February 1, 2024 NHTSA CAMPAIGN NUMBER: 24V061000
Incorrect Weld May Cause Seat Failure/FMVSS 207
A loose or detached seat assembly increases the risk of injury.
NHTSA Campaign Number: 24V061
Manufacturer Jayco
, Inc.
Components SEATS
Potential Number of Units Affected 148
Summary
Jayco, Inc. (Jayco) is recalling certain 2020-2023 Entegra Anthem, Aspire, Cornerstone, and Reatta XL motorhomes. The pedestal mounting plate on the driver’s seat may be improperly welded, causing the plate to separate and the seat assembly to loosen or detach. As such, these seat assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, “Seating Systems” and number 210, “Seat belt assembly anchorages.”
Remedy
Dealers will inspect for a missing weld and replace the pedestal as necessary, free of charge. Owner notification letters are expected to be mailed March 1, 2024. Owners may contact Jayco customer service at 1-800-283-8267. Jayco’s number for this recall is 9903602.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On January 11, 2024, Villa International sent an email to notify Jayco Compliance regarding their NHTSA recall number 24E-002 and advised that they are recalling certain seat pedestals, with part number 400029. The pedestal mounting plate may be improperly welded, which can cause the plate to separate and the seat assembly to loosen or detach. As such, these seat assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.” A loose or detached seat assembly increases the risk of injury. The Villa seats affected were fabricated and delivered to Jayco from 12. 27.21 through 3.27.22. These seats were installed into Jayco Entegra, Anthem, Aspire, Cornerstone, Reatta XL vehicles.
On January 15, 2024 the Warranty Incident Review Committee (WIRC) discussed the incident and determined it should be elevated to CPAC.
On January 17, 2024 the Corrective and Preventive Action Committee (CPAC) met to discuss this incident and elevated it to the Safety Steering Committee.
On January 25, 2024 the Safety Steering Committee voted in favor of proceeding with a noncompliance recall for failing to comply with (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.”
24E002 – Incorrect Weld May Cause Seat Failure – Villa International Seat Pedestal
http://oemdtc.com/15125/24e002-incorrect-weld-may-cause-seat-failure-villa-international-seat-pedestal
16 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| ENTEGRA | ANTHEM | 2020-2023 |
| ENTEGRA | ASPIRE | 2020-2023 |
| ENTEGRA | CORNERSTONE | 2020-2023 |
| ENTEGRA | REATTA XL | 2020-2023 |
2 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-24V061-1659.PDF 215.641KB
Recall Acknowledgement
RCAK-24V061-1560.pdf 645.454KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- PNEUMATIC ADVANTAGE：Unique pneumatic system. With one - press operation, you can easily adjust the height from 14 to 20 inches, providing comfort unrivaled by non - pneumatic bases.
- CORROSION - RESISTANT：Anodized surface. Withstands seawater corrosion, ensuring long - term use on private boats.
- FULL - RANGE MOVEMENT：6 - inch slide adjustment via slide cover for flexible seating.
- EASY INSTALLATION：Designed for simple setup. Compatible with most seats. No professional skills needed.Tips：No screws included
- DURABLE & STYLISH：Made of high - quality aluminum. Modern look suits any boat interior. Robust construction for boating demands.
- Sturdy non-swivel mounting point for a boat seat
- Durable pedestal features reinforced welded joints for added strength
- Features integrated base mounting plate and seat mounting plate
- Has a black powder-coat finish that will withstand the rigors of a marine environment
- Product Dimensions: 7” H x 6.75” W x 6.75” L
- Boat seat Pedestal Height-adjustable:This fixed, non-rotatable boat seat pedestal is also height-adjustable, ranging from 11 ½ inches to 17 ½ inches. Combine it with other flat boat seat swivels for a perfect fit and customization according to your preferences
- Exceptional durability:Designed with reinforced welded joints, this boat seat pedestal ensures exceptional durability and reliability. Its black powder-coat finish adds extra protection against the harsh marine environment
- Ergonomic design:Featuring heavy-duty 2-7/8" posts and 9" dia., this boat seat pedestal offers an ergonomic experience. The positive-locking handles are crafted with stainless steel components for added strength and convenience
- Safe and secure:Engineered for strength and safety, the machined bases of this boat seat pedestal provide reliable support even in harsh offshore conditions
- Compatible with boat seat swivels:This boat seat pedestal can be easily paired with boat seat swivels, giving you the freedom to choose and combine according to your specific needs
- Adjustable Height and Improved Comfort,Our seat offers adjustable height ranging from 13"-19" with 7 lock-in positions. This allows you to easily adjust the height of your seat using a single lever, enhancing your visibility and providing superior comfort on the water.
- Strong and Durablity Material with Long-lasting Finish,Crafted from anodized aluminum, our seat is built to last. The smooth, thick wall and polished finish not only provide durability but also offer a corrosion-resistant feature that saves you money and the hassle of frequent replacements.
- Sturdy Base for Maximum Support,Our seat features a 9" diameter base with 2-7/8" diameter holes. This provides a strong and sturdy base that can support your weight and withstand shocks from waves, ensuring the safety of your knees and back by reducing the risk of injuries.
- Enhanced Mobility with 360° Rotation,With a 360° rotation and a locking knob, our seat enables you to easily rotate it in any direction. This swivel feature enhances your mobility and allows you to access different areas of your boat effortlessly.
- Universal Compatibility and Meet Class AD Standards,Our seat is compatible with all brands of seats and meets Class AD (Drive Grade) Standards. It is designed to ensure safety and reliability. With a weight of just 7L, it offers lightweight convenience without compromising on quality.
- POWERED ADJUSTABLE SUPPORT: 24-30 inches electrically adjustable post providing secure, stable, and effortless support for most premium marine boat seats
- UNIVERSAL 3/4-INCH FIT: Features integral seat mounts compatible with 3/4-inch non-threaded steel pin. Perfect for new installations or pedestal post replacements
- LOCK'N-PIN SAFETY TECH: Features Attwood’s proven Lock’N-Pin system to prevent accidental detachment, exceeding ABYC Standard H31.6.1 for maximum safety
- CORROSION-RESISTANT BUILD: Constructed from high-strength brushed aluminum with a steel pin, engineered to withstand harsh saltwater and freshwater environments
- Lock' N-Pin system ensures secure mounting and prevents unintentional detachment of components
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-061
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Jayco, Inc. FEB 01, 2024 NHTSA Recall No. : 24V-061 Manufacturer Recall No. : 9903602
Manufacturer Information :
Manufacturer Name : Jayco, Inc.
Address : 903 South Main Street
PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267
Population :
Number of potentially involved : 148 Estimated percentage with defect : 1 %
Vehicle Information : Vehicle 1 : 2020-2023 Entegra Coach Anthem, Aspire, Cornerstone, Reatta XL Class A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Jayco Inc. determined the population from production records.
Production Dates : NOV 21, 2019 – AUG 25, 2022
VIN Range 1 : Begin : 1JSMEACV6N14F8061 End : 1JSMEACV8P14W8050 ✔ Not sequential Description of Noncompliance : Description of the Noncompliance : According to Villa International: The pedestal can is not properly welded to the mounting plate. FMVSS 1 : 207 – Seating systems
FMVSS 2 : 210 – Seat belt assembly anchorages
Description of the Safety Risk : The can to mounting plate could separate resulting in an increased risk of a crash and injury.
Description of the Cause : The pedestal can is not properly welded to the mounting plate. Identification of Any Warning
that can Occur : The seat assembly would be loose.
Involved Components : Part 573 Safety Recall Report 24V-061 Page 2 Component Name 1 : Pedestal Component Description : Seating Pedestal Component Part Number : 400029 Supplier Identification : Component Manufacturer
Name : Villa International Address : 4733 Eastland Dr.
Elkhart Indiana 46516
Country : United States Chronology :
On January 11, 2024, Villa International sent an email to notify Jayco Compliance regarding their NHTSA recall number 24E-002 and advised that they are recalling certain seat pedestals, with part number 400029. The pedestal mounting plate may be improperly welded, which can cause the plate to separate and the seat assembly to loosen or detach. As such, these seat assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.” A loose or detached seat assembly increases the risk of injury. The Villa seats affected were fabricated and delivered to Jayco from 12. 27.21 through 3.27.22. These seats were installed into Jayco Entegra, Anthem, Aspire, Cornerstone, Reatta XL vehicles.
On January 15, 2024 the Warranty Incident Review Committee (WIRC) discussed the incident and determined it should be elevated to CPAC.
On January 17, 2024 the Corrective and Preventive Action Committee (CPAC) met to discuss this incident and elevated it to the Safety Steering Committee.
On January 25, 2024 the Safety Steering Committee voted in favor of proceeding with a noncompliance recall for failing to comply with (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.” Description of Remedy :
Description of Remedy Program : Jayco Inc. dealers will inspect for a missing weld at the can base and if the
weld is missing they will replace the pedestal, as necessary, free of charge. There are no warranty claims or complaints associated with this recall.
Jayco Inc. will be reporting the quarterly completion rates to NHTSA. How Remedy Component Differs from Recalled Component : The replacement pedestal will have the proper welds. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-061
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Identify How/When Recall Condition was Corrected in Production :
According to Villa International: Pedestals in production are inspected and documented after welded pedestal is completed, prior to being powder coated, after powder coating, and at final seat assembly. Recall Schedule :
Description of Recall Schedule : Jayco will notify its dealers and affected retail owners.
Planned Dealer Notification Date : MAR 01, 2024 – MAR 01, 2024
Planned Owner Notification Date : MAR 01, 2024 – MAR 01, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.