NHTSA Campaign Number: 18E112
Manufacturer Cummins
Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 381
Air Compressor Belt Slippage Reducing Output
If the air compressor belt slips causing a reduction in compressor output and inhibiting the brake ability, which can increase the risk of a crash.
Summary
Cummins Inc. (Cummins) is recalling certain Cummins ISV5.0 light duty diesel engines equipped with CP80009 and C80007 air compressors. The air compressor belt may slip, reducing air compressor output, which can inhibit braking performance.
Remedy
Cummins will notify owners and dealers will replace the existing high mount refrigerant compressor configuration with a new low mount refrigerant compressor configuration, free of charge. The recall began February 1, 2019. Owners may contact Cummins customer service at 1-800-286-6467.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 18E-112
Cummins Campaign #C2101
February 1, 2019
Dear Cummins Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain ISV5.0 diesel engines that were manufactured between October 6, 2015 and October 6, 2017.
This notice applies to your engine(s) listed on the enclosed Engine/Vehicle list.
WHY IS A RECALL BEING CONDUCTED?
Certain ISV5.0 engines equipped with Option CP80009 installed in Blue Bird school buses may experience air compressor belt slippage resulting in decreased air compressor output. Air compressor belt slippage may impact vehicle air braking. If the condition progresses, and if audible and visible warnings are ignored, the vehicle will experience deterioration in air brake performance until, eventually, the parking brake is automatically applied, increasing the risk of a crash. Additionally, passengers being transferred from a disabled school bus may be at an increased risk of personal injury if the transfer occurs in a high traffic location.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Cummins has released field Safety Campaign #C2102 “ISV5.0 Belt Slip Safety Campaign for Blue Bird” to correct this condition by replacing the existing air compressor belt with a new shorter air compressor belt. Repair parts are currently available at Cummins Distributors and authorized Warranty Dealers for all engines in the affected production period. The repair will be completed free of charge and most applications will require approximately 1.5 hours to complete.
This safety recall addresses the potential safety defect for your engine. However, this repair will disable the rear air conditioner compressor. The front air conditioner compressor will not be affected. Cummins is currently developing a solution that will enable the rear air conditioner compressor and will notify you when this campaign is available.
WHAT SHOULD YOU DO?
This condition may result in low brake air pressure warnings (i.e. dashboard lamps and audible alarms). Pay close attention to any low brake air pressure warnings while driving or servicing your vehicle. If you observe any of these warnings, drive the vehicle to a safe location as soon as it is safe to do so.
Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete this repair.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
If you previously paid to have this recall performed on your vehicle, you may be eligible for reimbursement. Please contact Cummins Care at the number below for more information.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800CUMMINS (1-800-286-6467), or visit our website at care.cummins.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you are no longer the owner of the engine or vehicle listed in the table below, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.
Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator Cummins Inc.
*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 18E-112
Cummins Campaign #C2096
February 20, 2019
Dear Cummins Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain ISV5.0 diesel engines that were manufactured between May 29, 2015 and September 17, 2018.
Cummins previously mailed you an interim notice advising you of this recall and informing you that you would receive this second notice when the remedy is available.
This notice applies to your engine(s) listed in the table on the previous page of this letter.
WHY IS A RECALL BEING CONDUCTED?
Certain ISV5.0 engines equipped with Option CP80007 installed in Tiffin recreational vehicles may experience air compressor belt slippage resulting in decreased air compressor output. Air compressor belt slippage may impact vehicle air braking. If the condition progresses, and if audible and visible warnings are ignored, the vehicle will experience deterioration in air brake performance until, eventually, the parking brake is automatically applied, increasing the risk of a crash.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Cummins has released field Safety Campaign # C2096, “ISV5.0 Belt Slip Safety Campaign for Tiffin” to correct this condition by replacing the existing high mount refrigerant compressor configuration with a new low mount refrigerant compressor configuration. Repair parts are currently available at Cummins Distributors and authorized Warranty Dealers for all engines in the affected production period. The repair will be completed free of charge and most applications will require approximately 7 hours to complete.
WHAT SHOULD YOU DO?
This condition may result in low brake air pressure warnings (i.e. dashboard lamps and audible alarms). Pay close attention to any low brake air pressure warnings while driving or servicing your vehicle. If you observe any of these warnings, drive the vehicle to a safe location as soon as it is safe to do so.
Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete this repair.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
If you previously paid to have this recall performed on your vehicle, you may be eligible for reimbursement. Please contact Cummins Care at the number below for more information.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800-286-6467), or visit our website at care.cummins.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you are no longer the owner of the engine or vehicle listed in the table below, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.
Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator Cummins Inc.
*** IMPORTANT SAFETY RECALL ***
NHTSA Recall No. 18E-112
Month XX, YYYY
OEM Customer
XXXX Street Address
City, ST 12345-6789
Dear Cummins OEM Customer:
We are writing to inform you that Cummins Inc. has determined that a safety-related defect exists in certain ISV5.0 engines that were manufactured between March 16, 2015 and September 17, 2018. Cummins has initiated a recall of the subject engines. Our records indicate that some of these engines have been shipped to you.
A copy of Cummins’ initial Part 573 Defect Notification report is enclosed notification. This notification was submitted to the National Highway Traffic Safety Administration (“NHTSA”) on December 5, 2018. As more fully described in the notification, certain ISV5.0 light duty diesel engines equipped with Option CP80007 installed in Tiffin Motorhomes and with Option CP80009 installed in Blue Bird school buses may experience air compressor belt slippage resulting in decreased air compressor output. Air compressor belt slippage may impact vehicle air braking. If the condition progresses, and if audible and visible warnings are ignored, the vehicle will experience deterioration in air brake performance until, eventually, the parking brake is automatically applied, increasing the risk of a crash. Additionally, passengers being transferred from a disabled school bus may be at an increased risk of personal injury if the transfer occurs in a high traffic location.
Enclosed is a list of Engine Serial Numbers for affected engines that our records indicate were shipped to your plants. For engines installed in vehicles that have left your control, we encourage you to make a safety defect determination in accordance with 49 USC 30118 et seq. and, as appropriate, to submit a Defect Notification to NHTSA in accordance with 49 CFR Part 573. Cummins will conduct the recall, including notifying owners pursuant to 49 CFR Part 577, performing the remedy, and submitting quarterly status reports to NHTSA. Cummins is requesting that you provide the associated vehicle model identification, VINs and owner contact information to facilitate owner notification. Please work with your Cummins account team leader to ensure that the requested information is provided to Cummins as soon as possible.
For engines/vehicles that are still in your inventory, please contact the Owner Quality Assurance representative at the Columbus Engine Plant to arrange for repairs. Please note that Federal law prohibits delivery of these engines, or vehicles equipped with these engines, under a sale or lease until this condition has been remedied.
Cummins is working to determine the field remedy and will communicate this as soon as it is available.
Cummins apologizes for this inconvenience, but we are initiating this action in the interest of our customers’ safety and satisfaction with our products. Thank you for your assistance.
Please confirm receipt of this communication.
Sincerely,
Account Manager
Enclosures:
Belt Noise and Front Engine Accessory Drive Belt Re-routing: Tiffin Recreational Vehicles
TSB180058
27-Feb-2019
ISV 5.0L Belt Slip Safety Campaign for Tiffin RV
c2096
22-Feb-2019
ISV 5.0L Belt Slip Safety Campaign for Blue Bird Bus
c2101
25-Jan 2019
Safety Defect Notifications for certain ISV5,O CM3230 Engines
m1903
25-Jan 2019
C2096
12-Feb-2019
Owner Notification Letter
Cummins Campaign #C2101
February 1, 2019
Owner Notification Letter
Cummins Campaign #C2096
February 20, 2019
Manufacturer Notices
Recall Acknowledgement
December 21, 2018
Latest Recalls Documents
- Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley
- Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access
- Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters
- Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley.
- Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination.
- Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots.
- Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 7/8" female ratchet drive, and 3/8", 1/2" and 3/4" square adapters
- Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm.
- 【Professional Grade】This belt tensioner compressor tool easily removes and installs serpentine belts, tensioners, and air conditioning compressors, making vehicle maintenance quicker and easier for both DIY enthusiasts and professional mechanics
- 【Durable】Made from forged high-carbon steel with a rust-resistant coating, this serpentine belt tool is built to last, even under extreme torque conditions. The reinforced, non-slip handle reduces hand fatigue, ensuring long-lasting, comfortable use
- 【Universal Design】The adjustable tensioner arm seamlessly fits a variety of belt sizes, whether you are repairing the tensioner or other parts, this tensioner tool is an ideal choice for any vehicle repair
- 【Safe & Precise Operation】Protect belts components precision，the precision-machined design prevents accidental damage to belts, pulleys, or engine components, guaranteeing reliable
- 【Wide Compatibility】Compatible with 2017–2019 Kia
Niro, various GM models, and other vehicles. Designed to meet professional standards, this tool ensures reliable performance and peace of mind during every repair
- WIDE APPLICATIONS: This serpentine belt tool kit is used to adjust, remove and install serpentine belts on vehicles with spring-loaded tensioner pulleys. It makes changing the serpentine belt easier
- SOLID CONSTRUCTION & REACH: This ratcheting serpentine belt tool set is forged from chrome vanadium steel. The extended bar provides the necessary leverage to effectively access hard-to-reach areas
- EASY STORAGE: It comes with a plastic case, which makes it easy to carry and store your serpentine belt tensioner tool. The sizes are clearly marked on the tool and case, helping you to identify and organize all the parts
- EXTENDED REACH DESIGN: The 14" extension bar can be attached to the ratchet wrench, making it easier to access hard-to-reach areas such as narrow engine compartments and complex pulley systems
- YOU WILL GET: The serpentine belt tool kit includes a 14" extension bar, seven metric 6-point sockets (13 mm-19 mm), three crowfoot wrenches (13 mm-15 mm), three square adapters (3/8", 1/2" and 3/4"), a ratcheting wrench and a plastic storage case
- 【Professional Automotive Tools】: Quick Installation & Removal: Designed specifically for cars, trucks, and SUVs, efficiently installing and removing serpentine belts, tensioner pulleys, and air conditioning compressors. Suitable for both personal and commercial repair scenarios.
- 【Functionality】: Compresses belt tensioner spring when replacing the engine drive belt and alternator
- 【Services】: Fit for GM 2.4L EcoTec (Hybrid) 2011-2016 Buick Regal LaCrosse Chevrolet Malibu Impala & Captiva, Compare to GM factory tool EN-48932
- 【High-Strength Corrosion Resistance】: Forged from high-carbon steel and coated with rust-proof finish, it withstands extreme torque. Reinforced non-slip handle reduces hand fatigue during prolonged operation.
- 【Universal Adaptive Design】: One Tool for Multiple Uses: Adjustable tensioning arms accommodate various belt sizes without requiring multiple tool sets.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.