Tire Pressure Gauge May Read Low – MAC Tools Tire Pressure Gauge

August 26, 2019 NHTSA CAMPAIGN NUMBER: 19E057000

Tire Pressure Gauge May Read Low

If the user relies on the inaccurate pressure and continues to inflate the tire, the tire may burst due over-pressure, increasing the risk of an injury.

 

NHTSA Campaign Number: 19E057

Manufacturer Stanley Assembly Technologies

Components EQUIPMENT

Potential Number of Units Affected 66,132

 

Summary

Stanley Assembly Technologies (SAT) is recalling certain MAC Tools DTG1000C, DTG1000, DTG1000B, DTG1000A, and DTG1014 tire pressure gauges sold exclusively though MAC independent dealers. The gauge may display a lower than actual pressure when the battery voltage is low.

 

Remedy

Signs will be posted in MAC trucks, and users will be compensated for each returned gauge. The recall began on October 14, 2019. Owners may contact SAT customer service at 1-614-876-3809.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


SEPTEMBER 17, 2019

September 2019
NHTSA Recall No. 19E-057

 

IMPORTANT SAFETY RECALL

 

Dear Mac Tools Distributor:

Stanley Industrial & Automotive, LLC, through its Mac Tools division (“Mac Tools”), has determined that a defect that relates to motor vehicle safety exists in certain Mac Tools tire pressure gauges.

Specifically, Mac Tools has discovered that the accuracy of our digital tire gauges degrades as battery voltage declines.  If the user does not replace the batteries when the low battery power icon is shown on the display, the pressure shown on the gauge will be lower than the actual pressure. If the user continues to inflate the tire, it may burst due to over-pressure, which could result in personal injury.

The affected gauges bear Model Numbers DTG1000, DTG1000A, DTG1000B, DTG1000C, and DTG1014.

According to our records, you may have sold one or more of the affected units.  It is important that all owners of the recalled products be notified of the recall.  Mac Tools has prepared an owner notification letter (attached to this notice), which has been approved by the National Highway Traffic Safety Administration (“NHTSA”).  This letter is to be given to all customers who have purchased the above Model Numbers.

Customers who have purchased any of the items listed above are asked to return the item for credit.  Distributors can then return credited items to Mac Tools using a Warranty MRA and receive credit for each one returned.  Shipping expense credit will be issued monthly for all returns received the previous month in the amount of $12 US.

Unsold units can also be returned on a Warranty MRA and you will receive return shipping reimbursement as described.

Mac Tools has prepared a notice with information about the recall that we would like you to display on your trucks. The attached notice is available in PDF form and can be printed and displayed.

IT IS A VIOLATION OF FEDERAL LAW TO SELL OR DELIVER A NEW OR USED ITEM OF EQUIPMENT COVERED BY THIS NOTIFICATION.

Mac Tools apologizes for any inconvenience this issue causes.  However, safety is our
primary consideration.  If you have any questions regarding this matter, please contact
Mac Tools at (800) 622-8665.

 

Sincerely,

Bill Moll
Director of Distribution Services

 


September 2019
NHTSA Recall No. 19E-057

 

IMPORTANT SAFETY RECALL

 

Dear Valued Customer:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.  Stanley Industrial & Automotive, LLC, through its Mac Tools division (“Mac Tools”), has decided that a defect that relates to motor vehicle safety exists in certain Mac Tools tire pressure gauges.

Specifically, Mac Tools has discovered that the accuracy of the gauge degrades as battery voltage goes down from use.  If the user does not replace the batteries when the low battery power icon is shown on the display, the pressure shown on the gauge will be lower than the actual pressure. If the user continues to inflate the tire, it may burst due to over-pressure, which could result in personal injury.

The affected gauges bear Model Numbers DTG1000, DTG1000A, DTG1000B, DTG1000C, and DTG1014, and were produced between March 01, 2016 and August 15, 2019.

According to our records, you may have purchased one or more of the affected units.  Please check your unit to see if it covered by this recall.

Model Numbers listed above should be returned to your Mac Tools Distributor for purchase price credit that can be used towards the purchase of other items.  If you do not have a Distributor, contact Mac Tools Customer Service at 1.800.MAC. TOOLs for directions on how to return your digital tire gauge and your credit.

We recommend that you check all tires that may have been pressurized with a covered pressure gauge while the low battery icon was flashing to ensure that they were properly pressurized.

If after contacting Mac Tools you are not satisfied that we have done our best to remedy this situation, you may submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590.  You may also call the toll‑free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.

Mac Tools apologizes for any inconvenience this issue causes.  If you have any questions regarding this matter, please contact Mac Tools at (800) 622-8665.

 

Sincerely,

Bill Moll
Director of Distributor Services

 


1 Affected Product

Equipment

BRANDPART NO.PRODUCTION DATES
MAC TOOLSTIRE PRESSURE GAUGE02/01/2016 – 01/01/2018

 


7 Associated Documents

Recall Quarterly Report #2, 2020-1

RCLQRT-19E057-1626.pdf 211.246KB

 


Defect Notice 573 Report

RCLRPT-19E057-4014.PDF 214.596KB

 


Recall Acknowledgement

RCAK-19E057-6126.pdf 245.1KB

 


Recall 573 Report – Amendment 1

RCLRPT-19E057-2642.PDF 214.611KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19E057-0982.docx 18.496KB


Manufacturer Notices(to Dealers,etc)

RCMN-19E057-2044.docx 20.44KB


Recall 573 Report – Amendment 2

RCLRPT-19E057-7304.PDF 214.648KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19E057&docType=RCL

 


 

SaleBestseller No. 1
ETENWOLF T300 Digital Tire Pressure Gauge 3-200 PSI, Industrial Tire Gauge Calibrated to ANSI B40.7 Grade 2A(Plus-Minus 0.5%), Replaceable AAA Batteries (Vivid Orange)
  • PROCESS LEVEL ACCURACY: Each ETENWOLF’s digital tire pressure gauge is calibrated manually to ANSI B40.7 Grade 2A(plus-minus 1 PSI).Presta valve adapter not included, if used for bicycles, it must be purchased separately
  • ACCURACY IN EXTREME PRESSURE RANGE: Whether tire pressure is below 12 PSI or above 140 PSI, ETENWOLF’s digital tire gauge is accurate as well
  • ACCURACY IN EXTREME WEATHER: Built-in AI chip with thermal compensation inside, ETENWOLF’s tire gauge works normally even in extreme cold or hot weather(-4°F-130°F/-20°C-54°C)
  • PRESSURE RANGE 3-200 PSI : ETENWOLF’s digital tire pressure gauge can measure pressure of all types of vehicles
  • REPLACEABLE AAA BATTERIES: Batteries are easy to replace and helps to extend the tire pressure gauge’s life span, with LED light to illuminate dark areas for easy tire pressure reading
SaleBestseller No. 2
ETENWOLF Pencil Tire Pressure Gauge 2 Pack (10-50PSI, 20-120PSI) with 16 Tire Caps Calibrated to ANSI B40.1 Grade B(2%), Stainless Steel Body, Car Accessories for Cars, Pickups, RVs, Bicycles
  • HIGH ACCURACY: Every ETENWOLF's pencil tire gauge is calibrated to ANSI B40.1 Grade B, it is accurate to 2% of span in the middle 50% of range and 3% of span in the lower and upper 25% of range. Each of ETENWOLF pencil tire pressure gauge is manually calibrated and has its unique calibration number printed on the pencil
  • WIDER RANGE: ETENWOLF's tire gauge offers 2 pressure ranges: 10-50PSI, 20-120PSI for all types of vehicles
  • ALL METAL: ETENWOLF tire gauges are made of all solid metal, zinc alloy head and stainless steel body, they are durable and can be used for many many years unless you lose them
  • DEFLATION: You can also use ETENWOLF's tire gauge to deflate tires when the tire pressure is over
  • 16 CAPS IN 2 CASES: ETENWOLF even offers 16 valve stem caps, so you won't worry about losing tire caps anymore
SaleBestseller No. 3
ETENWOLF Tire Pressure Gauge for Cars 0-75 PSI, Air Pressure Gauge with Large Glow Dial, Calibrated to ANSI B40.1 Grade A(Plus-Minus 1%), Tire Gauge for Tire Pressure Car Accessories (Black)
2,325 Reviews
ETENWOLF Tire Pressure Gauge for Cars 0-75 PSI, Air Pressure Gauge with Large Glow Dial, Calibrated to ANSI B40.1 Grade A(Plus-Minus 1%), Tire Gauge for Tire Pressure Car Accessories (Black)
  • PROCESS LEVEL ACCURACY: This heavy duty tire pressure gauge is calibrated manually to ANSI B40.1 Grade A (plus-minus 1% of span)
  • PRESSURE RANGE 0-75 PSI: ETENWOLF’s tire gauge can measure pressure of pickup, motorcycle, truck, bike, SUV, RV or ATV
  • EASY TO READ IN THE DARKNESS: The large glow dial helps you clearly read the pressure at night or in low light
  • EASY TO USE: 360 degree swivel chuck allows you to measure and take a reading from a tire valve at any angle
  • ACCURACY IN EXTREME WEATHER: PSI gauge works normally even in extreme cold or hot weather
SaleBestseller No. 4
AstroAI Pencil Tire Pressure Gauge 2 Pack 10-75PSI, Calibrated to ANSI B40.1 Grade B (2%), Stainless Steel Body, Car Accessories with 3 Measurements for Cars, Bikes, Vehicles
  • RUGGED DESIGN: The stainless steel components prevent rust and corrosion while the precision-crafted nozzle seamlessly seals onto the valve stems for highly accurate readings (±2% span). We also provide 4 valve stem caps for convenient replacement.
  • MEASURES PSI, kPa, BAR; Measurement range from 10-75 PSI, 70-550 kPa, 0.7-5.5 BAR. Attention! Do not exceed the maximum pressure of the gauge, doing so will permanently damage the device.
  • UNIVERSAL APPLICATION: Not only are these gauges easy to use, but include an integrated deflator valve, chuck, and ABS indicator bar
  • CONVENIENT DESIGN stows easily in a glove box, tool belt, workbench, or even a pocket; the pocket clip makes it easy to carry with you while on the job
  • Further service provided by AstroAI, BATTERY FREE means no maintenance and total reliability under all weather conditions; a necessary tool for roadtrips and optimal safety
SaleBestseller No. 5
AstroAI Digital Tire Pressure Gauge 0-150PSI Calibrated to ANSI B40.7 +/-1PSI, Accurate in 0.1 Increments, Tire Repair Tools 4 Pressure Measurements for Car Truck with Backlight LCD, Silver
  • Accurate, Dependable Readings: Factory‑calibrated to ±1 PSI, so you can confidently match your vehicle’s recommended PSI (check the door jamb sticker). Ideal for monthly checks and road trips — consistent results every time, cold or warm.
  • Bright Backlit Display & Nozzle Light: The illuminated nozzle helps you find the valve stem in the dark, while the backlit LCD makes readings crystal clear in dim garages or at night. No more squinting or holding a flashlight.
  • 4 Measurement Units, One Button: Quickly switch among PSI, Bar, Kgf/cm², and KPA with a single press. No complex settings — just press and cycle to your preferred unit. Perfect for drivers who need multiple scales.
  • Broad Compatibility for Everyday Vehicles: 0–150 PSI covers cars, SUVs, motorcycles, and spare tires (often 60 PSI). Fits standard Schrader valves; just press on for a reading.
  • Auto‑Off to Extend Battery Life: The gauge automatically powers down after 30 seconds of inactivity, so the included 3 LR44 batteries last longer. Always ready for your monthly checks without surprise dead batteries.

Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...