01, 2024 – FEB 29, 2024
Planned Owner Notification Date : FEB 01, 2024 – FEB 29, 2024
The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24E-003
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
A division of Super Vacuum Manufacturing Co., Inc.
COMMAND LIGHT 3842 REDMAN DR, FORT COLLINS, COLORADO 80524 / PHONE 1-800-797-7974 / FAX (970) 297-7099
IMPORTANT SAFETY RECALL
NHTSA RECALL No. 24E-003
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Command Light has decided that a defect, which relates to motor vehicle safety, exists in certain Command Light Towers & Traffic Flowboards that contain Weldon’s V-MUX 8 x 16 I/0 Nodes, Weldon Part Number 6030-2000-00 produced between March 10, 2020 and June 14, 2023. Versions 1.00 thru 1.02 are affected. This node was used in command light, light towers and traffic flow boards utilizing control through the Weldon V-MUX screen, no other control or products are affected.
In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur, and depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
You are receiving this notice because Command Light records indicate you have received shipments of affected units. Vehicles equipped with these devices need a firmware update.
Devices on the shelf at your facility can be remedied by updating the firmware to the latest version available on Akron website https://www.akronbrass.com/vehicle-electronics/v-mux-8×16-node#product_tabs_download and reload the design files (if any).
Completed vehicles that remain at your facility may have all the affected 8 x 16 installed nodes updated without accessing the individual nodes or design files using a Weldon service app and the downloader kit. This update is estimated to take 5 minutes.
Command Light will provide a free remedy to units installed on vehicles through the Command light and Weldon service network.
Please contact Mike Anderson [email protected] 970-297-7015
Please note that it is a violation of Federal Law to deliver a new motor vehicle or any item of motor vehicle equipment which is subject to a recall until the remedy has been performed.
If you believe there is a failure to remedy this defect without charge to the end user/owner of the vehicle and within a reasonable period of time, you may submit a written complaint to the Administrator, NHTSA, 1200 New Jersey Ave, SE, Washington, DC 20590, or call the Vehicle Safety Hotline 1-888-327-4336 (TTY: 1-800-424-9153) or go to http://www.safercar.gov.
Thanks for your prompt attention to this matter and continued support of Command Light.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





