NHTSA Campaign Number: 17V843
Manufacturer Newmar
Corporation
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 30
A brake fluid leak or air ingestion can lengthen the distance needed to stop the vehicle, increasing the risk of a crash.
Summary
Newmar Corporation (Newmar) is recalling certain 2017 Bay Star, Bay Star Sport, and Canyon Star vehicles, built on Ford chassis and equipped with Antilock Brake Systems (ABS). The brake Hydraulic Electronic Control Units (HECU) on these vehicles may be missing valve block ball plugs, potentially causing a brake fluid leak or air ingestion during electronic brake distribution and/or ABS activation.
Remedy
Newmar will notify owners, and Ford or Lincoln dealers will inspect the HECU for missing valve block ball plugs, replacing the unit as necessary, free of charge. The recall began on January 24, 2018. Owners may contact Ford customer service at 1-866-436-7332 or Newmar customer service at 1-800-731-8300. Newmar’s number for this recall is 17V-768.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
January 17, 2018
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Ideal for hydraulic and disc brakes
- Provides an extra margin of safety in extreme braking conditions (packaging may vary)
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- Ideal for hydraulic and disc brakes
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Increases dry boiling point to ensure maximum life and reliable braking power
- Provides protection against brake failure from vapor lock
- Helps prevent corrosion in brake system
- Works with all brake systems requiring DOT 4 fluids
- Exceeds federal motor vehicle safety standard No. 116
- High quality blend of polyethylene glycol ethers and additives
- Compatible with all brake system rubber components and other brake fluids
- Prevents seal hardening or softening
- Protects against rust and corrosion
- Provides excellent lubricity
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.