June 14, 2019 NHTSA CAMPAIGN NUMBER: 19V462000
Boom Support Plate May Obscure Visibility
The lack of visibility may increase the risk of crash. The detachment of the boom and cradle may become a road hazard, increasing the risk of crash.
NHTSA Campaign Number: 19V462
Manufacturer Caterpillar
Inc.
Components UNKNOWN OR OTHER
Potential Number of Units Affected 6
Summary
Caterpillar Inc. (Caterpillar) is recalling certain 2015-2019 Progress Rail 75HRT SkyTrim Hi-Rail vehicles. The boom cradle includes a support plate that may block the driver’s visibility. Additionally, the slew may be insufficient, which may result in the detachment of the boom from the cradle while the vehicle is in motion.
Remedy
Caterpillar will notify owners, and Progress Rail dealers will relocate the boom cradle to provide visibility for the driver, and revise the boom hydraulic circuit to prevent an inadvertent boom in the event of a hose failure or leak. These repairs will be performed free of charge. The recall began August 12, 2019. Owners may contact Caterpillar customer service at 1-800-447-4986.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
August 2, 2019
IMPORTANT SAFETY RECALL
THIS NOTICE APPLIES TO THE FOLLOWING VEHICLE(S)
SERIAL/PIN / VIN # 5KKHAV
(Example VIN shown)
SAFETY – RECALL – Defect in Boom Cradle and Slew, NHTSA Recall #19V-462
MODELS INVOLVED – 75HRT SkyTrim Hi-Rail Mobile Units
Dear SkyTrim Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Progress Rail has determined that defects which relate to motor vehicle safety exist on the 75HRT SkyTrim Hi-Rail Mobile Units with certain hydraulic and construction features.
The SkyTrim units affected were manufactured between August 2015 – April 2019. In the event of a hydraulic system failure (such as a hose burst), certain SkyTrim 75HRT hydraulic circuits that control the swing of the upper boom structure could allow the boom to drift and potentially swing into motor vehicle traffic. A hydraulic system holding valve must be relocated to prevent this possibility.
The SkyTrim units produced between August 2015 – April 2019 may also have an upper platform that is located directly above the operator’s cab that contains a boom rest mount which can interfere with the operator’s ability to see the end of the saw head assembly. Failure to see the end of the saw head assembly could result in the operator infringing upon or contacting other structures or vehicles that are not in the line of sight.
Components necessary for the remedy are available at this time. Progress Rail Services will contact you via telephone to schedule a service visit and will perform this service to correct the hydraulic valve relocation and modification to the SkyTrim 75HRT unit(s) at your business location free of charge. Alternatively, you may contact Progress Rail Services at your earliest convenience to arrange for the repair of the SkyTrim 75HRT unit(s).
Until Progress Rail is able to complete the necessary service, we recommend that SkyTrim operators: (1) increase their following distance while in traffic due to limited visibility to the end of boom; (2) take note and remain vigilant regarding overhead clearance needs due to the limited visibility to end of the boom; and (3) perform a walk-around visual inspection of the boom prior to beginning movement via a road or highway to ensure hydraulic hoses to the boom are leak free and intact.
You received this notification because government regulations require that notification be sent to the last known owner of record. If you are a lessor of these vehicles, you must forward this letter to your lessee within ten days.
If you no longer own the vehicle, please contact Progress Rail at (334) 387-9307.
If you have any questions about this recall or which vehicle(s) may be affected, please contact:
Progress Rail Services Corp.
10650 Highway 80 East, Montgomery, AL 36117
Attn: Robin Intagliata
Telephone: (334) 387-9307
If you believe that Progress Rail has failed or is unable to remedy the defect in your vehicle, without charge, within a reasonable period of time, you may submit a complaint to the Adminstrator at:
In the U.S.
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, S.E.
Washington, D.C. 20590
Telephone: 1-888-327-4236 (TTY:1-800-424-9153) or go to
https://www.safercar.gov
We regret the inconvenience this may cause you, but urge you to have this service performed for your safety and satisfaction as soon as possible.
5 Affected Products
Vehicle
| PROGRESSIVE RAIL SERVICES | SKY TRIM | 2015-2019 |
6 Associated Documents
Recall 573 Report- Amendment 2
RCLRPT-19V462-3280.PDF 216.049KB
Recall Acknowledgement
RCAK-19V462-1293.pdf 245.381KB
Defect Notice 573 Report
RCLRPT-19V462-1007.PDF 214.21KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V462-6471.PDF 211.118KB
Owner Notification Letter(Part 577)
RCONL-19V462-3531.pdf 535.449KB
Recall 573 Report- Amendment 1
RCLRPT-19V462-7388.PDF 214.143KB
Latest Recalls Documents
- Meets and exceeds all OEM specifications for power shift transmissions
- Extends equipment and fluid life
- Reduces downtime and major overhaul
- MAG 1 AW ISO 32 Hydraulic Oil is designed to help improve uptime, reduce costs and increase productivity.
- Formulated to provide 5,000 hours of oxidation stability. Our hydraulic oils offer energy-efficient benefits and improved performance across a wide range of temperatures.
- They specifically designed to meet the demands of high-pressure, industrial and mobile equipment hydraulic systems.
- Superior quality, universal hydraulic fluid designed to mix with all hydraulic fluids in power trim and steering systems
- Protects seals and hoses, and prevent foaming, oxidation and corrosion
- Prevents foaming
- Recommended for all outboard and sterndrive applications except electric power steering systems
This product presentation was made with AAWP plugin.