September 18, 2019 NHTSA CAMPAIGN NUMBER: 19V665000
A hood that opens while driving can reduce the driver’s visibility, increasing the risk of a crash.
NHTSA Campaign Number: 19V665
Manufacturer Daimler Vans
USA, LLC
Components LATCHES/LOCKS/LINKAGES
Potential Number of Units Affected 52,004
Summary
Daimler Vans USA, LLC (DVUSA) is recalling certain 2018-2019 Mercedes-Benz and Freightliner Sprinter vehicles. The screw connection on the upper hood catch may have been improperly tightened. As a result, factors such as the vehicle’s speed, wind resistance and road conditions may cause the hood to open while the vehicle is being driven.
Remedy
DVUSA will notify owners, and dealers will inspect the screw connection, tightening it as necessary, free of charge. The recall began November 1, 2019. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA’s number for this recall is VS3HAUBOSS.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Vans Recalls
| TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Anthony Washington, Department Manager, Regulations and Certifications |
| RE: Initial Recall Campaign Notification Model 907 (Sprinter )Model Years 2019 Screw Connection Hood Catch | DATE: October 4, 2019 |
IMPORTANT CAMPAIGN INFORMATION
| Campaign No. : | Campaign Desc. : | Screw Connection Hood Catch | |
| 2019090016 | PDGHAUBOSS | ||
| This is to notify you of the upcoming Recall Campaign concerning the screw connection on the upper hood catch on approximately 5,626 MY19 Mercedes-Benz Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected VINs will be flagged as โPendingโ in VMI. | |||
|
Background | |||
|
Issue | Daimler AG (โDAGโ), the manufacturer of Mercedes-Benz Sprinter vans, has determined that, the screw connection on the upper hood catch of certain Mercedes-Benz Sprinter vehicles (VS30; Platforms 907) may not have been carried out according to specification. Depending on vehicle speed, wind resistance, aerodynamic drag and factors such as vehicle loading and road conditions, the hood could open while the vehicle is being operated. If the hood were to open while driving, it could impact the driver’s field of vision, thereby increasing the risk of a crash. | ||
| What Weโre Doing | An authorized Mercedes-Benz Sprinter dealer will check and if necessary tighten the torque of the screw connection. Any missing screws will be replaced if necessary. | ||
|
Vehicles Affected | |||
| Vehicle Model Year(s) | Model Year 2019 | ||
| Vehicle Model | Sprinter, VS30 / Platform 907 | ||
|
Vehicle Populations | |||
| Total Recall Population | 5,626 | ||
| Dealer Inventory | 751 | ||
| Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new MY19 Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired.
Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new MY19 Sprinter vehicles covered by this notification until the vehicle has been repaired. | |||
|
Next Steps/Notes | |||
| Customer Notification Timeline | An owner notification letter will be mailed in early November, 2019. | ||
| AOMS/SOMS | AOMs โ This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | ||
| Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer. | ||
| While we regret any inconvenience this may cause, DVUSA is determined to maintain a high level of vehicle quality and customer satisfaction. | |||
| TO: Mercedes-Benz Dealer Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Anthony Washington, Department Manager, Regulations and Certifications |
| RE: Recall Campaign Notification Model 907 (Sprinter )Model Years 2019 Screw Connection Hood Latch | DATE: October 17, 2019 |
IMPORTANT RECALL CAMPAIGN INFORMATION
RECALL CAMPAIGN LAUNCH NOTIFICATION
October 17, 2019
| Campaign No. : | Campaign Desc. : | Screw Connection Hood Catch | |
| 2019100006 | VS3HAUBOSS | ||
| This is to notify you of the upcoming Recall Campaign concerning the screw connection on the upper hood catch on approximately 3,817 MY19 Mercedes-Benz Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected VINs will be flagged as โOpenโ in VMI on October 18, 2019. | |||
| Background | |||
|
Issue | Daimler AG (โDAGโ), the manufacturer of Mercedes-Benz Sprinter vans, has determined that, the screw connection on the upper hood catch of certain Mercedes-Benz Sprinter vehicles (VS30; Platforms 907) may not have been carried out according to specification. Depending on vehicle speed, wind resistance, aerodynamic drag and factors such as vehicle loading and road conditions, the hood could open while the vehicle is being operated. If the hood were to open while driving, it could impact the driver’s field of vision, thereby increasing the risk of a crash. | ||
| What Weโre Doing | An authorized Mercedes-Benz Sprinter dealer will check and if necessary tighten the torque of the screw connection. Any missing screws will be replaced if necessary. | ||
| Vehicles Affected | |||
| Vehicle Model Year(s) | Model Year 2019 | ||
| Vehicle Model | Sprinter, VS30 / Platform 907 | ||
| Vehicle Populations | |||
| Total Recall Population | 3,817 | ||
| Dealer Inventory | 500 | ||
| Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new MY19 Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired.
Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new MY19 Sprinter vehicles covered by this notification until the vehicle has been repaired. | |||
| Next Steps/Notes | |||
| Customer Notification Timeline | An owner notification letter will be mailed in early November, 2019. | ||
| AOMS/SOMS | AOMs โ This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | ||
|
Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective MBUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA dealer. | ||
| While we regret any inconvenience this may cause, DVUSA is determined to maintain a high level of vehicle quality and customer satisfaction. | |||
Campaign No. 2019100006, October 2019
| TO: | ALL MERCEDES-BENZ CENTERS |
| SUBJECT: | Model 907 (Sprinter), Model Year 2019 Screw Connection Hood Catch |
Daimler AG (โDAGโ), the manufacturer of Mercedes-Benz Sprinter vans, has determined that, the screw connection on the upper hood catch of certain Mercedes-Benz Sprinter vehicles (VS30; Platforms 907) may not have been carried out according to specification. Depending on vehicle speed, wind resistance, aerodynamic drag and factors such as vehicle loading and road conditions, the hood could open while the vehicle is being operated.If the hood were to open while driving, it could impact the driver’s field of vision, thereby increasing the risk of a crash.An authorized Mercedes-Benz Sprinter dealer will check and if necessary tighten the torque of the screw connection. Any missing screws will be replaced if necessary.
Prior to performing this Recall Campaign:
- Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously
- Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as
Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.
Approximately 3,817 vehicles are involved.
Order No. V-RC- 2019100006
Warranty Information
Operation items and work units
| Operation number | Operation text | Labor Time (hrs.) | Damage Code |
| 02 1582 | Check 2 screws on the hood catch, retighten | 0.2 | 88 922 52 7 |
1 Hood catch upper section
6 Bolts
Procedure
| Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A |
| Check | |||
| 1 | Check whether vehicle is affected by measure. | Affected vehicles: Model 907.### #P as of 000564 up to 138412
For authorized Mercedes | SM88.40-D-0017-01AAA
SM88.40-D-0017-01AAB |
| 2 | Check whether the screws (6) are present. | If a screw (6) are not present,
โ screw in missing screw (6) subsequently by hand. | |
| Retighten Screws | |||
| 3 | Retighten screws (6). | Bolt, upper section of hood catch to hood | BA88.40-N-1003-01TS |
Engine hood
| Number | Designation | Model 907 |
| BA88.40-N-1003-01TS | Bolt, upper section of hood catch | 8Nm |
Parts ordering note
| Part no. | Designation | Quantity |
| N 000000 001475 | Screw, upper part of hood catch | As needed |
IMPORTANT SAFETY RECALL #2019100006
This notice applies to your vehicle
VIN: WD3PE7CC0
Hood Catch Screw Connection
NHTSA Recall #19V665
November, 2019
- A safety defect exists in your vehicle
- Schedule an appointment with your authorized Freightliner Sprinter dealer as soon as possible.
- This repair will be provided free of charge.
Dear Freightliner Sprinter Owner,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler AG (โDAGโ), the manufacturer of Freightliner Sprinter vans, has decided that a defect which relates to motor vehicle safety exists in certain Model Year 2019 Freightliner Sprinter vehicles. Our records indicate that your vehicle is included in the affected population of vehicles.
| What is the CONCERN? | DAG determined that, the screw connection on the upper and lower hood catch of certain Freightliner Sprinter vehicles (VS30; Platforms 907) may not have been carried out according to specification. Depending on vehicle speed, wind resistance, aerodynamic drag and factors such as vehicle loading and road conditions, the hood could open while the vehicle is being operated. If the hood were to open while driving, it could impact the driver’s field of vision, thereby increasing the risk of a crash. |
| What will your DEALER DO? | An authorized Mercedes-Benz Sprinter dealer will check and if necessary tighten the torque of the screw connection. This service will be provided free of charge. While the minimum repair time is approximately 20 minutes, your dealer can provide you with a better estimate of the overall time for this service visit. As a matter of normal service process, an authorized Freightliner dealer will also check for other repair measures which might be applicable to your vehicle and this may increase the required working time. You will not be charged for other service or repairs unless so requested. |
Schedule an appointment immediately at your preferred authorized Freightliner Sprinter Dealer. See www.freightlinersprinterusa.com/freightliner/owners-resources/recall for the Dealer Locator. Please mention you are scheduling an appointment to check and if necessary tighten the torque of the screw connection under Recall Campaign # 2019100006. You may be asked for your 17-digit Vehicle Identification Number (VIN) which for your convenience is located above your name at the top of this letter.
We encourage you to sign up for recall alerts at www.nhtsa.gov/alerts. In the event that you are no longer the vehicle owner, or have had a change of address, please complete the reverse side and return the updated information in the enclosed envelope.
If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal Regulations.
Should you have any questions difficulty regarding this Recall Campaign, please contact an authorized Freightliner dealer. If for any reason a dealer is unable to remedy your situation, we are always happy to hear from you. Please contact us at 1-877-762-8267.
If an authorized Freightliner dealer for any reason is unable to remedy the situation without charge, or within a reasonable amount of time, pursuant to law 49 U.S.C. Chapter 301, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this situation may cause you, but your safety is of utmost concern to Freightliner. Sincerely,
Daimler Vans USA, LLC
One Mercedes-Benz Drive
Sandy Springs, GA 30328
Phone (770) 705-0600
IMPORTANT VIN:
If for any reason YOU NO LONGER OWN THIS VEHICLE OR have a CHANGE OF ADDRESS, please COMPLETE THE SECTION BELOW, place in the ENCLOSED ENVELOPE, and DROP IN ANY MAIL BOX. If possible, provide the name and address of the present owner so that we may contact them.
16 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FREIGHTLINER | SPRINTER 1500 | 2018-2019 |
| FREIGHTLINER | SPRINTER 2500 | 2018-2019 |
| FREIGHTLINER | SPRINTER 3500 | 2018-2019 |
| FREIGHTLINER | SPRINTER 4500 | 2018-2019 |
| MERCEDES BENZ | SPRINTER 1500 | 2018-2019 |
| MERCEDES BENZ | SPRINTER 2500 | 2018-2019 |
| MERCEDES BENZ | SPRINTER 3500 | 2018-2019 |
| MERCEDES BENZ | SPRINTER 4500 | 2018-2019 |
12 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V665-8998.PDF 211.25KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V665-9716.PDF 211.145KB
Manufacturer Notices(to Dealers,etc)
RCMN-19V665-4175.pdf 600.751KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V665-6375.pdf 74.162KB
Recall Acknowledgement
RCAK-19V665-1600.pdf 244.945KB
Recall 573 Report- Amendment 1
RCLRPT-19V665-2118.PDF 214.579KB
Defect Notice 573 Report
RCLRPT-19V665-8816.PDF 214.583KB
Manufacturer Notices(to Dealers,etc)
RCMN-19V665-9663.pdf 1145.466KB
Manufacturer Notices(to Dealers,etc)
RCMN-19V665-3995.pdf 1144.445KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V665-7771.pdf 161.112KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V665-8988.PDF 211.318KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V665-3067.PDF 211.318KB
Latest Recalls Documents
- [Easy to UseโWork Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest softwareโno need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note๏ผThe device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When itโs an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You donโt need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you donโt need to pay extra money to buy a solid toolbox.
- ใReset ABS/SRS/Transmission/Engine Lightsใ More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- ใ3.5" Handheld Scanner with 4 System Diagnoseใ 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- ใOne-Click I/M Readines&Full OBD2 Functionsใ Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- ใBattery Voltage Check&DLC Pin Testใ It allows you to monitor battery health by monitoring current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- ใAutomotive Scanner Diagnostic Kitใ The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scannerโno guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for todayโs vehicles with strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW. Enhanced communication on select 2024+ Nissan and Mazda models (see compatibility chart).
- [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM 2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
- PAID FOR ITSELF ON THE FIRST USE - SKIP MORE DIAGNOSIS FEE: One visit to a dealership just for diagnosis can easily c-ost 200 or more before any repair begins. The NT614 Elite foxwell scanner brings professional vehicle diagnostics right to your driveway. Unlike basic code readers that only read check engine lights, it scans 4 critical systems โ Engine, ABS, SRS, and Transmission to pinpoint exactly where the problem is and why. Read and clear trouble codes and perform essential resets including ABS Bleeding, SAS Calibration, EPB Reset, Oil Reset, and Throttle Reset. Stop paying shops just to "take a look"
- UPGRADE OF NT604 - 5 ESSENTIAL RESET SERVICES, BRING 1000+ OF SHOP SERVICES HOME: Most 4-system car scanners stop at reading codes. The NT614 Elite obd2 scanner goes further by supporting 5 commonly used maintenance resets that repair shops often charge hundreds for: ABS Bleeding, EPB Reset, Oil Reset, SAS Calibration, Throttle Relearn. Just one brake service can offset the c-ost of the tool
- 15 SECONDS FAST DIAGNOSIS, SMART AUTOVIN, PLUG & PLAY: Simply plug into the OBD2 port, one click AUTOVIN, the code reader automatically retrieves your VIN and enters diagnostic mode in about 15 seconds. No complicated setup required. Instantly identify your vehicle and access the relevant systems. Whether you're a DIY car owner, beginner, or mechanic, you can quickly locate problems and make informed repair decisions. (NOTE: 1.A few cars need to manually enter the VIN. 2.Vehicles with CAN protocol support fast diagnosis in 15 seconds)
- PERFORM ABS BLEEDING AT HOME โ RESTORE BRAKE PEDAL FEEL: After replacing brake pads, calipers, or brake fluid, air can enter the brake system, causing a soft or sinking brake pedal and longer stopping distance. The NT614 Elite code reader for cars and trucks supports ABS Bleeding, helping remove trapped air from the brake lines and restore proper brake pressure. Maintain safer braking performance without a shop visit. (NOTE: A few cars don't support ABS Bleeding function, pls check it before purchase๏ผ
- LIVE DATA GRAPHING + BUILT-IN DTC LIBRARY + LIFETIME WiFi UPDATES: Not sure what a fault code means or how your sensors are performing? The NT614 Elite scanner for car displays real-time live data (RPM, speed, O2 sensors, transmission temp, and more) in easy-to-read graphs, helping you quickly spot abnormal fluctuations. The built-in DTC library explains trouble codes directly on screen-no phone or internet search required. You can save diagnostic data and print reports for further analysis or sharing with your mechanic. Simply connect to WiFi for lifetime free updates, with no SD card required
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicleโs specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.