November 25, 2019 NHTSA CAMPAIGN NUMBER: 19V845000
If the LP tank dislodges while the motorhome is in transit, it can increase the risk of a crash with the ignition of the propane.
NHTSA Campaign Number: 19V845
Manufacturer Jayco
, Inc.
Components EQUIPMENT
Potential Number of Units Affected 398
Summary
Jayco
, Inc. (Jayco
) is recalling certain 2018-2020 Melbourne Prestige motorhomes. The liquid propane (LP) tank hangers may be the wrong size and have insufficient welding, allowing the LP tank to dislodge.
Remedy
Jayco
has notified owners, and dealers will install a support bracket on each side of the propane tank, free of charge. The recall began December 9, 2019. Owners may contact Jayco
customer service at 1-800-517-9137. Jayco
’s number for this recall is 9903501.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
LP Tank Support Brackets
| Bulletin Type: | SAFETY RECALL | Publication Date: | December 2019 |
| Recall #: | Jayco | Make: | Jayco |
| Job Code: | 9903501 | Model: | Melbourne Prestige Qwest |
| Flat Rate: | .5 Hour | Model Year(s): | 2018-2020 |
| Incident: | The hanger supports for the propane tank may fail without warning due to incorrect material and improper welds. |
| Affected Units: | 2018 Melbourne Prestige J1ZK0051-0095 ZL0051-0112
2019 Melbourne Prestige K1ZA0051-00195 ZK0051-0115 ZL051-0188 2020 Melbourne Prestige L1ZA0001-0010 ZK0051-0068 ZL0001-0025 ZL0051-0110 ZT0051-0079 ZR0051
2018 Entegra Qwest J1CK8051-8071 CL8051-8082 2019 Entegra Qwest K1ZA8051-8109 ZK8051-8105 ZL8051-8236 2020 Entegra Qwest L1ZA8051-8062 ZK8051-8082 ZL8051-8143 ZR8051 ZT8051 |
| Parts Kit: | Parts Kit #: 19V-845/846 |
| 2 LP Support Brackets with tape applied – do not remove the tape
8 Screws, Hex #14 x 1” with neo bond washer, self-drilling | |
| Misc. Tools & Supplies: | Screw gun
3/8” nutsetter bit
|
INSTRUCTIONS – Install LP Support Brackets (2)
FIG 1:
- Open the LP tank compartment door of the vehicle.
FIG 2:
- Brackets from Parts Kit, with tape applied around the top (back & front), and around each small tab (top side contacting the LP tank rail). The tape is required to prevent galvanic corrosion from dissimilar metals. DO NOT REMOVE TAPE FROM BRACKETS.
- Brackets are identical. It does not matter at which end of the tank they are mounted.
FIG 3:
- Place the support bracket up from underneath and between the two aluminum tubes that support the LP tank. The two small tabs of the support bracket must be in contact with the underside of the LP tank support rails.
NOTE: When placing the bracket up between the rails; make sure the two tabs at the bottom fit flush up against the mounting rails. If the tabs hit the rail support L bracket, you may have to rotate the LP support bracket 180 degrees so the tabs will fit flush against the support rails.
FIG 4:
- Install two Hex screws from the parts kit in the top holes of the support bracket.
FIG 5:
- Install one Hex screw from the parts kit, up underneath each of the bottom tabs (2) of the support bracket and into the LP tank support rail. (Total of 4 Hex screws for each support bracket) FIG 6:
- Place the second support bracket up between the LP tank mounting rails on the opposite end of the LP tank as shown.
FIG 7:
- Install 2 Hex screws from the parts kit, into the two holes on the top of the bracket. Make sure the bottom 2 tabs of the bracket are up against the underside of the support tubes before securing the upper screws.
FIG 8:
- Install one Hex screw from the parts kit up underneath each of the bottom tabs (2) of the support bracket and into the LP support rail. (Total of 4 Hex screws for each support bracket)
Safety Recall: 19V-845
Date: December 2019
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle «Unit»
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco
has decided that a defect, which relates to motor vehicle safety, exits in certain Model Year 20182020 Jayco
, Melbourne Prestige Class C Motorhomes.
| Reason for this recall | The hanger supports for the propane tank may fail without warning due to incorrect material and improper welds. Hanger failure could allow the tank to drop under the coach during transit, increasing the risk of an accident and a fire hazard.
To reduce the risk of failure until this recall is complete; do not fill LP tanks beyond 50%. |
| Recall Remedy | Installation of additional support bracket to reinforce the propane tank hangers. |
| What you need to do | Please contact an authorized Dealer as soon as possible to schedule an appointment. The Recall Remedy is free of charge and should take approximately thirty minutes to complete. |
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 800-517-9137. If you are unable to get this safety defect remedied without charge and/or within a reasonable amount of time after contacting your dealer and customer service you may want to contact NHTSA. To submit a written complaint contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Jayco
Motorized
Safety Recall: 19V-845
December 2019
IMPORTANT SAFETY RECALL
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco
has decided that a defect, which relates to motor vehicle safety, exits in certain Model Year 2018-2020 Jayco
, Melbourne Prestige Class C Motorhomes.
| Reason for this recall | The hanger supports for the propane tank may fail without warning due to incorrect material and improper welds. Hanger failure could allow the tank to drop under the coach during transit, increasing the risk of an accident and a fire hazard.
To reduce the risk of failure until this recall is complete; do not fill LP tanks beyond 50%. |
| Recall Remedy | Installation of additional support brackets to reinforce the propane tank hangers. |
| All pertinent information regarding this recall is available under the Service and Parts Tab of our Website. If you need further assistance, please Contact Customer Service at 800-517-9137. | |
| What we need you to do | Our records show the following unit as affected by this recall, and as part of the current inventory at your Dealership. Federal law requires the Recall Remedy completed on this unit prior to customer delivery. |
VIN
If you sold this unit recently, please contact the owner immediately to inform them of this recall. In addition, please register this unit by submitting the Warranty Registration information.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Jayco
Motorized
SEOCONTENT-START
19V-845/846 LP Tank Support Brackets December 2019 Page 1 of 3
LP Tank Support Brackets
Incident:
The hanger supports for the propane tank may fail without warning due to
incorrect material and improper welds.
Affected Units:
2018 Melbourne Prestige J1ZK0051-0095 ZL0051-0112
2019 Melbourne Prestige K1ZA0051-00195 ZK0051-0115 ZL051-0188
2020 Melbourne Prestige L1ZA0001-0010 ZK0051-0068 ZL0001-0025
ZL0051-0110 ZT0051-0079 ZR0051
2018 Entegra Qwest J1CK8051-8071 CL8051-8082
2019 Entegra Qwest K1ZA8051-8109 ZK8051-8105 ZL8051-8236
2020 Entegra Qwest L1ZA8051-8062 ZK8051-8082 ZL8051-8143 ZR8051
ZT8051
Parts Kit:
Parts Kit #: 19V-845/846
2 LP Support Brackets with tape applied – do not remove the tape
8 Screws, Hex #14 x 1” with neo bond washer, self-drilling
Misc. Tools & Supplies:
Screw gun
3/8” nutsetter bit
Bulletin Type: SAFETY RECALL
Recall #:
Jayco
19V-845 US 2019-595 CN
Entegra 19V-846 US 2019-596 CN
Job Code: 9903501
Flat Rate:
.5 Hour
Publication
Date:
December 2019
Make:
Jayco![]()
Entegra
Model:
Melbourne Prestige
Qwest
Model Year(s): 2018-2020
19V-845/846 LP Tank Support Brackets December 2019 Page 2 of 3
FIG 1:
Open the LP tank compartment door of the vehicle.
FIG 2:
Brackets from Parts Kit, with tape applied around the top (back & front), and around each small
tab (top side contacting the LP tank rail). The tape is required to prevent galvanic corrosion from
dissimilar metals. DO NOT REMOVE TAPE FROM BRACKETS.
Brackets are identical. It does not matter at which end of the tank they are mounted.
FIG 3:
Place the support bracket up from underneath and between the two aluminum tubes that support
the LP tank. The two small tabs of the support bracket must be in contact with the underside of
the LP tank support rails.
NOTE: When placing the bracket up between the rails; make sure the two tabs at the bottom fit flush
up against the mounting rails. If the tabs hit the rail support L bracket, you may have to rotate the LP
support bracket 180 degrees so the tabs will fit flush against the support rails.
FIG 4:
Install two Hex screws from the parts kit in the top holes of the support bracket.
INSTRUCTIONS – Install LP Support Brackets (2)
FIG 1 FIG 2
FIG 3 FIG 4
19V-845/846 LP Tank Support Brackets December 2019 Page 3 of 3
FIG 5:
Install one Hex screw from the parts kit, up underneath each of the bottom tabs (2) of the support
bracket and into the LP tank support rail. (Total of 4 Hex screws for each support bracket)
FIG 6:
Place the second support bracket up between the LP tank mounting rails on the opposite end of
the LP tank as shown.
FIG 7:
Install 2 Hex screws from the parts kit, into the two holes on the top of the bracket. Make sure the
bottom 2 tabs of the bracket are up against the underside of the support tubes before securing
the upper screws.
FIG 8:
Install one Hex screw from the parts kit up underneath each of the bottom tabs (2) of the support
bracket and into the LP support rail. (Total of 4 Hex screws for each support bracket)
FIG 5 FIG 6
FIG 7 FIG 8
3 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| JAYCO | MELBOURNE PRESTIGE | 2018-2020 |
10 Associated Documents
Recall Quarterly Report #3, 2020-2
RCLQRT-19V845-0520.PDF 211.309KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V845-1597.PDF 211.121KB
Remedy Instructions and TSB
RCRIT-19V845-8456.pdf 676.169KB
Defect Notice 573 Report
RCLRPT-19V845-1450.PDF 213.089KB
Recall Quarterly Report #2, 2020-1
RCLQRT-19V845-7258.PDF 211.22KB
Recall Acknowledgement
RCAK-19V845-5332.pdf 244.703KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V845-8756.pdf 50.787KB
Miscellaneous Document-19V-845 846 Order Form
RMISC-19V845-2013.pdf 157.673KB
Manufacturer Notices(to Dealers,etc)
RCMN-19V845-4261.pdf 186.977KB
Recall Quarterly Report #4, 2020-3
RCLQRT-19V845-8576.PDF 211.414KB
Latest Recalls Documents
- Whether camping in the great outdoors or tailgating in town, the Propane Camping Cylinder is perfect for on-the-go cooking, grilling, heating and lighting
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





