NHTSA Campaign Number: 18V914
Manufacturer Daimler Trucks
North America LLC
Components STEERING, SUSPENSION
Potential Number of Units Affected 73
Steering and Tie Rod Arm Bolts may be Loose
Loose tie rod arm bolts may lead to separation of the tie rod arm, affecting vehicle steering, and increasing the risk of a crash.
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Thomas Built Saf-T-Liner HDX, C2, and EFX School Buses, equipped with Detroit Axle axles. The affected vehicles may have loose steering tie rod arm bolts.
Remedy
DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA’s number for this recall is FL-802.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Daimler Trucks North America LLC
February 2019
18R7 (FL802)
NHTSA #18V-913 (Non-School Buses)
#18V-914 (School Buses)
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s)
Subject: DetroitTM Axle Steering Arm / Tie Rod Arm Capscrew Inspection
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Detroit Diesel Corporation, has decided that a defect which relates to motor vehicle safety exists on specific Freightliner 108SDM, 114SD,122SD, 4700, 4900, Business Class M2, and Cascadia model vehicles; Freightliner Custom Chassis, MT45, MT55, S2G, S2RV, XBS, XCL, XCM, XCR, and XCS chassis; and Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner HDX, and Saf-T-Liner EFX model school buses manufactured February 10, 2017, through July 21, 2018, with certain Detroit Axles.
On certain vehicles, the steering and tie rod arm bolts that join the steering and tie rod arm to the knuckle may not have accurate torque specification data. Without verification of torque data on the steering and tie rod arm bolts, it is unclear if the bolts were torqued to specification. Under torqued bolts may lead to a separation of the tie rod and disconnect the front wheels of the vehicle. A disconnect of the front wheels can reduce the ability to steer the vehicle, which could increase the risk of a crash.
Axles will be inspected for correct torque and repaired if necessary.
Please contact an authorized Detroit Diesel Authorized Repair Facility to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at
https://demanddetroit.com/find-a-dealer/. The Recall will take approximately six hours and will be performed at no charge to you.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days.
If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by a Detroit Authorized Repair Facility.
The following documentation must be presented to your dealer for consideration for reimbursement. Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Detroit Diesel dealer. Please speak with your Detroit Diesel authorized dealer concerning this matter.
If you have questions about this Recall, please contact the Detroit Diesel Customer Support Center, 13400 Outer
Drive West, Detroit, MI 48239, or call (800) 445-1980 (Eastern Standard Time). Detroit Diesel’s Customer Support Center is open 24 Hours / 7 Days a Week. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
DETROIT DIESEL WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
February 2019
D18R7 (FL802)
NHTSA #18V-913 (Non-School Buses)
#18V-914 (School Buses)
Transport Canada #18-719 (Non-School Buses)
#18-720 (School Buses)
Février 2019
18R7 (FL802)
NHTSA n° 18V-913 (non autobus scolaires)
N° 18V-914 (autobus scolaires)
Transports Canada n° 18-719 (non autobus scolaires)
N° 18-720 (autobus scolaires)
February 2019
18R7 (FL802)
NHTSA #18V-913 (Non-School Buses)
#18V-914 (School Buses)
REF #: ICI19-002
Effective: 01/24/2019
Release: 01/18/2019
SUBJECT: D18M7 – Replaced by Recall D18R7 (FL802)
Defect Information Report
December 19, 2018
Recall Acknowledgement
February 20, 2019
Latest Recalls Documents
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Meets or exceeds API Services GL-5 and non-synchronized manual transmissions calling for GL-4
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- The information below is per-pack only
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects against severe temperatures to help extend service life
- Formulated with extreme-pressure additives to minimize gear wear from shock loads
- Helps protect against gear wear from scuffing, scouring, corrosion and pitting
- Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.