June 4, 2024 NHTSA CAMPAIGN NUMBER: 24V401000
Loss of Steering from Tie Rod Separation
Tie rod separation can cause a sudden loss of steering control and increase the risk of a crash.
NHTSA Campaign Number: 24V401
Manufacturer Daimler Trucks
North America, LLC
Components STEERING
Potential Number of Units Affected 25
Summary
Daimler Trucks North America, LLC (DTNA) is recalling certain 2024-2025 Thomas Built Buses Saf-T-Liner C2 school buses. The front axle tie rod ball joint studs may crack and break, which can result in tie rod separation.
Remedy
The remedy is currently under development. Owner notification letters are expected to be mailed August 3, 2024. Owners may contact DTNA customer service at 800-745-8000. DTNA’s number for this recall is D24R6.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
Chronology :
On May 7, 2024, a tie rod failed on a vehicle during the manufacturing process while located at a Detroit Diesel Corporation (DDC) facility. DDC, in conjunction with DTNA, began an investigation into the occurrence including communicating with the supplier of the broken part and a metallurgical analysis. On May 20, 2024, DTNA received information from the supplier that it had identified a quality spill affecting the tie rod end manufacturing. On May 22, 2024, the metallurgical analysis confirmed that the parts had not been properly heat treated and the supplier advised that a particular batch of parts that had undergone an experimental heat treatment process had been mixed in with other parts when the tie rod assembly was being produced. On May 28, 2024, DTNA determined that a risk to motor vehicle safety exists and decided to conduct a voluntary recall. DTNA is not aware of any warranty claims, field service reports, deaths, injuries or property damage claims related to this issue.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| THOMAS BUILT BUSES | SAF-T-LINER C2 | 2024-2025 |
2 Associated Documents
Recall 573 Report
RCLRPT-24V401-4310.PDF 215.011KB
Recall Acknowledgement
Latest Recalls Documents
- Universal Compatibility：This Inner Tie Rod Removal Kit is designed to fit most domestic and imported vehicles, including cars, pickups, and SUVs. It allows for the safe and efficient removal and installation of inner tie rods without the need to remove the rack and pinion, saving you time and effort during vehicle maintenance.
- The precision - crafted sliding ring ensures a firm hold on the crowfoot adapter, guaranteeing it won't bend during operation. Additionally, tie rods fit perfectly into the adapter, centering precisely on the tool for optimal performance.
- Inner Tie Rod Removal Kit: The kit comes with 12 crowfoot adapters in the most common SAE and metric sizes. These sizes include 1 - 3/16", 1 - 1/4", 1 - 5/16", 1 - 3/8", 1 - 7/16", 1 - 1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm. This wide range of sizes ensures that you can handle any inner tie rod job quickly and efficiently, meeting all your vehicle repair needs.
- Solid Construction：Our drawbar tool features a 1/2 - inch drive rod made of high - quality steel. It has been heat - treated and coated with oxide, which not only makes it extremely durable but also highly resistant to damage. It is also compatible with a 1/2" drive wrench for easy use.
- Complete and Portable Set：This Inner Tie Rod Removal Kit is a complete set that includes a rod, 12 adapters, and a portable case. All the tools are neatly stored and fixed in the case, making it easy to store and carry. Whether you are a professional mechanic or a DIY car enthusiast, this set is a convenient and practical addition to your tool collection.
- 【Inner Tie Rod Removal Set】Handy mechanic tool set easily removes & installs inner tie rods without removing the rack and pinion.12pcs Adapters Included Size 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm. Fits inner tie rods from 1-3/16 inches to 42 mm, ensuring compatibility with most vehicles.
- 【Easy Handling with 1/2-Inch Drive Tube】 The tie rod end puller in the kit features a 1/2-inch drive tube handle. This design makes it effortless to grip and maneuver, providing excellent control and leverage while removing and reinstalling tie rod ends. DO NOT USE IMPACT WRENCH.
- 【Versatility】With 13 pieces, including crowfoot adapters and a 1/2-inch drive tube, this tool kit offers versatility to tackle various inner tie rod sizes and configurations. It ensures compatibility with a wide range of vehicles. Its knurled grip keeps you in total control at all times
- 【High-Quality Construction】Constructed from AISI 1045 medium carbon steel, this tie-rod removal set boasts admirable strength and will give you corrosion-proof service for years. The sturdy construction can withstand the demands of frequent use, providing reliable and consistent results.
- 【Easy Storage】A rugged carrying case is included to keep all tool components neatly organized and stored. As a complete professional set, portable 13-piece master inner tie rod tools deliver the performance demanded by automotive shops and DIY mechanics alike.
- INNER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion; the 1/2 Inch drive tube handle with a 2.1 in inner diameter allows servicing on small cars, pick-ups, and SUVs
- 12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm
- UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit; works on inner tie rods with inaccessible wrench flats
- SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength; the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters
- HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use; select the right adapter, slide it over the tie rod, click the tool and adapter together, then use a 1/2 inch ratchet or impact wrench to remove the rod
- 【Premium Construction for Long-Lasting Durability】 Inner Tie Rod Tool Kit is built from high-strength steel, ensuring superior durability even under heavy use. Its reinforced tool wall minimizes the risk of breakage, making it the ideal choice for professional mechanics and DIY enthusiasts who demand reliability for tough jobs.
- 【Precision Engineering for Secure Fit】 Designed with precision in mind, Inner Tie Rod Tool Kitfeatures a sliding ring mechanism that securely holds the crowfoot adapter in place, preventing any bending or slippage during operation. Tie rods remain centered and stable, ensuring an efficient and accurate removal and installation process.
- 【Effortless Tie Rod Removal & Installation】 This heavy-duty inner tie rod tool allows for quick and easy removal and installation of inner tie rods without the need to disassemble the rack and pinion, significantly streamlining your vehicle maintenance tasks and saving time on repairs.
- 【Simple & User-Friendly Operation】 Select the correct adapter and slide it onto the inner tie rod. Attach the tube to the tie rod. Align the slot and rotate the collar to securely lock the adapter in place. Insert a 1/2" drive tool into the hole to easily remove the tie rod. This easy-to-follow process ensures smooth and efficient use every time.
- 【 Wide Compatibility with Multiple Vehicle Sizes】 The Inner Tie Rod Tool Kit includes 12 Crowfoot adapters, ranging from 1-3/16" to 42 mm, ensuring compatibility with a wide variety of vehicles. Sizes included are: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm, covering most car makes and models.
- Solid Construction -- Crafted from high-strength steel, this tie rod tool kit is built to last through frequent use, thickened tool wall to prevent it from breaking.
- Professional craftsmanship -- Precision sliding ring holds the crowfoot adapter tightly in place, the adapter will not bend during use. Tie rods fit snugly into the adapter and are centered on the tool.
- Easy Removal & Installation -- The heavy-duty steel inner tie rod tool allows removal and installation of inner tie rods without disassembling the rack and pinion for simplified maintenance. DO NOT USE IMPACT WRENCH.
- How to Use -- 1. Select the correct adapter and slip it over the inner tie rod. 2. slide the tube onto the tie rod. 3. Align the slot, then rotate the collar to lock the adapter in place. 4. Insert the 1/2" drive tool into the end hole and remove the tie rod.
- Popular Size Coverage -- 12pcs Crowfoot Adapters Included Size 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm. Fits inner tie rods from 1-3/16 inches to 42 mm, ensuring compatibility with most vehicles.
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.