NHTSA Campaign Number: 18E116
Manufacturer TAP Worldwide, LLC
Components EQUIPMENT
Potential Number of Units Affected 96
Tire Carrier Delete Plate/FMVSS 108, 111
If the high-mounted brake light is inoperable, it can limit the warning given to others that the vehicle is slowing or stopping. If the rear camera is inoperable, the driver may have reduced visibility of what is behind the vehicle. Either condition can increase the risk of a crash.
Summary
TAP Worldwide, LLC (TAP) is recalling certain Poison Spyder Customs Tire Carrier
Delete Plates, part number 19-04-012P1, sold as aftermarket parts. These Tire Carrier
Delete Plates may not provide a license plate illumination lamp, may interfere with the center high-mounted brake light positioning, and may also cause the rear visibility system to be inoperable. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment,” and number 111, “Rearview Mirrors.”
Remedy
TAP will notify owners, and dealers will replace the Poison Spyder Tire Carrier
Delete Plates, free of charge. The recall began February 12, 2019. Owners may contact TAP customer service at 1-888-376-1417.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
RECALL NO. 18E-116
IMPORTANT SAFETY RECALL
This notice applies to your Poison Spyder Tire Carrier
Delete Plate, part number 19-04-012P1. This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Date: February 12, 2019
Dear Valued TAP Worldwide, LLC Customer,
REASON FOR NOTICE
TAP Worldwide, LLC has decided that the above-referenced Poison Spyder Tire Carrier
Delete Plate does not comply with FMVSS 108 because the product does not provide a license plate lamp and could interfere with the center high-mounted stop lamp positioning. An inoperable center highmounted stop lamp may not properly alert following vehicles that the driven vehicle is coming to a stop, which could increase the risk of a crash.
TAP Worldwide, LLC has also determined that the above-referenced Poison Spyder Tire Carrier
Delete Plate does not comply with FMV SS 111 because the product renders the rear visibility system (back-up camera) inoperable. Because the rear visibility system does not operate as intended with the Poison Spyder Tire Carrier
Delete Plate installed, there could be an increased risk of death or injury resulting from a back-over incident if the driver of the vehicle does not check his or her surroundings before reversing.
WHAT SHOULD YOU DO
You should contact TAP Worldwide, LLC’s Recall Parts Assistance Department by phone at 1888-376-1417 or by email at [email protected] immediately to identify the recommended service facility closest to you that can provide and/or install a replacement Poison Spyder Tire Carrier
Delete Plate (or provision which corrects the issues referenced above). Alternatively, you may request that the replacement Poison Spyder Tire Carrier
Delete Plate (or provision which corrects the issues referenced above) be sent to your home address, so that you can install it yourself using the attached instructions.
WHAT WE WILL DO
TAP Worldwide, LLC has created a replacement Poison Spyder Tire Carrier
Delete Plate and a provision that will include the original equipment back-up camera and will not interfere with the license plate lamp or center high-mounted stop lamp, free of charge. The replacement parts will be available starting February 15, 2019.
REIMBURSEMENT
If you have already paid to address the issues covered by this recall, you may be eligible to have those costs reimbursed. Requests for reimbursement may include the cost(s) of parts, labor, fees and taxes; however, expenses for inconvenience you may have suffered due to the loss of use of your vehicle will not be reimbursed. Reimbursement will be limited to the amount the repair would have cost if completed by an authorized service facility.
To be eligible for reimbursement:
- You must have had the subject part repaired before receiving this notice, and
- You must have owned the vehicle at the time of repair.
NOTE: You will still be eligible for reimbursement even if you no longer own the vehicle.
Your reimbursement claim will be acted upon within sixty (60) days after receipt. If your claim is approved, you will receive a check in the mail. If your claim is denied, you will receive a letter setting forth the reason(s) for the denial. If your claim is deemed incomplete, you will receive a letter identifying the supplementation needed to complete the claim, and you will be offered an opportunity to resubmit it.
To file a claim for reimbursement, please contact the TAP Worldwide, LLC Recall Parts Assistance Department toll free by phone at 1-888-376-1417 or by email at [email protected]. Please be prepared to provide the following information:
- Your name; o Your mailing address;
- Your e-mail address;
- Your phone number;
- The applicable recalled part name and/or number;
- The date(s) the repair was performed; and
- The amount of the reimbursement you are requesting.
Please also be prepared to submit original or clear copies of all receipts, invoices, and/or repair orders showing:
- The name and address of the person who paid for the repair;
- The part name and number of the item that was repaired;
- The 17-digit Vehicle Identification Number of the vehicle that was repaired (if applicable);
- The total cost of the repair expense that is being claimed; and
- Proof of payment for the repair in question and the date of the payment.
Failure to include proper documentation may delay your reimbursement. Alternatively, you may fill out the Claim Form enclosed with this recall notice and submit it, together with the documentation referenced above, by mail to the address listed in the Claim Form. If you have questions, please call the TAP Worldwide, LLC Recall Parts Assistance Department toll free at 1888-376-1417.
CONTACT INFORMATION
If you have any questions regarding this matter, if you have any problems obtaining the needed repair and/or reimbursement, or if you believe that the repair has not been made within a reasonable period of time, you may contact us by phone at 1-888-376-1417, by email at [email protected], or by mail to the following address:
TAP Worldwide, LLC
Attn: Recall Parts Assistance
400 West Artesia Boulevard
Compton, California 90220 USA
If, after contacting TAP Worldwide, LLC, you still have a problem getting this repair made within a reasonable period of time and/or without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington DC 20590; or call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 1800-424-9153); or go to https://www.safecar.gov. If you are a vehicle lessor, federal law requires that you forward a copy of this recall notice to the lessee within ten (10) days.
Your continued satisfaction with our products is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We regret any inconvenience that this action may cause you.
Sincerely,
TAP Worldwide, LLC
Owner Notification Letter
February 12, 2019
Recall Acknowledgement
February 6, 2019
Latest Recalls Documents
- 【150 LBS HEAVY DUTY】This spare tire bracket is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place and holds up to 150 Lbs.
- 【WIDE APPLICABILITY】Our spare tire carrier
compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern. Because of its universal compatibility, it is also suitable for boat trailers. - 【Robust Construction】Once the screws are tightened, your spare tire mount will no longer have the risk of losing a tire. The industrial solid iron and sandblasting process gives it a durable, smooth and attractive surface so you don't have to have bumpy roads.
- 【EASY TO INSTALL】Features a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
- 【WORRY-FREE VOUCHSAFING】GADFISH Spare tire carriers comes with 18 months of support and are rigorously tested before shipment. Please feel free to contact us if you have any questions regarding Carrier
installation. We will definitely give you a satisfying solution.
- Upgraded 3 Nut:3 Nut design can better lock the tire, reduce the vibration and noise when driving, thus avoiding the nut loosening and tire falling.
- Safe travel: Spare tire carrier
is made of high quality precision steel, powder coated surface, rust and corrosion resistant, maximum load capacity of 150 pounds, so that travel safety is no longer a hidden danger. - Bending design: Innovative multi-layer bending steel panels to enhance the bending resistance of 300%, reinforced and laser welded to provide three layers of protection for safe travel, can become your long-term old buddy.
- Wide Adaptability: No need to worry about the adaptability, the trailer spare tire mount is compatible with most wheels. Suitable for 4 lugs X 4"/4.25"/4.5" diameter holes, 5 lugs X 4.25"/4.5"/4.75"/5"/5.5" diameter holes, 6 lugs X 5.5"/6" diameter holes, 8 lugs X 6.5" diameter holes spare tires.
- Ready-to-install: Installation can be done in minutes. No drilling, one wrench to install and remove, complete with parts, no need to buy extra!
- Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern
- Mounts on trailer tongues up to 3 inch wide and 5 inch high
- Angled and raised mount design makes this ideal for boat trailers as well
- Durable powder coat finish to resist rust and corrosion
- Zinc plated mounting hardware
- ✅ Upgraded Tire Fit: Compatible most wheels with Compatible with Compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern.
- ✅ Wide Range Compatibility: This spare tire bracket mounts on trailer tongues up to 4" wide and 5" tall
- ✅ Heavy Duty Construction: The trailer spare tire mount is design to hold Max load up to 150 lbs with high quality forged iron. And power coated black paint finish make it rust and corrosion resistant
- ✅ Hardware Included: The included zinc-plated hardware make you can easily set up the spare tire mount to your trailer
- ✅ What You Get: Spare tire carrier
sets with hardware, our worry-free 18-month warranty and friendly customer service
- 【Widely use】Spare tire mount bracket fits for trailer frames up to 2" or 3" wide(the max tire size is up to 15"),and for 4 or 5 lug wheels (bolt styles: 4 on 4 or 5 on 4-1/2).
- 【Easy to use】Simply tighten the nut and the installation is complete.It will match most all trailer studs and nut sizes.
- 【Heavy duty construction】Made of heavy duty steel coated with zine to prevent rust and corrosion.
- 【Easy to place】Trailer spare tire mount is easy to place and fits nice for your spare tire on trailer.Thread length is 3inch.
- 【Package Included】1Pcs U-bolt tire bracket,2 nuts and gaskets.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





