Incorrect Fuel Lines May Cause Fire – 2023-2024 Morbark EB1821, EB2131, & EB1922 Brush Chippers

May 15, 2024 NHTSA CAMPAIGN NUMBER: 24V342000

Incorrect Fuel Lines May Cause Fire

An engine fuel line rated below the necessary pressure rating may burst and leak fuel, increasing the risk of a fire.

 

NHTSA Campaign Number: 24V342

Manufacturer Alamo Group Inc.

Components FUEL SYSTEM, GASOLINE

Potential Number of Units Affected 26

 

Summary

Alamo Group Inc. (MorbarkeBay logo) is recalling certain 2023-2024 MorbarkeBay logo EB1821, EB2131, and EB1922 brush chippers. The fuel lines that provide fuel to the engine may not have the necessary pressure rating of 58 pounds per square inch (PSI).

 

Remedy

Dealers will replace the engine fuel lines, free of charge. Owner notification letters are expected to be mailed July 12, 2024. Owners may contact MorbarkeBay logo’s customer service at 1-800-255-8839.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

In mid-March 2024 MorbarkeBay logo received an inquiry from a dealer asking about the pressure rating of the engine fuel lines. The dealer had noticed that the rating for the fuel lines was 50 PSI. The dealer asked MorbarkeBay logo if this was correct and a sufficient pressure rating for the pressure requirements of the engine.

MorbarkeBay logo began investigating the issue and testing the required pressure of the engine. A MorbarkeBay logo powertrain engineering manager tested the engine and the fuel line and discovered that the engine operates at a pressure of 58 PSI. This pressure was above the pressure rating of the fuel lines that MorbarkeBay logo installed on the engines.

The powertrain engineer then researched the required amount of pressure necessary for the 50 PSI rated fuel line to burst and discovered that this would likely happen when the pressure reached 250 PSI or greater.

However, it was also determined that at 58 PSI there was a chance that the fuel line could burst. MorbarkeBay logo then determined which models would have had these type of fuel lines installed.

MorbarkeBay logo determined that the issue was related to the use of engine fuel lines with an inadequate pressure rating for the engine. MorbarkeBay logo then determined that the use of engine fuel lines with a higher pressure rating above 58 PSI would ensure the engine fuel lines did not burst and douse the engine in fuel. A higher pressure rated fuel line was sourced and tested and it was determined that it would not burst at the 58 PSI required by the engine.

As of May 10, 2024, Alamo is aware of no warranty claims, no deaths, and no injuries related to this issue. The dealer inquiry in mid-March 2024 is the only such inquiry, notification, or report Alamo has received on this issue.

On May 10, 2024 Alamo decided to declare a voluntary safety recall to remedy this issue.

 


6 Affected Products

Vehicles

MAKEMODELYEAR
MORBARKeBay logoEEGER BEEVER 18212023-2024
MORBARKeBay logoEEGER BEEVER 19222023-2024
MORBARKeBay logoEEGER BEEVER 21312023-2024

 


2 Associated Documents

Recall 573 Report

RCLRPT-24V342-6304.PDF 215.957KB

 


Recall Acknowledgement

RCAK-24V342-7487.pdf 645.388KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose 0.25in w/ 20 Clamp
4,411 Reviews
YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose 0.25in w/ 20 Clamp
  • For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.
  • Stretchy two-layer compound structure, heavy-duty, with the outer layer wrapping the inner layer more evenly compared to others. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.
  • The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, minieBay logo bikes, dirt bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, snowmobiles, power pressure washers, marine boat outboardand motors, just about all small engines
  • For Briggs and Stratton MTD Troy Bilt Craftsman Tecumseh Cub Cadet Yard Machine Yard Man lawn mowers and snow blowers etc. Package includes one 10 feet fuel line and 20pcs Hose Clamps.
Bestseller No. 2
3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Rubber Push Lock Hose High Pressure 300PSI for Automotive Fuel Systems Engines
  • 【Size】ID: 3/8" (10mm), OD: 2/3" (17mm), Length: 10FT
  • 【Working Conditions】NBR Fuel Hose Working Temperature Range: -40°F to 257°F. Working Pressure: 300PSI. Burst Pressure: 1160PSI
  • 【Premium Material】Made of premium NBR materials, long service life, wear resistance and high temperature resistance
  • 【Applicable Medium】NBR Fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air, etc
  • 【Wide Application】NBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase
Bestseller No. 3
10ft 1/4" ID Fuel Line Hose with 20pcs 2/5" Clamps - Fits Kawasaki, Kohler, Briggs & Stratton Small Gas/Diesel Engines, Generators, Powersports - Durable Flexible Rubber Hose Kit
  • 【MODEL SIZE】 Fuel Line ID: 1/4 in. Fuel line OD: 7/16 in. Fuel Line Length: 10 ft.
  • 【TEMPERATURE RANGE】 Heat and cold resistance - from -22F to 338F
  • 【APPLICATIONS】 This small engine fuel line delivers gasoline, E-85, diesel, and biodiesel. It is engineered for reliable fuel transfer in lawnmowers, tractors, snowblowers, off-road vehicles, and virtually any small engine application.
  • 【PACKAGE INCLUDES】 10 Feet of 1/4 Inch ID Fuel Hose + 20Pcs Fuel Hose Clamps
  • 【NOTE】 The 1/4 fuel line is a non-pressurized fuel line and is not suitable for engines with fuel pumps.
SaleBestseller No. 4
EVIL ENERGY 6AN Fuel Line Kit 20FT CPE Nylon Braided Hose with 12 Fittings
  • Size & Performance Specs: 0.31" ID × 0.56" OD (8 mm ID×14.3 mm OD), 20 ft length, 6AN 9/16-18 UNF thread. Rated for 750 PSI working pressure, 2250 PSI burst pressure, and -22°F to 248°F. Please verify your AN size, thread type, and installation space before ordering. AN and NPT fittings are not interchangeable
  • 3-LayerFuel Hose: This 6AN hose features a CPE rubber inner tube, 304 stainless steel reinforcement, and a braided nylon outer layer for enhanced heat, pressure, and oil resistance. Aluminum alloy fittings resist corrosion for lasting durability
  • Complete 6AN Fuel Line Kit: Includes 20 ft of 8AN CPE nylon braided fuel hose, 10 swivel hose ends (4 straight, 2 × 45°, 2 × 90°, 2 × 180°), and 2 hose separator clamps. Secure fittings help prevent leaks, while multiple fitting angles allow flexible routing for an easier fuel line setup
  • Fuel Compatibility: This 6AN braided fuel hose is compatible with gasoline, diesel, race gas, engine oil, transmission fluid, and hydraulic fluid, and is also suitable for vacuum applications. Not compatible with E85, E10, or methanol
  • Wide Application: This 6AN fuel line kit is widely used for transmission oil cooler lines, fuel return lines, fuel supply lines, coolant fluid hose, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines
Bestseller No. 5
4 Sizes Petrol Fuel Gas Line Pipe Hose Tubing For String Trimmer Chainsaw Blower Lawn Mower and other Power Tools For 2 Cycle Small Engine Poulan, Craftman and more (Yellow 4PC)
4,517 Reviews
4 Sizes Petrol Fuel Gas Line Pipe Hose Tubing For String Trimmer Chainsaw Blower Lawn Mower and other Power Tools For 2 Cycle Small Engine Poulan, Craftman and more (Yellow 4PC)
  • 4 Different Size Fuel Line Hose - I.D x O.D: 0.08" x 0.14" (2mm x 3.5mm), 1/8" x 1/4" (3mm x6mm),1/8" x 3/16"(3mm x5mm),3/32" x 3/16" (2.5mm x5mm) Assoreted Sizes - One Kit Covers Many Small Engine Fuel Line ID/OD combinations Includes Four Common Fuel Line Sizes
  • 4 Feet Long Fuel Line Fuel Hose Fuel Tube - Extra Length Lets You Cut Exactly What You Need for your Specific Machine, Universal Fuel Line Replacement Kit For String Trimmers, Weed Eaters, Chainsaws, Blowers, And Other Small Gas Engines - Ideal For Routine Maintenance And Repairs
  • Our Fuel Hose Line Tube Fits for Most 2 Cycle Small Engines - Easy DIY Replacement - Practical Value Kit One Complete Set Covers Multiple Tools And Brands includes 1/8 fuel line & 3/32 fuel line, Making It A Smart, Cost-Effective Solution Compared To Buying Single-Size Fuel Lines
  • Perfect Replacement Fuel Line Set for Chainsaws, Blowers, Weedeater Whackers Trimmers and Other Small Engine Machines, 2 Cycle / 2 Stroke Engines, Perfect For Replacing Brittle, Leaking, Or Clogged Fuel Lines - Simple To Install With Basic Tools For At-Home Small Engine Servicing
  • Premium Material Petrol Fuel line - Oil and Gas Resistant, Corrosion Resistant. Value Pack - Enough Fuel Line Hose for Multiple Repairs or Future Servicing

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...