NHTSA Campaign Number: 18E112
Manufacturer Cummins
Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 381
Air Compressor Belt Slippage Reducing Output
If the air compressor belt slips causing a reduction in compressor output and inhibiting the brake ability, which can increase the risk of a crash.
Summary
Cummins Inc. (Cummins) is recalling certain Cummins ISV5.0 light duty diesel engines equipped with CP80009 and C80007 air compressors. The air compressor belt may slip, reducing air compressor output, which can inhibit braking performance.
Remedy
Cummins will notify owners and dealers will replace the existing high mount refrigerant compressor configuration with a new low mount refrigerant compressor configuration, free of charge. The recall began February 1, 2019. Owners may contact Cummins customer service at 1-800-286-6467.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 18E-112
Cummins Campaign #C2101
February 1, 2019
Dear Cummins Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain ISV5.0 diesel engines that were manufactured between October 6, 2015 and October 6, 2017.
This notice applies to your engine(s) listed on the enclosed Engine/Vehicle list.
WHY IS A RECALL BEING CONDUCTED?
Certain ISV5.0 engines equipped with Option CP80009 installed in Blue Bird school buses may experience air compressor belt slippage resulting in decreased air compressor output. Air compressor belt slippage may impact vehicle air braking. If the condition progresses, and if audible and visible warnings are ignored, the vehicle will experience deterioration in air brake performance until, eventually, the parking brake is automatically applied, increasing the risk of a crash. Additionally, passengers being transferred from a disabled school bus may be at an increased risk of personal injury if the transfer occurs in a high traffic location.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Cummins has released field Safety Campaign #C2102 “ISV5.0 Belt Slip Safety Campaign for Blue Bird” to correct this condition by replacing the existing air compressor belt with a new shorter air compressor belt. Repair parts are currently available at Cummins Distributors and authorized Warranty Dealers for all engines in the affected production period. The repair will be completed free of charge and most applications will require approximately 1.5 hours to complete.
This safety recall addresses the potential safety defect for your engine. However, this repair will disable the rear air conditioner compressor. The front air conditioner compressor will not be affected. Cummins is currently developing a solution that will enable the rear air conditioner compressor and will notify you when this campaign is available.
WHAT SHOULD YOU DO?
This condition may result in low brake air pressure warnings (i.e. dashboard lamps and audible alarms). Pay close attention to any low brake air pressure warnings while driving or servicing your vehicle. If you observe any of these warnings, drive the vehicle to a safe location as soon as it is safe to do so.
Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete this repair.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
If you previously paid to have this recall performed on your vehicle, you may be eligible for reimbursement. Please contact Cummins Care at the number below for more information.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800CUMMINS (1-800-286-6467), or visit our website at care.cummins.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you are no longer the owner of the engine or vehicle listed in the table below, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.
Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator Cummins Inc.
*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 18E-112
Cummins Campaign #C2096
February 20, 2019
Dear Cummins Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain ISV5.0 diesel engines that were manufactured between May 29, 2015 and September 17, 2018.
Cummins previously mailed you an interim notice advising you of this recall and informing you that you would receive this second notice when the remedy is available.
This notice applies to your engine(s) listed in the table on the previous page of this letter.
WHY IS A RECALL BEING CONDUCTED?
Certain ISV5.0 engines equipped with Option CP80007 installed in Tiffin recreational vehicles may experience air compressor belt slippage resulting in decreased air compressor output. Air compressor belt slippage may impact vehicle air braking. If the condition progresses, and if audible and visible warnings are ignored, the vehicle will experience deterioration in air brake performance until, eventually, the parking brake is automatically applied, increasing the risk of a crash.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Cummins has released field Safety Campaign # C2096, “ISV5.0 Belt Slip Safety Campaign for Tiffin” to correct this condition by replacing the existing high mount refrigerant compressor configuration with a new low mount refrigerant compressor configuration. Repair parts are currently available at Cummins Distributors and authorized Warranty Dealers for all engines in the affected production period. The repair will be completed free of charge and most applications will require approximately 7 hours to complete.
WHAT SHOULD YOU DO?
This condition may result in low brake air pressure warnings (i.e. dashboard lamps and audible alarms). Pay close attention to any low brake air pressure warnings while driving or servicing your vehicle. If you observe any of these warnings, drive the vehicle to a safe location as soon as it is safe to do so.
Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete this repair.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
If you previously paid to have this recall performed on your vehicle, you may be eligible for reimbursement. Please contact Cummins Care at the number below for more information.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800-286-6467), or visit our website at care.cummins.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you are no longer the owner of the engine or vehicle listed in the table below, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.
Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator Cummins Inc.
*** IMPORTANT SAFETY RECALL ***
NHTSA Recall No. 18E-112
Month XX, YYYY
OEM Customer
XXXX Street Address
City, ST 12345-6789
Dear Cummins OEM Customer:
We are writing to inform you that Cummins Inc. has determined that a safety-related defect exists in certain ISV5.0 engines that were manufactured between March 16, 2015 and September 17, 2018. Cummins has initiated a recall of the subject engines. Our records indicate that some of these engines have been shipped to you.
A copy of Cummins’ initial Part 573 Defect Notification report is enclosed notification. This notification was submitted to the National Highway Traffic Safety Administration (“NHTSA”) on December 5, 2018. As more fully described in the notification, certain ISV5.0 light duty diesel engines equipped with Option CP80007 installed in Tiffin Motorhomes and with Option CP80009 installed in Blue Bird school buses may experience air compressor belt slippage resulting in decreased air compressor output. Air compressor belt slippage may impact vehicle air braking. If the condition progresses, and if audible and visible warnings are ignored, the vehicle will experience deterioration in air brake performance until, eventually, the parking brake is automatically applied, increasing the risk of a crash. Additionally, passengers being transferred from a disabled school bus may be at an increased risk of personal injury if the transfer occurs in a high traffic location.
Enclosed is a list of Engine Serial Numbers for affected engines that our records indicate were shipped to your plants. For engines installed in vehicles that have left your control, we encourage you to make a safety defect determination in accordance with 49 USC 30118 et seq. and, as appropriate, to submit a Defect Notification to NHTSA in accordance with 49 CFR Part 573. Cummins will conduct the recall, including notifying owners pursuant to 49 CFR Part 577, performing the remedy, and submitting quarterly status reports to NHTSA. Cummins is requesting that you provide the associated vehicle model identification, VINs and owner contact information to facilitate owner notification. Please work with your Cummins account team leader to ensure that the requested information is provided to Cummins as soon as possible.
For engines/vehicles that are still in your inventory, please contact the Owner Quality Assurance representative at the Columbus Engine Plant to arrange for repairs. Please note that Federal law prohibits delivery of these engines, or vehicles equipped with these engines, under a sale or lease until this condition has been remedied.
Cummins is working to determine the field remedy and will communicate this as soon as it is available.
Cummins apologizes for this inconvenience, but we are initiating this action in the interest of our customers’ safety and satisfaction with our products. Thank you for your assistance.
Please confirm receipt of this communication.
Sincerely,
Account Manager
Enclosures:
Belt Noise and Front Engine Accessory Drive Belt Re-routing: Tiffin Recreational Vehicles
TSB180058
27-Feb-2019
ISV 5.0L Belt Slip Safety Campaign for Tiffin RV
c2096
22-Feb-2019
ISV 5.0L Belt Slip Safety Campaign for Blue Bird Bus
c2101
25-Jan 2019
Safety Defect Notifications for certain ISV5,O CM3230 Engines
m1903
25-Jan 2019
C2096
12-Feb-2019
Owner Notification Letter
Cummins Campaign #C2101
February 1, 2019
Owner Notification Letter
Cummins Campaign #C2096
February 20, 2019
Manufacturer Notices
Recall Acknowledgement
December 21, 2018
Latest Recalls Documents
- Designed to provide access and leverage to hard to reach pulleys
- COMFORT: Dipped handle for comfort and secure grip
- Durable contruction
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley.
- Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination.
- Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots.
- Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 7/8" female ratchet drive, and 3/8", 1/2" and 3/4" square adapters
- Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm.
- FAST BELT SERVICE : Replace serpentine belts faster with less effort. This serpentine belt tool releases spring-loaded belt tensioners, while the 540mm handle provides added leverage for better access in tight engine bays.
- COMPLETE TOOL KIT : This 13-piece serpentine belt tool kit includes crowfoot wrenches for low-clearance tensioners, 6-point sockets for standard pulleys, E-Torx sockets for European fasteners, plus a dual-drive wrench for 3/8" and 1/2" ratchets.
- LONG-REACH ACCESS : The slim, long-reach design provides the angle and leverage needed to loosen stubborn belt tensioners in confined spaces. This tensioner pulley tool reaches areas where standard ratchets and wrenches are difficult to operate.
- HEAVY-DUTY BUILD : Built from durable steel for strength and long service life. 50BV30 6-point sockets and 40Cr crowfoot wrenches resist wear, while the corrosion-resistant finish withstands repeated automotive repair.
- WIDE VEHICLE FITMENT : Compatible with most domestic and imported vehicles, including many European models using E-Torx fasteners. The custom EVA storage case keeps every belt tensioner tool organized, protected, and ready for transport or storage.
- 【PRECISE APPLICATION】 Designed specifically for removing and installing belts on serpentine systems equipped with spring-loaded idler pulleys. Ideal for accessing tight engine compartments where automatic belt tensioners are used, ensuring quick and hassle-free belt service.
- 【VEHICLE-SPECIFIC FITMENT】 Includes two drive bars tailored for multiple engine families: a 9" bar with 1/2" square drive compatible with Chrysler 2.5L, 3.0L and Ford 4.6L engines; plus a 23" bar with 3/8" square drive compatible with Ford 1.9L, 2.3L and GM 3.1L engines. Covers a wide range of domestic applications.
- 【CRITICAL USAGE NOTE】 Engineered exclusively for vehicles equipped with spring-loaded automatic belt tensioners. Not intended for manual tensioning systems—always verify your vehicle’s tensioner type before use to ensure proper fit and safe operation.
- 【SMART STORAGE BOX DESIGN】 Comes in a durable injection-molded storage box for organized, space-saving storage. Each part has its own designated position with clear dimension markings, eliminating guesswork and keeping your toolbox neat and efficient.
- 【COMPLETE 12-PIECE KIT】 Includes everything you need: 4 x sockets, 3 x crowfoot wrenches, 1 x 9" drive bar (1/2" square drive), and 1 x 23" drive bar (3/8" square drive). A comprehensive set for professional mechanics and DIYers tackling serpentine belt jobs.
- Professional Belt Replacement: This serpentine belt tool kit is designed for removing and installing serpentine belts on vehicles with spring-loaded tensioners. It makes changing the serpentine belt easier
- Extended Design for Tight Spaces: Featuring a 14" extension bar and a 9" ratcheting wrench, this belt tensioner tool can easily access tensioner pulleys in narrow engine compartments, to smoother operation and a better working experience
- Premium Materials: Made from chrome-vanadium steel, this serpentine belt tool kit offers excellent strength and hardness for dealing with high-torque applications. The polished finish simplifying maintenance after use
- Organized Storage: This serpentine belt tool set is neatly stored in a durable blow-molded case and the engraved sizes on the parts and case liner enable quick identification of the right key for the task at hand
- Package Includes: This serpentine belt tensioner kit contains a 14" extension bar, a ratchet wrench, 7 sockets, 3 crowfoot wrenches, and 3 adapters, covering multiple sizes for a range of serpentine belt service tasks
This product presentation was made with AAWP plugin.