January 7, 2019 NHTSA CAMPAIGN NUMBER: 19V026000
Tire May Contact Rear Floor Support
Tire contact with the floor support while being towed can affect vehicle handling, increasing the risk of a crash.
NHTSA Campaign Number: 19V026
Manufacturer Keystone
RV Company
Components TIRES, STRUCTURE
Potential Number of Units Affected 288
Summary
Keystone
RV Company (Keystone
) is recalling certain 2019 Dutchmen Endurance and 2017-2019 Dutchmen Voltage Travel Trailers. The tires may contact with the rear floor support, affecting the trailer’s handling.
Remedy
Keystone
has notified owners, and dealers will cut a notch in the floor support to provide sufficient clearance between the tire and the floor support, free of charge. The recall began on January 15, 2019. Owners may contact Keystone
customer service at 1-866-425-4369. Keystone
RV’s number for this recall is 19-338.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1/11/19
Keystone RV Company
SAFETY ADVISORY # 19-338
Voltage Endurance Tire Clearance
Keystone
is conducting a voluntary RECALL notification campaign in accordance with the National Highway Transportation and Safety Act. It has been decided that the vehicles in this recall population have been manufactured with tires that may come into contact with the rear floor support. The tires and floor support touching during travel may lead to an increased risk of property damage and poor vehicle handling.
| Models Included: | 2017-2019 Voltage 3561, 3655 | |
| 2019 Endurance 3506 | ||
| Serial Number Ranges: | 2017 Voltage | HZ990884 – HZ991255 |
| 2018 Voltage | JZ990000 – JZ991051 | |
| 2019 Voltage | KZ990047 – KZ990440 | |
| 2019 Endurance | KZ996051- KZ996131 | |
| Parts Required: | Black Spray Paint – pick up locally | |
| Tools Required: | Reciprocating saw | |
| Tape measure |
Note – Check serial number on Key Express to verify the campaign is open. Some vehicles were repaired before they left Keystone
.
When performing warranty or recall service, please make certain that appropriate Personal Protective Equipment (PPE) is used.
The remedy is to inspect the clearance above the tires and cut the floor supports so that there is a 3 inch minimum clearance if needed.
Step 1
Unload the cargo area and empty the fresh and holding tanks. The trailer must be unloaded in order to get an accurate measurement between the tire and the outrigger.
Step 2
Locate the trailer on a level, flat and hard surface. Chock the wheels.
Step 3
Using a reciprocating saw, cut a notch in the bottom side of the floor support located above the tires on the off door side of the unit. Cut the notch to allow 3” of clearance between the tire and the floor support, Figure 1.
Step 4
Touch up /spray paint the floor support as needed.
WARRANTY REIMBURSEMENT
REPAIR
Submit a claim on Key Express using Flat Rate Code # 7133842A
In the Complaint section note: Safety Advisory # 19-338
In the Cause section note: Safety Advisory # 19-338
In the Correction section note: Cut notch to allow for proper clearance
The amount of time authorized for repair is 1.0 hour per vehicle to cut notch for proper clearance.
Please call Keystone
RV Customer Service at (866) 273-1452 if you have any questions.
RECREATIONAL VEHICLE
SAFETY RECALL NOTICE
Safety Recall: Not assigned
Safety Advisory: 19-338
January 15, 2019
IMPORTANT SAFETY RECALL
«Owner_name»
«Street»
«Street_2»
«City», «State» «Zip»
This notice applies to your vehicle: «VIN» Dear «Owner_name»:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Keystone
RV Company has decided that a defect which relates to motor vehicle safety exists in certain model 2017-2019 Dutchmen Voltage and 2019 Endurance Fifth Wheels. As a result, Keystone
RV is conducting a safety recall. We apologize for any inconvenience this action may cause you; however your safety and continued satisfaction are of the utmost importance to us.
| Reason for this recall | It has been decided that the vehicles in this recall population have been manufactured with tires that may come into contact with the rear floor support. The tires and floor support touching during travel may lead to an increased risk of property damage and poor vehicle handling. |
| What we will do | Keystone |
| What we need you to do | As soon as possible, please make an appointment to have your RV serviced by your dealership. The labor time to perform this correction is approximately 1 hour. Please ask your dealer if you wish to know how much additional time will be needed to schedule and process your RV for this repair. |
| If you have questions | Your dealer is best equipped to obtain parts and provide service to ensure your RV is corrected as promptly as possible. Please contact Keystone Keystone |
If after contacting Keystone
Customer Service you are still not satisfied we have done our best to remedy this situation, you may also submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590. You may call the toll-free Vehicle Safety Hotline at 1-888-3274236 (TTY: 1-800-424-9153; or go to https://www.safercar.gov.) Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Thank you for your attention and cooperation in this matter.
Sincerely,
KEYSTONE
RV COMPANY
Rick Deisler
Vice President Service Operations cc: National Highway Traffic Safety Administration (NHTSA)
PO Box 2000 – Goshen, IN 46527-2000
Phone: (574) 535-2100 – Fax: (574) 535-2199
www.keystonerv.com
4 Affected Products
Vehicles
| DUTCHMEN | ENDURANCE | 2019 |
| DUTCHMEN | VOLTAGE | 2017-2019 |
10 Associated Documents
Remedy Instructions and TSB
RCRIT-19V026-0252.pdf 122.349KB
Voltage Endurance Tire Clearance Web
RMISC-19V026-9327.pdf 63.804KB
Manufacturer Notices(to Dealers,etc) – Voltage Endurance Tire Clearance Recall Dealer Letter
Voltage Endurance Tire Clearance Dealer EMAIL
RMISC-19V026-9890.pdf 133.981KB
Voltage Endurance Tweet
RMISC-19V026-3998.pdf 17.543KB
Recall Acknowledgement
RCAK-19V026-6077.pdf 245.625KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V026-7102.pdf 89.218KB
Recall Quarterly Report #1, 2019-1
RCLQRT-19V026-3851.PDF 211.131KB
Recall Quarterly Report #2, 2019-2
RCLQRT-19V026-7683.PDF 211.233KB
Recall Quarterly Report #3, 2019-3
RCLQRT-19V026-6108.PDF 211.315KB
Latest Recalls Documents
- 【150 LBS HEAVY DUTY】This spare tire bracket is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place and holds up to 150 Lbs.
- 【WIDE APPLICABILITY】Our spare tire carrier
compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern. Because of its universal compatibility, it is also suitable for boat trailers. - 【Robust Construction】Once the screws are tightened, your spare tire mount will no longer have the risk of losing a tire. The industrial solid iron and sandblasting process gives it a durable, smooth and attractive surface so you don't have to have bumpy roads.
- 【EASY TO INSTALL】Features a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
- 【WORRY-FREE VOUCHSAFING】GADFISH Spare tire carriers comes with 18 months of support and are rigorously tested before shipment. Please feel free to contact us if you have any questions regarding Carrier
installation. We will definitely give you a satisfying solution.
- Upgraded 3 Nut:3 Nut design can better lock the tire, reduce the vibration and noise when driving, thus avoiding the nut loosening and tire falling.
- Safe travel: Spare tire carrier
is made of high quality precision steel, powder coated surface, rust and corrosion resistant, maximum load capacity of 150 pounds, so that travel safety is no longer a hidden danger. - Bending design: Innovative multi-layer bending steel panels to enhance the bending resistance of 300%, reinforced and laser welded to provide three layers of protection for safe travel, can become your long-term old buddy.
- Wide Adaptability: No need to worry about the adaptability, the trailer spare tire mount is compatible with most wheels. Suitable for 4 lugs X 4"/4.25"/4.5" diameter holes, 5 lugs X 4.25"/4.5"/4.75"/5"/5.5" diameter holes, 6 lugs X 5.5"/6" diameter holes, 8 lugs X 6.5" diameter holes spare tires.
- Ready-to-install: Installation can be done in minutes. No drilling, one wrench to install and remove, complete with parts, no need to buy extra!
- Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern
- Mounts on trailer tongues up to 3 inch wide and 5 inch high
- Angled and raised mount design makes this ideal for boat trailers as well
- Durable powder coat finish to resist rust and corrosion
- Zinc plated mounting hardware
- ✅ Upgraded Tire Fit: Compatible most wheels with Compatible with Compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern.
- ✅ Wide Range Compatibility: This spare tire bracket mounts on trailer tongues up to 4" wide and 5" tall
- ✅ Heavy Duty Construction: The trailer spare tire mount is design to hold Max load up to 150 lbs with high quality forged iron. And power coated black paint finish make it rust and corrosion resistant
- ✅ Hardware Included: The included zinc-plated hardware make you can easily set up the spare tire mount to your trailer
- ✅ What You Get: Spare tire carrier
sets with hardware, our worry-free 18-month warranty and friendly customer service
- 【Widely use】Spare tire mount bracket fits for trailer frames up to 2" or 3" wide(the max tire size is up to 15"),and for 4 or 5 lug wheels (bolt styles: 4 on 4 or 5 on 4-1/2).
- 【Easy to use】Simply tighten the nut and the installation is complete.It will match most all trailer studs and nut sizes.
- 【Heavy duty construction】Made of heavy duty steel coated with zine to prevent rust and corrosion.
- 【Easy to place】Trailer spare tire mount is easy to place and fits nice for your spare tire on trailer.Thread length is 3inch.
- 【Package Included】1Pcs U-bolt tire bracket,2 nuts and gaskets.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





