NHTSA Campaign Number: 18V902
Manufacturer Navistar
, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 475
A false code or a brake warning light may lead a driver to immediately pull over to transfer passengers to another bus, which can increase the risk of injury. Additionally, if the driver is aware that the warning is false, they may continue to use the bus, and in the event of an actual brake system problem, the driver will not be warned, increasing the risk of a crash.
Summary
Navistar, Inc. (Navistar) is recalling certain 2019-2020 IC Bus CE school buses equipped with hydraulic brakes. The brake pressure switch on these buses may become stuck possibly resulting in a false fault code and brake warning light on the instrument cluster.
Remedy
Navistar has notified owners, and dealers will inspect and replace any switch found from the suspect lot, free of charge. The recall began January 30, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar’s number for this recall is 18520.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy Instructions and TSB
January, 2019
Owner Notification Letter
January, 2019
Recall Acknowledgement
February 8, 2019
Latest Recalls Documents
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Ideal for hydraulic and disc brakes
- Ideal for hydraulic and disc brakes
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Provides an extra margin of safety in extreme braking conditions (packaging may vary)
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- Exceeds DOT 3 regulations: Formulated to meet or surpass DOT 3 requirements, ensuring consistent braking performance and dependable stopping power in all conditions
- Premium high boiling point: Helps prevent vapor lock and brake fade under extreme heat, maintaining safe and reliable braking even in demanding situations
- Full synthetic formula: Provides superior resistance to moisture absorption and corrosion, helping protect vital brake system components for long-lasting performance
- Superior protection and performance: Designed to deliver reliable braking under extreme temperatures while supporting the safety and efficiency of the braking system
- Recommended applications: Suitable for ABS, disc, and drum brake systems; surpasses SAE J1703, FMVSS 116, and ISO 4925 DOT 3 specifications
- High quality blend of polyethylene glycol ethers and additives
- Compatible with all brake system rubber components and other brake fluids
- Prevents seal hardening or softening
- Protects against rust and corrosion
- Provides excellent lubricity
This product presentation was made with AAWP plugin.