Inadequate Clearance Between Axle and Frame – 2024 Keystone Retreat, Residence, Dutchmen Aspen Trail, & Crossroads Hampton Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

April 11, 2024 NHTSA CAMPAIGN NUMBER: 24V263000

Inadequate Clearance Between Axle and Frame

Contact between the axle and the frame increases the risk of a crash.

 

NHTSA Campaign Number: 24V263

Manufacturer KeystoneeBay RV Company

Components SUSPENSION

Potential Number of Units Affected 214

 

Summary

KeystoneeBay RV Company (KeystoneeBay) is recalling certain 2024 KeystoneeBay Retreat, Residence 40CLDL, Residence 401CLDL, Dutchmen Aspen Trail 421LOFT, and Crossroads Hampton 390PVL trailers. The equalizer may provide inadequate clearance, allowing the axle to contact the frame.

 

Remedy

Dealers will replace the equalizer, free of charge. Owner notification letters were mailed April 30, 2024. Owners may contact KeystoneeBay customer service at 1-8696-425-4369. KeystoneeBay’s number for this recall is 24-453.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

3/15/2024 – Report was made that there was not enough clearance between the axle and the frame. No claims at this time just reported.

3/18/2024 – Investigation opened. All affected units were put on hold and yard was inspected. All units were fixed.

3/18/2024– KeystoneeBay Safety Committee reviewed the information and concluded that the data reviewed indicated a unanimous vote for a voluntary recall. Investigation called for to determine affected unit range.

4/9/2024 – Investigation concluded and scope completed.

 


4 Affected Products

Vehicles

MAKEMODELYEAR
DUTCHMENASPEN TRAIL LOFT2024
KEYSTONEeBayHAMPTON2024
KEYSTONEeBayRESIDENCE2024
KEYSTONEeBayRETREAT2024

 


4 Associated Documents

Recall Acknowledgement

RCAK-24V263-2332.pdf 652.129KB

 


Defect Notice 573 Report

RCLRPT-24V263-4747.PDF 216.303KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-24V263-9516.pdf 312.25KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [304.93 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-24V263-8491.pdf 315.306KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [307.92 KB]

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

 


 

SaleBestseller No. 1
SPARKWHIZ Trailer Shackle Kit, Tandem Trailer Axle Shackle Kit for Double Eye Springs (3.5K -5.2K Axles)
  • 2 x 7-3/4" Long Triangle Equalizer. Easy installation.
  • 8 x 9/16" Nylon Bushings, 8 x 2 9/16" Shackle Straps.
  • 14 x 9/16"-14 x 3" Long Shackle Bolts & Locking Nuts.
  • Made of high-quality materials, durable and corrosion resistant. Suitable for outdoor use.
  • If you have any questions about the product, please feel free to contact us.
Bestseller No. 2
A.A Tandem Axle Trailer Double Eye Leaf Spring Suspension Hanger Kit - 2,000-7,000 lbs (Tandem Axle)
  • Double Eye Springs Tandem Axle Trailer Suspension Kit 2K-7K lbs
  • For 2,000 - 7,000 lb axles, typically used on 3,500 lb single axles - Fits 1-3/4" wide double-eye springs
  • Made from heavy-duty steel - This is a weld-on application
  • Kit Includes: (2) EQ-E1 equalizers, (4) front/rear hangers, (2) center hangers, (8) shackle straps, (14) shackle bolts, (14) lock nuts
Bestseller No. 3
GREPSPUD Trailer Shackle Kit, Trailer Axle Equalizer Shackle Kit, Tandem Axle Trailer Shackles Equalizers Kit for Double Eye Leaf Springs 3500 lbs-5200 lbs Axles (14 Bolts & 14 Nuts)
  • 【VALUE FOR MONEY KIT】- Equip yourself with a sturdy trailer equalizer shackle kit, includes 2PCS long triangle equalizers, 8PCS shackle straps, 8PCS nylon bushings, 14PCS shackle bolts, 14PCS locking nuts. This kit includes everything you need for smooth installation or replacement, saving you time and effort, you can get back on the road quickly and safely.
  • 【SIZE】- OEM design, Equalizer's hole spacing is 7-3/4''. Shackle strap total length is 4.4'', hole spacing is 3-1/8'' (3.12''). Bolt length is 3-3/8''. Nylon Bushing is 9/16'' I.D. and 11/16'' O.D. The thread size of bolts and nuts is 9/16''-18. Please check that your size matches before purchasing.
  • 【STURDY & LONG SERVICE LIFE】- Each part in this kit is made of high-quality materials, reliable, sturdy and wear-resistant, can withstand the harsh tests of the road. Black oxidized and painted surface, impact resistant, corrosion and rust resistant, hard to deform. Suitable for outdoor use. ✔Lock nuts, squeezing both ends to protrude the middle thread, locking the nuts through thread deformation.
  • 【APPLICATION】- Trailer axle shackle kit for Double-eye Springs Tandem Axle Suspension (3,500 - 5,200 pound Axles). This high quality dual axle trailer kit is essential for any trailer with an equalizer. ✔The equalizers and shackle plates bear the most movement and weight in the suspension, and should be checked frequently.
  • 【SATISFACTION GUARANTEE】- For whatever reason, if you are not satisfied, you can contact us for replacement or refund. Please rest assured purchase.
Bestseller No. 4
MORryde CRE2-33 CRE3000 Suspension System, Tandem Axle - 33-Inch Wheel Base
  • Smoother towing than conventional leaf springs.Fit Type: Universal Fit
  • Provides 3" of suspension travel
  • Protects from damaging road shock
  • Easy bolt-on installation
  • Tested and rated for up to 8K miles
Bestseller No. 5
Tandem Axle Hanger Kit for 2" Wide Slipper Springs 5.2K-8K Axles Includes Heavy Duty 12" Equalizers & Hardware
  • Fits tandem axle trailers with 2" wide slipper springs & 32.5" axle spacing
  • Typically used with 8,000lb axles but found on 5.2K-7K axles as well
  • Includes 2 heavy-duty 12" long equalizers (E4541HD)
  • Includes (2) Equalizer Bolts, 7/8"-9x4-3/4" w/nut & cotter pin
  • Includes (4) Shackle/Retainer bolts, 9/16"-18 x 3.5" w/locknut
Bestseller No. 6
Lippert Road Armor Shock Absorbing Equalizer Kit for Tandem Axles - 3,500 to 8,000 lbs. (Yellow) — Includes 2 Tandem Equalizers - Greaseable Bronze Bushings - Easily Upgrade Torsion Axles — 696740
  • Introducing the Road Armor Tandem Shock Absorbing Equalizer Kit, the latest ride enhancing product brought to you by LipperteBay Components.
  • Each side of the Road Armor Equalizer has 3 inches of total vertical travel capability
  • Upgraded spray-coating on all fasteners to match automotive specifications
  • Great substitution for torsion axles
  • Easy aftermarket upgrade
Bestseller No. 7
2 Packs EQ-356 Short 6.13" Trailer Equalizer for Double Eye Springs Suspension Parts 9/16 Hole Fit for 1 3/4" Wide Leaf Spring Trailer Center Pivot
  • The EQ-356 6.13" Long Equalizer is a curved component that securely connects double-eye springs on tandem or triple axle trailers.
  • Transfers load and sudden impacts from one axle to another by permitting movement between the axles. It ensures a smooth ride and maintains load stability.
  • Distributes weight evenly across double-eye springs on dual- or triple-axle trailers.
  • Compatible with 1-3/4" wide, double-eye leaf springs featuring 9/16" spring eyes.
  • Left and right bolt hole diameter: 9/16". Center bolt hole diameter: 9/16"
Bestseller No. 8
JIOTAR Trailer Axle Hanger Kit Trailer Spring Equalizer Bolts EQ-11 Trailer Suspension Rebuilt Kit 11" Long 7/8" Center Hole, 2" Wide Slipper Springs (with Nuts & Bolts)
  • Trailer Spring Equalizer】Trailer equalizer bushings bolts kit replacement Part Number: EQ-11-Kit. 11" Long 7/8" Center Hole, 2" Wide Slipper Springs, include Nuts & Bolts. Fits springs with 9/16" diameter eye.
  • 【Features】11" Long trailer equalizer connects slipper springs on dual- or triple-axle trailers,Transfers load and sudden impacts from one axle to another by permitting movement between the axles,Distributes weight evenly,to keep the trailer ride smooth and the load undisturbed.
  • Trailer Axle Hanger Kit】Constructed of high-quality, 1/4" thick, hot rolled steel. Specs: 2" wide slipper leaf springs,Center bolt hole diameter: 7/8",Side bolt hole diameter (for mounting spring): 9/16" diameter,Side bolt hole diameter (for keeper bolt): 3/8".
  • Trailer Suspension Rebuilt Kit】 Includes:EQ-11: 11" Equalizer,GEB-78: 7/8" Grease Bolt,CN-78: 7/8" Nut for 7/8" Grease Bolt,91635B: 9/16"-18 x 3-1/2" Shackle Bolt (Extra Long), SB-LN-9: 9/16" Lock Nut for 9/16" Shackle Bolt.
  • 【Easy Install ation】1.Slip arched end of front spring into equalizer so that it rests on keeper bolt 2.Attach rear-most spring with shackle bolt through the eye.3.Suspends from center hanger .
SaleBestseller No. 9
Lippert Trailer Axle Attaching Parts (AP) Suspension Kit for 2,000-7,000-lb. Double-Eye Tandem Axles - Standard Equalizer, Standard Bolts - 121097
  • Replacement tandem axle AP kit
  • Standard bolts
  • Kit includes shackle links, mounting hardware, and equalizer
  • Easy To Install
Bestseller No. 10
GREPSPUD Trailer Axle Equalizer 256L Shackle Kit, Trailer Suspension Shackle Kit, Tandem Axle Trailer Shackles Equalizers Kit for Double Eye Leaf Springs 3500 lbs to 5200 lbs Axles (14 Bolts 14 Nuts)
  • SIZE: OEM design, Equalizer's hole spacing is 7-3/4''; Shackle strap total length is 3.81'', hole spacing is 2-9/16'' (2.56''); Bolt length is 3-3/8''; Nylon bushing is 9/16'' I.D. and 11/16'' O.D; The thread size of bolts and nuts is 9/16''-18. Please check that your size matches before purchasing
  • VALUE FOR MONEY KIT: Equip yourself with a sturdy trailer equalizer shackle kit, includes 2PCS long triangle equalizers, 8PCS 256L shackle straps, 8PCS nylon bushings, 14PCS shackle bolts, 14PCS locking nuts. This kit includes everything you need for smooth installation or replacement, saving you time and effort, you can get back on the road quickly and safely
  • STURDY & LONG SERVICE LIFE: Each part in this kit is made of high-quality materials, reliable, sturdy and wear-resistant, can withstand the harsh tests of the road. Black oxidized and painted surface, impact resistant, corrosion and rust resistant, hard to deform; Suitable for outdoor use
  • LOCK NUTS: Squeezing both ends to protrude the middle thread, locking the nuts through thread deformation. The nuts are not easy to fall off
  • APPLICATION: Trailer axle shackle kit for Double-eye Springs Tandem 3,500 to 5,200 pounds Axles Suspension. The equalizers and shackle plates bear the most movement and weight in the suspension, and should be checked frequently

 


Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...