August 13, 2019 NHTSA CAMPAIGN NUMBER: 19V592000
Air Bags Cushions May Not Properly Inflate
In the event of a crash, if the cushions do not inflate properly, they may not provide the intended protection to the occupant, increasing the risk of injury.
NHTSA Campaign Number: 19V592
Manufacturer E-One
Incorporated
Components AIR BAGS
Potential Number of Units Affected 10
Summary
E-One Incorporated (E-One) is recalling certain 2019 Typhoon and Cyclone II fire trucks. Due to improper manufacturing, the cushion of the Inflatable Head Cushion (IHC) and Knee Air Bag (KAB) may detach during a deployment event and not inflate.
Remedy
E-One will notify owners, and dealers will replace the air bags, free of charge. The recall began November 12, 2019. Owners may contact E-One customer service at 1-352-861-3612.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
WORK INSTRUCTIONS
Knee Airbag (KAB)
NOTICE
These work instructions are ONLY applicable to suspect airbag units being recalled on IMMI Recall Dated 07/25/2019. Following these instructions will safely disable the suspect airbag until replacement parts are available.
PLEASE READ ENTIRE GUIDE BEFORE BEGINNING WORK
- DISCONNECT POWER TO VEHICLE; either by placing Battery Disconnect Switch in off position or by disconnecting the vehicle battery.
- Locate the serial number on the product.
This may involve removing the unit from the truck to see the serial number label.
Before proceeding to step 3, verify airbag serial number is officially being recalled
- Unplug the airbag unit from the vehicle wiring harness.
- Cut airbag side of wires 3″ from the airbag unit.
- Strip wire insulation 1/2″ on each wire
- Twist the wires together by using supplied wire nut or by using a butt splice.
- Apply AIRBAG INOPERABLE label to the unit visible to the occupant, making sure to cover up the existing SRS label.
- Install provided terminating resistor into the vehicle wiring harness,
- Power up the vehicle and verify the fault light self-extinguishes after 5 seconds.
- For questions or more information, contact:
WORK INSTRUCTIONS
Inflatable Head Curtain (IHC)
NOTICE
These work instructions are ONLY applicable to suspect airbag units being recalled on IMMI Recall Dated 07/25/2019. Following these instructions will safely disable the suspect airbag until replacement parts are available.
PLEASE READ ENTIRE GUIDE BEFORE BEGINNING WORK
l . DISCONNECT POWER TO VEHICLE; either by placing Battery Disconnect Switch in off position or by disconnecting the vehicle battery.
- Locate the serial number on the product.
This may involve removing the unit from the truck to see the serial number label.
Before proceeding to step 3, verify airbag serial number is officially being recalled.
- Unplug the airbag unit from the vehicle wiring harness.
- Cut airbag side of wires 3″ from the airbag unit.
- Strip wire insulation 1/2″ on each wire.
- Twist the wires together by using supplied wire nut or by using a butt splice.
- Apply AIRBAG INOPERABLE label to the unit visible to the occupant, making sure to cover up the existing SRS label.
- Install provided terminating resistor into the vehicle wiring harness.
- Power up the vehicle and verify the fault light self-extinguishes after 5 seconds.
- For questions or more information, contact:
IMMI Technical Support at 317-867-8391 or 317-867-8323
PN957141 REVOI 7525P
November 11, 2019
IMPORTANT SAFETY RECALL: 19V-592
IMMI IHC and/or KAB Airbag Assembly
This notice applies to your vehicle VIN: X
UNIT: 1
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
E-ONE has decided that a defect which relates to motor vehicle safety exists in certain models of the following emergency vehicles manufactured between April 2019 – September 2019, equipped with IMMI IHC and/or KAB Airbag Assembly:
E-ONE Models: PSEM-TYPH, AERM-CYC2, PMPR-CYC2, PSLS-TYPH, PSRSTYPH, PSTT-TYPH, REHN-CYC2
WHY IS A RECALL BEING CONDUCTED?
Under normal deployment, the airbag cushion, as part of the IHC and/or KAB assemblies, may not be retained on the inflation gas line resulting in an incomplete inflation of the cushion or no retention of pressure in the cushion during deployment.
The safety risk to the occupant is that the IHC/KAB may not fully inflate and therefore may not provide the intended supplemental protection to the occupant. There are no warnings that precede this.
The affected item is the IMMI IHC and/or KAB Airbag Assembly.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Owners will be notified by mail about the recall and will be instructed to contact E-ONE/E-ONE Dealers to have the replacement items installed. E-ONE will install the new components and reimburse dealers/customers for all costs of parts and labor. It will take approximately 30 minutes to 1 hour per component, depending on the component, to perform the work. There is no cost to owners for this recall.
WHAT SHOULD YOU DO?
If you receive this notification, please contact your E-ONE Dealer or E-ONE at 1-352-237-1122 to schedule an appointment to have the repairs performed.
INCLUDED WITH THIS LETTER IS AN OWNER RESPONSE CARD THAT MUST BE FILLED OUT AND RETURNED TO E-ONE IN ORDER TO BE REIMBURSED. Please have your Truck VIN available. After your repair has been completed, please fill in the appropriate information on the enclosed Owner Response Postcard, sign it, and mail it to:
E-ONE, 1601 SW 37th Ave, Ocala, FL, 34474.
If you prefer to contact E-ONE directly, feel free to contact our Customer Service at 1-352-2371122. Please have your Truck VIN available.
WHAT IF YOU NO LONGER OWN THIS E-ONE Models: PSEM-TYPH, AERM-CYC2, PMPRCYC2, PSLS-TYPH, PSRS-TYPH, PSTT-TYPH, REHN-CYC2?
If you no longer the current owner of the vehicle, please indicate this on the Owner Response Postcard and return the card to E-ONE, 1601 SW 37th Ave, Ocala, FL, 34474.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have any questions or concerns, please contact E-ONE Customer Service at 1-352-2371122. Please have your Truck VIN available.
If you are the lessor of this vehicle, please forward a copy of this notice to the lessee within ten days to comply with federal regulations
If you have already paid to have your E-ONE Models: PSEM-TYPH, AERM-CYC2, PMPR-CYC2, PSLS-TYPH, PSRS-TYPH, PSTT-TYPH, REHN-CYC2 repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. To learn more about what you need to do to obtain reimbursement call E-ONE Customer Service at 1-352-237-1122 and instructions will be provided. Please have your Truck VIN available.
If after having attempted to take advantage of this recall you believe you have not been able to have your E-ONE Models: PSEM-TYPH, AERM-CYC2, PMPR-CYC2, PSLS-TYPH, PSRSTYPH, PSTT-TYPH, REHN-CYC2 remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1- 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this safety recall may cause, but your safety is our first concern.
Sincerely,
E-ONE, Inc.
2 Affected Products
Vehicles
6 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V592-2885.PDF 211.228KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V592-0478.PDF 211.125KB
Recall Acknowledgement
RCAK-19V592-1968.pdf 245.309KB
Defect Notice 573 Report
RCLRPT-19V592-2831.PDF 215.859KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V592-7546.pdf 73.178KB
Remedy Instructions and TSB
RCRIT-19V592-1004.pdf 799.335KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by monitoring current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for today’s vehicles with strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW. Enhanced communication on select 2024+ Nissan and Mazda models (see compatibility chart).
- [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM 2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
- 【S-ave 💰1,000+ in Repairs】 Most basic code readers only check the engine system, and many 4-system obd2 scanners don't offer any resets. The FOXWELL NT614 Elite changes the game. It's a powerful 4-system car scanner loaded with 5 essential service functions, making daily maintenance faster and ch-eaper. Now upgraded with one-tap WiFi updates - no more slow Micro SD cards, no account setup, and no complicated software. Enjoy smoother performance and instant access to I/M Readiness, Battery Test, and built-in DTC Lookup
- ✅【WHY 5 RESETS? - BUILT FOR DIY MECHANICS】 The NT614 Elite scan tool is upgraded from NT604, adding 5 core service resets DIY car owners actually need: ABS Bleeding, EPB Reset, Oil Reset, SAS Calibration, and Throttle Relearn. Reset warning lights, maintain brake performance, and complete everyday maintenance at home. A practical ABS reset tool and EPB reset scanner designed for real-world car repair
- ✅【BEYOND BASIC CODE READERS - 4 SYSTEMS DIAGNOSTIC】 Cheap one-way readers only scan engine codes. The NT614 Elite car diagnostic scanner tells you exactly which system is failing and why. Read and clear codes across four critical systems: Engine, ABS (Anti-lock Brakes), SRS (Airbag), and Transmission. View real-time live data including coolant temperature, wheel speed, transmission fluid temperature, throttle position, etc. Whether your check engine light is on or your ABS/airbag warning appears, pinpoint problems quickly and accurately – no more guesswork.
- ✅【15 SECONDS FAST DIAGNOSIS, SMART AUTOVIN, PLUG & PLAY】 Simply plug into the OBD2 port, one click AUTOVIN, the code reader automatically retrieves your VIN and enters diagnostic mode in about 15 seconds. No complicated setup required. Instantly identify your vehicle and access the relevant systems. Whether you're a DIY car owner, beginner, or mechanic, you can quickly locate problems and make informed repair decisions. (NOTE: 1.A few cars need to manually enter the VIN. 2.Vehicles with CAN protocol support fast diagnosis in 15 seconds)
- ✅【PERFORM ABS BLEEDING AT HOME – RESTORE BRAKE PEDAL FEEL】 After replacing brake pads, calipers, or brake fluid, air can enter the brake system, causing a soft or sinking brake pedal and longer stopping distance. The NT614 Elite code reader for cars and trucks supports ABS Bleeding, helping remove trapped air from the brake lines and restore proper brake pressure. Maintain safer braking performance without a shop visit. (NOTE: A few cars don't support ABS Bleeding function, pls check it before purchase）
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
This product presentation was made with AAWP plugin.