April 4, 2024 NHTSA CAMPAIGN NUMBER: 24V252000
An improperly installed wheel end hub assembly can leak oil, causing the axle spindles to loosen or fracture, increasing the risk of a crash.
NHTSA Campaign Number: 24V252
Manufacturer Terex Advance Mixer, Inc.
Components STEERING
Potential Number of Units Affected 12
Summary
Terex Advance Mixer, Inc. (Terex) is recalling certain 2023 Commander vehicles equipped with Composilite SC20 Lift Axles. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies.
Remedy
Dealers will inspect and replace the steering knuckle assemblies as necessary, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Terex customer service at 1-800-678-5961.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On November 13th, 2023 – Terex Advance was notified of the issue by Hendrickson
via Email.
November 15th, 2023 – Terex Advance and Hedrickson had a conference call to discuss the issue. During this we asked, based on their subject matter expertise, if this is a safety related issue. At that point they did not believe so, but were still determining that. However, they indicated that they were going to use there service network to inspect the trucks (equipped with the subject axles) and make repairs if necessary. At this time 6 of the 18 subject axles were still within Terex’s possession. Hendrickson subsequently came to our facility to inspect the axles and make repairs if necessary. 12 trucks, with the subject axle, were shipped prior to this meeting, and were under the possession of the customer. We worked with Hendrickson to put them in contact with the impacted customers so they could arrange to visit the customers location and inspect and remedy the axles involved.
March 19th, 2024 – Terex Advance received formal notification, by way of a NHTSA email, indicating that Hendrickson had filed a recall notification related to the specific axles they we discussed with Hendrickson on November 15th.
April 2nd, 2024 – Terex Advance after internal discussions and analysis of Hendrickson report, deemed this condition to be safety related. Therefore, a 573 defect report was authored. As of the authoring of this defect report, all 18 of the subject axles have been inspected and the remedy applied if necessary.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| TEREX ADVANCE | COMMANDER | 2023 |
3 Associated Documents
Recall Acknowledgement
RCAK-24V252-9931.pdf 645.973KB
Defect Notice 573 Report
RCLRPT-24V252-8390.PDF 214.487KB
Recall 573 Report – 04/22/2024
RCLRPT-24V252-6172.PDF 214.502KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- Genuine (RAS) RoadActive Suspension HD system is designed to strengthen and stabilize rear leaf springs for trucks carrying heavy loads or towing. Each kit is engineered, manufactured and assembled in North Carolina with a focus on durability, performance, and reliability. Since 1998, RoadActive Suspension has provided solutions that improve stability, reduce squat and sway, and extend the life of leaf springs.
- Reduces Squat & Bounce – Strengthens rear leaf springs by up to 50%, providing improved load support and control when towing or hauling—reducing squat by up to 2-3 inches.
- Unmatched Ride Quality & Stability – Maintains a smooth, controlled ride whether loaded or unloaded—no stiff suspension like other add-ons.
- 3-in-1 Suspension Upgrade – Functions as a helper spring, sway bar, and traction bar in a single, cost-effective solution.
- No Maintenance. No Adjustments. No Air Lines. – Installs in as little as 45 minutes and begins working immediately with zero upkeep—ideal for drivers who want performance without the hassle.
- Heavy-Duty Sandbag Spring: Supports up to 550 lbs and is compatible with a variety of sandbag styles, offering flexible configuration options for different setups
- Spring Mount with Cushioning Pads: Provides wear protection with built-in cushioning pads that minimize friction damage to both the sandbag and the mounting base, extending the equipment's lifespan
- Heavy-Duty Industrial-Grade Steel Frame: The sturdy industrial-grade steel construction enhances structural stability and significantly extends the product's overall lifespan with ultra-durable performance
- Thread-Lock Adjustable Clamps: The thread-lock adjustable clamps make installation and removal easy and convenient while maintaining excellent stability for secure and quick assembly
- Gym-Grade Design with Optional Carabiner Clips: Suitable for busy, high-traffic commercial gyms with high-quality thread-lock carabiners available as optional accessories
- Traxxas 3655-BLK - F/R L&R Heavy Duty Suspension Arms, Black
- Features:
- Includes:
- Specs:
- Part number(s) included (in factory packaging): 3655-BLK
- More Load Capacity: When towing a trailer or carrying heavy loads in the bed of your truck, the back of the truck will be pushed down, making driving difficult, the spring can provide an additional 70% Load Capacity (additional 1100 lbs), or increase the capacity of the bracket weight to balance the load on the vehicle.
- Fitment: Compatible with 2009-2018 Ram 1500 2WD 4WD. Extra 70% Load Capacity. Compare to: TTC-1223, 929-913.
- Premium Quality: The rear coil spring is designed with a powder-coated surface which has excellent rust resistance and anti-scratching to enhance the durability and superior reliability.
- Improve Driving Comfort: The heavy duty rear coil spring kit are specifically designed to significantly improve the 2009-2018 Ram 1500 rear end support and ride quality. after replacement, the ride comfort can be greatly improved and driving fatigue can be reduced.
- Service: If you encounter any problems, please contact us at any time.
- UPGRADED THICKER SPRINGS FOR ABSORPTION IN WASHERS These suspension rods for washers feature significantly thicker springs than standard replacements, providing superior shock absorption and tensile strength. The premium spring steel construction, paired with a multi-layer anti-rust coating, resists corrosion and moisture, effectively preventing spring sag and preserving consistent drum support.
- It replaces DC97-16350U, DC97-16350T, DC97-16350S, as well as DC97-16350K, DC97-16350R, DC97-16350E, DC97-16350D, DC97-16350J, EAP12720841, EAP5576568, EAP4221573, PS12708544, PS12720841, PS5576568, AP6884450, AP6806420, 4960907, 3999442, and many others. If your washer originally used any of these, this kit is manufactured to match the expected fit and function. Please always confirm your model number before ordering.
- WIDE COMPATIBILITY WITH TOP LOAD WASHERS INCLUDING WA50R5200AW AND WA45T3200AW These suspension rods are compatible with Samsung top load washers. Fits models calling for WA50R5200AW suspension rods, WA45T3200AW/A4 suspension rods, WA45N3050AW/A4 suspension rods, WA50R5400AV/US, and WA50R5400AW/US rods. Also compatible with WA50T5300AC, WA45T3400AV, WA45K7600AW, WA44A3405AW, WA422PRHDWR, WA484DSHAWR, WA5451ANW, WA5471ABW, WA56H900AP, and many more.
- COMPLETE 4-PIECE KIT WITH RUST-RESISTANT HARDWARE FOR Washers MACHINES You will receive four fully assembled suspension rods for washers, each complete with a sturdy support cup, a thick-gauge damped spring, a noise-reducing spring bushing, and a durable holder. A specialized anti-corrosion coating is applied to all metal surfaces, shielding against rust and moisture, which ensures smooth, consistent movement and long-term reliability.
- RESOLVES SHAKING, LOUD BANGING, AND WASHER “WALKING” ACROSS THE FLOOR Designed to fix common issues where your washer vibrates excessively, produces loud banging noises during spin cycles, or moves across the floor. By absorbing shock and stabilizing the drum, these shock absorbers compatible with washing machines restore quiet, stable operation and protect your floors from scratches. For best, balanced results, we recommend replacing all four suspension rods at the same time.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-252
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. APR 04, 2024 NHTSA Recall No. : 24V-252 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 12 Estimated percentage with defect : 95 %
Vehicle Information : Vehicle 1 : 2023-2023 Terex Advance Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Hendrickson contacted Terex Advance Mixer and informed them that 18 Composolite SC20 axles, that were shipped to Terex, had a defect. Hendrickson provided the serial numbers of the affect axles. Terex determined that 6 of the 18 axles were still on site and scheduled repair with Hendrickson. Terex determined what vehicles the remaining 12 axles had been installed on.
Production Dates : OCT 02, 2023 – OCT 20, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : A limited number of Hendrickson COMPOSILITE EXS20 and SC20 steerable auxiliary lift axle suspension assemblies and individual steering knuckle assembly components are equipped with bearing journals that may not have been seated correctly to the backbones of the left and right-side steering knuckle assembly components during manufacture.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : In some cases, the above-referenced condition may cause a loss of oil
lubricant from the wheel end hub assemblies. Over an extended period of operation, use of the lift axle suspension assemblies in this condition can result in (1) the respective axle spindles to become loose from the steering knuckle assemblies or otherwise fracture and/or (2) wheel end hub damage. This can further result in foreign object debris on the roadway, increasing the
risk of a crash and/or injury. Part 573 Safety Recall Report 24V-252 Page 2 Description of the Cause : NR Identification of Any Warning NR
that can Occur : Involved Components : Component Name 1 : AXLE,SUS,HEND COMPOSILITE SCT20K
Component Description : NR Component Part Number : 36675 Supplier Identification : Component Manufacturer
Name : Hendrickson USA. L.L.C Address : 2021 Parkside Drive
Schaumburg Illinois 60173
Country : United States Chronology :
On November 13th, 2023 – Terex Advance was notified of the issue by Hendrickson via Email. November 15th, 2023 – Terex Advance and Hedrickson had a conference call to discuss the issue. During this we asked, based on their subject matter expertise, if this is a safety related issue. At that point they did not believe so, but were still determining that. However, they indicated that they were going to use there service network to inspect the trucks (equipped with the subject axles) and make repairs if necessary. At this time 6 of the 18 subject axles were still within Terex’s possession. Hendrickson subsequently came to our facility to inspect the axles and make repairs if necessary. 12 trucks, with the subject axle, were shipped prior to this meeting, and were under the possession of the customer. We worked with Hendrickson to put them in contact with the impacted customers so they could arrange to visit the customers location and inspect and remedy the axles involved. March 19th, 2024 – Terex Advance received formal notification, by way of a NHTSA email, indicating that Hendrickson had filed a recall notification related to the specific axles they we discussed with Hendrickson on November 15th. April 2nd, 2024 – Terex Advance after internal discussions and analysis of Hendrickson report, deemed this condition to be safety related. Therefore, a 573 defect report was authored. As of the authoring of this defect The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-252
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
report, all 18 of the subject axles have been inspected and the remedy applied if necessary.
Description of Remedy :
Description of Remedy Program : All Customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. if their vehicle is impacted parts and any labor associated with the remedy of the condition will be reimbursed to the customer. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The replacement steering knuckle assemblies will include journal rings that are fully seated into the knuckle backbones.
NR
Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-252
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. APR 22, 2024 NHTSA Recall No. : 24V-252 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 12 Estimated percentage with defect : 95 %
Vehicle Information : Vehicle 1 : 2023-2023 Terex Advance Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Hendrickson contacted Terex Advance Mixer and informed them that 18 Composolite SC20 axles, that were shipped to Terex, had a defect. Hendrickson provided the serial numbers of the affect axles. Terex determined that 6 of the 18 axles were still on site and scheduled repair with Hendrickson. Terex determined what vehicles the remaining 12 axles had been installed on.
Production Dates : OCT 02, 2023 – OCT 20, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : A limited number of Hendrickson COMPOSILITE EXS20 and SC20 steerable auxiliary lift axle suspension assemblies and individual steering knuckle assembly components are equipped with bearing journals that may not have been seated correctly to the backbones of the left and right-side steering knuckle assembly components during manufacture.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : In some cases, the above-referenced condition may cause a loss of oil
lubricant from the wheel end hub assemblies. Over an extended period of operation, use of the lift axle suspension assemblies in this condition can result in (1) the respective axle spindles to become loose from the steering knuckle assemblies or otherwise fracture and/or (2) wheel end hub damage. This can further result in foreign object debris on the roadway, increasing the
risk of a crash and/or injury. Part 573 Safety Recall Report 24V-252 Page 2 Description of the Cause : NR Identification of Any Warning NR
that can Occur : Involved Components : Component Name 1 : AXLE,SUS,HEND COMPOSILITE SCT20K
Component Description : NR Component Part Number : 36675 Supplier Identification : Component Manufacturer
Name : Hendrickson USA. L.L.C Address : 2021 Parkside Drive
Schaumburg Illinois 60173
Country : United States Chronology :
On November 13th, 2023 – Terex Advance was notified of the issue by Hendrickson via Email. November 15th, 2023 – Terex Advance and Hedrickson had a conference call to discuss the issue. During this we asked, based on their subject matter expertise, if this is a safety related issue. At that point they did not believe so, but were still determining that. However, they indicated that they were going to use there service network to inspect the trucks (equipped with the subject axles) and make repairs if necessary. At this time 6 of the 18 subject axles were still within Terex’s possession. Hendrickson subsequently came to our facility to inspect the axles and make repairs if necessary. 12 trucks, with the subject axle, were shipped prior to this meeting, and were under the possession of the customer. We worked with Hendrickson to put them in contact with the impacted customers so they could arrange to visit the customers location and inspect and remedy the axles involved. March 19th, 2024 – Terex Advance received formal notification, by way of a NHTSA email, indicating that Hendrickson had filed a recall notification related to the specific axles they we discussed with Hendrickson on November 15th. April 2nd, 2024 – Terex Advance after internal discussions and analysis of Hendrickson report, deemed this condition to be safety related. Therefore, a 573 defect report was authored. As of the authoring of this defect The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-252
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
report, all 18 of the subject axles have been inspected and the remedy applied if necessary.
Description of Remedy :
Description of Remedy Program : All Customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. if their vehicle is impacted parts and any labor associated with the remedy of the condition will be reimbursed to the customer. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The replacement steering knuckle assemblies will include journal rings that are fully seated into the knuckle backbones.
NR Recall Schedule :
Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 13, 2024 – NR
* NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.